Our Brands

Adafruit

1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 21
Sort by Popularity
15 Per Page
1752-ADA Stereo 20W Class D Audio Amplifier - MAX9744
1752-ADA Stereo 20W Class D Audio Amplifier - MAX9744
US$34.92
This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease.
In stock
+ −
Add to wish list
1905-ADA Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger
1905-ADA Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly charger
US$12.17
This little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MiniUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. 
In stock
+ −
Add to wish list
2750-ADA Lithium Ion Polymer Battery - 3.7v 350mAh
US$12.17
The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.
In stock
+ −
Add to wish list
326 Monochrome 128x64 OLED graphic display
326 Monochrome 128x64 OLED graphic display
US$34.13
These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip.
In stock
+ −
Add to wish list
1824-ADA 3x4 Phone-style Matrix Keypad
US$13.13
This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of plastic with sturdy plastic buttons. The keys are connected to a matrix so you only need 7 microcontroller pins (3-columns and 4-rows) to scan through the pad.
In stock
+ −
Add to wish list
360 MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB
360 MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB
US$4.38
This is a blank MiFare Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
Delivery within 2-3 weeks
+ −
Add to wish list
390-ADA USB / DC / Solar Lithium Ion/Polymer charger - v2
390-ADA USB / DC / Solar Lithium Ion/Polymer charger - v2
US$26.95
NOTE: This product is only designed for use with solar panels sold at the Adafruit store. We cannot guarantee this will work with solar panels purchased elsewhere. This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. 
Delivery within 2-3 weeks
+ −
Add to wish list
Aluminum SMT Heat Sink - 0.26"x0.26" square - 0.39" tall
US$2.02
The heat sink is a 0.26" x 0.26" (6.75mm x 6.75mm) square with 3 tall 'fins' sticking out the top. The total height is 0.39" (10mm) but you can easily file it down if you need a shorter heat sink to fit in a case).
In stock
+ −
Add to wish list
14 MintyBoost Kit - v3.0
14 MintyBoost Kit - v3.0
US$34.13
Make your own iPod/iPhone/GPS/etc... battery-pack and recharger! This project includes all the electronic parts necessary to build your own MintyBoost: a small & simple (but very powerful) USB charger for your iPod (or other mp3 player), camera, cell phone, and any other gadget you can plug into a USB port to charge.
In stock
+ −
Add to wish list
1788-ADA Adafruit "Music Maker" MP3 Shield for Arduino w/3W Stereo Amp
1788-ADA Adafruit "Music Maker" MP3 Shield for Arduino w/3W Stereo Amp
US$54.95
Bend all audio files to your will with this shield! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). 
In stock
+ −
Add to wish list
2050-ADA 3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket
US$55.93
This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
Delivery within 2-3 weeks
+ −
Add to wish list
1736-ADA Mini Chiclet Keyboard - USB Wired - Black
1736-ADA Mini Chiclet Keyboard - USB Wired - Black
US$26.17
Add a good quality, slim keyboard to your Raspberry Pi, Beagle Bone Black or other mini-computer with this sleek black chiclet keyboard. It's a full QWERTY keyboard with a USB cable and is compatible with all operating systems.
In stock
+ −
Add to wish list
PiTFT Plus 480x320 3.5" TFT+Touchscreen for Raspberry Pi
US$69.30
It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer "2x20 connector" Raspberry Pi's. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
Delivery within 2-3 weeks
+ −
Add to wish list
2350-ADA APA102 5050 Warm White LED w/ Integrated Driver Chip - 10 Pack - ~3000K
US$9.53
This tiny 5050 (5mm x 5mm) SMD LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design.
Delivery within 2-3 weeks
+ −
Add to wish list
744 Waterproof Polarized 4-Wire Cable Set
744 Waterproof Polarized 4-Wire Cable Set
US$4.38
We now have very useful 4-wire polarized cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!).
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 21