Our Brands

GC Waldom

1 2
Newest Items First
64 Per Page
22-023 Silver Print - 1/2 Troy oz.
22-023 Silver Print - 1/2 Troy oz.
CA$103.69
These are for PC repair or add-on circuit traces. Pure silver in laquer based carrier may be brushed on for either conductors or shielding. Connections have equal or better conductivity than copper (0.1 ohms per square).
In stock
+ −
Add to wish list
22-222 Resist Ink Pens fine line - draws lines as thin as 1/64" wide
22-222 Resist Ink Pens fine line - draws lines as thin as 1/64" wide
CA$7.23

Black felt tip pens for marking nomenclature and touching up photo artwork or etch resist circuits directly on the PC board or on the positive.

 
In stock
+ −
Add to wish list
10-284 Needle Tip Chemical Bottle - 4 oz
10-284 Needle Tip Chemical Bottle - 4 oz
CA$6.95
Use polyethylene bottles for trouble-free dispensing of oils, mixtures & other liquids.
In stock
+ −
Add to wish list
10-4202 Liquid Solder Flux
10-4202 Liquid Solder Flux
CA$19.98
This is a 2oz bottle of liquid solder flux for your soldering applications. Completely non-corrosive liquid solder flux consisting of a solution of special rosin in alcohol.
In stock
+ −
Add to wish list
902-073 Tool Spring Hook Tool - 8 1/2"
CA$10.69
This is the perfect tool for assembly of drive belts or assembly and disassembly of springs. On 1 end is the hook design for pulling. The opposite end is designed for pushing.
In stock
+ −
Add to wish list
22-275 GC Tool Drill Bit Set
22-275 GC Tool Drill Bit Set
CA$10.14
This is a set of 3 drill bits made of high speed tool steel for long life for drilling holes in phenolic and glass epoxy PC boards. #60: .033", #66: .044", #1/16: .0625".
In stock
+ −
Add to wish list
22-276 GC Tool Drill Bit Set
22-276 GC Tool Drill Bit Set
CA$10.76
This is a set of 3 drill bits made of high speed tool steel for long life for drilling holes in phenolic and glass epoxy PC boards. #31: .12". #27: .14". #3/32: .0938".
In stock
+ −
Add to wish list
12-4140 GC Tool 36 - 40 Pins Anti-Static Integrated Circuit Insertion Tool
12-4140 GC Tool 36 - 40 Pins Anti-Static Integrated Circuit Insertion Tool
CA$25.60
This is an anti-static IC insertion tool for all popular DIP style integrated circuits. The narrow design permits insertion on crowded boards, as well the handle has pin straightener molded in for respective integrated circuit sizes.
In stock
+ −
Add to wish list
12-4612 GC Tool 28-40 Pin Grounded DIP IC Extractor
12-4612 GC Tool 28-40 Pin Grounded DIP IC Extractor
CA$45.76
This is a simple device by placing the tool on the socket and depressing the plunger, one has instant and accurate extraction. Conductive finish with gorund strap connection point. Will remove 28 to 40 pin integrated circuit.
In stock
+ −
Add to wish list
32-3116 BNC Male To N Male
32-3116 BNC Male To N Male
CA$5.51
The 32-3116 is an BNC Male to N Type Male.
In stock
+ −
Add to wish list
32-436 F Male Termination
32-436 F Male Termination
CA$0.68
The 32-436 is an F Male Termination.
In stock
+ −
Add to wish list
10-8118 Heat Sink Compound
10-8118 Heat Sink Compound
CA$12.40
The Heat Sink Compound Type 44 is a superior heat transferring compound capable of moving more heat than silicone & Olefin products.
In stock
+ −
Add to wish list
10-8106 Heat Sink 1 LB Silicone Z9
10-8106 Heat Sink 1 LB Silicone Z9
CA$44.01
This is industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden.
In stock
+ −
Add to wish list
10-8109 Heat Sink 1 OZ Silicone Z9
10-8109 Heat Sink 1 OZ Silicone Z9
CA$14.95
This is industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden.
In stock
+ −
Add to wish list
CTVP-1000 Cable Tie Kit-4 inch
CTVP-1000 Cable Tie Kit-4 inch
CA$15.31

This Deluxe Cable Tie Kit by GC Electronics contains 1000 assorted colored 4 inch cable ties in a handy carrying case.

In stock
+ −
Add to wish list
35-750 SPST Magnetic Proximity Switch
35-750 SPST Magnetic Proximity Switch
CA$7.20

These magnetic proximity switches are used in windows and doors for security devices. Contact rating: 0.5A@20VAC/VDC; 0.08A@120VAC. Terminal type: Screw. Terminal Material: Plated Steel. Contact Material: Gold Plated Iron Alloy. 

In stock
+ −
Add to wish list
22-500 Plug-In IC Prototype Board
22-500 Plug-In IC Prototype Board
CA$10.76
IC's plug directly into board. 0.1" spacing accepts 14 pins or 16 pins IC's, up to 20 pins IC's. Silver plated lands with 24-way card edge connector plug on one end. Made of tough phenolic. 0.1" centers x 23/8" wide x 4" long x 1/16" thick, .035" holes.
In stock
+ −
Add to wish list
22-504 Design Protoype Board
22-504 Design Protoype Board
CA$10.76
This Design Protoype Board accommodates all types of IC's, transistor packages and passive parts. Lands and buss bars are tin-plated. 0.1" centers x 31/8" wide x 51/16" long x 1/16" thick.
In stock
+ −
Add to wish list
J4-404 PC Board (22-508)
J4-404 PC Board (22-508)
CA$26.37

Ready-to-use copper plated printed circuit board has 550 solder tie-points, 94 five-point terminals and two 40-point buss strips on 0.3" centers. Phenolic board has pre-punched holes mounting holes. 2" wide x 6" long x 3/8" thick.

In stock
+ −
Add to wish list
22-392 Etching Solution Heater
22-392 Etching Solution Heater
CA$30.70
Fits in tank and heats solution up to 38°C (100°F). Used to further reduce etching time. Built-in adjustable thermostat controls temperature continuously to 100°F. 120V AC/100 W Max.
In stock
+ −
Add to wish list
22-511 Pure Copper Circuit Tape
22-511 Pure Copper Circuit Tape
CA$18.38
This is a 1/8" wide 20 foot roll of self-adhesive pure copper tape for quick repairs or circuit modification. Adheres readily to PC boards and similar surfaces; solders readily.
In stock
+ −
Add to wish list
22-283 PC Board Tongs
22-283 PC Board Tongs
CA$7.62
Designed for lifting PC boards from etching solution to check etch or for removing boards from the etchant.
In stock
+ −
Add to wish list
806 Nibbling Tool
806 Nibbling Tool
CA$16.91
It will cut any size or shape contour, starting from the edge or from a 3/8" inside hole. This deluxe version is a spring operated nibbler which withdraws the punch from the metal, thereby speeds up the cutting. This tool cuts steel up to 18 gauge (0.046") as well as copper, brass, aluminum and plastics up to 1/16" (0.062").
In stock
+ −
Add to wish list
9089 Thin End Steel Tip Tool
9089 Thin End Steel Tip Tool
CA$4.60
Material: Butyrate Shaft: 7/32" (5.5mm) dia., 15/16" (2.4cm) long Ends: 1/8" (3.2mm) wide steel tip, 3/4" knurled tip Total Length: 5 13/16" (14.8cm).
In stock
+ −
Add to wish list
9293 Double-Ended Long Screwdriver
9293 Double-Ended Long Screwdriver
CA$6.14
Material: Fibreglass Shaft: 5/32" (4mm) dia., 12" (30.5cm) long Ends: 1/32" thick screwdriver tip (both ends) Total Length: 12" (30.5cm).
In stock
+ −
Add to wish list
Double Sided Hex tool
Double Sided Hex tool
CA$3.01
Material: Delrin Ends: ¼" long Hex, 0.096" dia. shaft; 3/8" long Hex, undercut (0.068" dia.) shaft to reach bottom slugs in coils Total Length: 5" (12.7cm).
In stock
+ −
Add to wish list
9440 Square and Hex End Tool
9440 Square and Hex End Tool
CA$2.45
Material: Delrin Ends: 0.100" (2.5mm) Hex, 3/8" (9.5mm) long; 1/16" (0.062" - 1.6mm) square, 1/32" (0.1cm) long Total Length: 5 1/16" (12.8cm).
In stock
+ −
Add to wish list
2520-Tool Duplex Alignment Screwdriver
2520-Tool Duplex Alignment Screwdriver
CA$3.69
Material: Delrin Shaft: Long End 7/32" (5.5mm) dia., 1" (2.5cm) long Ends: 1/32" Thick Screwdriver Tip (Both Ends) Total Length: 7" (17.7cm).
In stock
+ −
Add to wish list
5000 Metal Tip Alignment Screwdriver
5000 Metal Tip Alignment Screwdriver
CA$3.01
Material: Butyrate Shaft: 7/32" (5.5mm) dia., 5 1/8" (13cm). Long Ends: 1/8" (3.2mm) Wide Steel Tip; 3/4" Kurled Tip Total Length: 61/8" (15.5cm).
In stock
+ −
Add to wish list
5004 No-Metal Insulating Adjustment Screwdriver
5004 No-Metal Insulating Adjustment Screwdriver
CA$3.01

Material: Delrin. Shaft: ¼" (6.3mm) dia., 7" (17.7cm) long Ends. 1/32" Thick Screwdriver Tip (Both Ends).

In stock
+ −
Add to wish list
5009 Duplex No-Metal Alignment Screwdriver
5009 Duplex No-Metal Alignment Screwdriver
CA$4.09
Material: Delrin. Shaft: Long End 1/4" (6.3mm) dia., 5 ¼" (13.3cm) long Short End 1/8" (3.2mm) dia., 3/4" (1.9cm) long. Ends: 1/32" Thick Screwdriver Tip (both ends). Total Length: 6" (15.2cm).
In stock
+ −
Add to wish list
8282 Hex-Screwdriver Combination
8282 Hex-Screwdriver Combination
CA$3.23
Material: Delrin. Ends: Screwdriver (Plastic) 1/8" Blade; ¼" long Hex, undercut (0.095" dia.) shaft to reach bottom slugs in coils. Total Length: 5 7/16" (13.8cm).
In stock
+ −
Add to wish list
8606 Hex and Special Tip Tool
8606 Hex and Special Tip Tool
CA$4.60
Material: Delrin Ends: Flat screwdriver tip (0.027" thick-95" wide), followed by 0.100" Hex, 7/32" long, Undercut shaft to reach bottom slugs in coils. Total Length: 5 3/32" (12.9cm).
In stock
+ −
Add to wish list
8608 Potentiometer Adjustment Tool
8608 Potentiometer Adjustment Tool
CA$4.73
Material: Nylon Shaft: ¼" (6.3mm) dia. 4 15/16" (12.5cm) long Ends: 0.85" (2.2mm) wide steel tip; 0.85" (2.2mm) wide steel tip, recessed .040" Total Length: 4 15/16" (12.5cm).
In stock
+ −
Add to wish list
12-460 GC Tool Crimping Tool for D - Sub Connectors
12-460 GC Tool Crimping Tool for D - Sub Connectors
CA$27.42

This is a crimping tool for D Sub connectors that crimps both standard solderless terminals (10 - 22 AWG) and D-Subminiature contacts. Tool is all steel with black parkerized finish and cushion grip handles.

In stock
+ −
Add to wish list
12-465 GC Tool Heavy Duty Insulated Terminal Crimper, Stripper & Cutter
12-465 GC Tool Heavy Duty Insulated Terminal Crimper, Stripper & Cutter
CA$54.00
Manufactured of heavy gauge steel for frequent, heavy-duty usage. Crimps all standard solderless terminals that fit wire sizes  10 - 20 AWG. Unique design permits consistent, solid crimps and adds leverage to reduce hand fatigue. Includes cutting and stripping jaws.
In stock
+ −
Add to wish list
12-450 GC Tool Coax Crimp Tool
12-450 GC Tool Coax Crimp Tool
CA$15.26
This is a 8" coax crimping tool made of tempered steel designed for RG-59, 6 and RG-11 coaxial cable. The compound action and heavy cushioned handles makes crimping effortless.
In stock
+ −
Add to wish list
12-463 GC Tool IDC Crimping Tool
12-463 GC Tool IDC Crimping Tool
CA$29.95
This is an IDC crimping tool designed for crimping many styles of I.D.C. connectors onto flat cables (A.K.A. Ribbon Cable). Works with card edge connectors. All steel with cushion grips.
In stock
+ −
Add to wish list
12-7070 GC Tool 5 Piece Plier Set-4"
12-7070 GC Tool 5 Piece Plier Set-4"
CA$39.01
This is a 5 piece of 4" precision stainless steel plier set.
In stock
+ −
Add to wish list
12-7072 GC Tool Micro Snub Nose Cutting Nipper - 4"
12-7072 GC Tool Micro Snub Nose Cutting Nipper - 4"
CA$10.99
This is a 4" micro snub nose cutting cutter to se for cutting soft, copper wire up to 1.2mm and for trimming components and are useful for close work where blade thickness must be minimal.
In stock
+ −
Add to wish list
10-1206 Luberex - 2 oz.
10-1206 Luberex - 2 oz.
CA$7.97
This is a superior calcium stearate base grease compound for general use in industry, the shop or at home.
In stock
+ −
Add to wish list
10-8108 Heat Sink 6.5G Silicone Z9
10-8108 Heat Sink 6.5G Silicone Z9
CA$9.95
This is industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden. Meets Mil. Spec. C-47113.
In stock
+ −
Add to wish list
10-150 Silicone Rubber Adhesive/Sealant - 3 fl. oz. (90ml.) tube with dispensing nozzle
10-150 Silicone Rubber Adhesive/Sealant - 3 fl. oz. (90ml.) tube with dispensing nozzle
CA$7.97
One-component elastomer cures to a tough, rubbery solid when exposed to moisture in the air.
In stock
+ −
Add to wish list
10-302 Service Cement - 2oz (59 ml) bottle with brush
10-302 Service Cement - 2oz (59 ml) bottle with brush
CA$19.85
A quick-drying and waterproof clear adhesive which forms a strong, hard but vibration-resistant bond with minimal shrinkage.
In stock
+ −
Add to wish list
19-1902 GC DE-OX-ID - 2 oz
19-1902 GC DE-OX-ID - 2 oz
CA$15.37
This is a 2 oz. (59ml.) bottle of solventless, light oil based contact treatment compound with active ingredients to counteract oxidation.
In stock
+ −
Add to wish list
1 2