Our Brands

Adafruit

1 2 3 4 5 6 7 8 9 10 11 12 13 14
8 - 22
Newest Items First
15 Per Page
FTDI Serial TTL-232 USB Type C Cable - 5V Power and Logic
US$30.95
This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. Useful whenever you want to communicate with a TTL serial device and the pinout will match up exactly to any 'FTDI' 6-pin header.
In stock
+ −
Add to wish list
Adafruit 1.14" 240x135 Color TFT Display + MicroSD Card Breakout - ST7789
US$21.61
This lovely little display breakout is the best way to add a small, colorful and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.14" display has 240x135 16-bit full color pixels and is an IPS display, so the color looks great up to 80 degrees off axis in any direction.
In stock
+ −
Add to wish list
5-pin JST SM Plug + Receptacle Cable Set
US$2.39
These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 5 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
6-pin JST SM Plug + Receptacle Cable Set
US$2.39
These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 6 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
JST PH 2-Pin Cable – Male Header 200mm
US$1.29
Plugs in nicely with our Li-Poly batteries, it even has the right color coding!
In stock
+ −
Add to wish list
JST PH 3-Pin Socket to Color Coded Cable - 200mm
US$1.49
This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded!
In stock
+ −
Add to wish list
JST PH 3-pin Plug to Color Coded Alligator Clips Cable
US$2.99
This cable has a JST PH 3-pin on one side and alligator clips on the other, so it could be used to connect to wires or pads like that on the Circuit Playground or micro:bit.
In stock
+ −
Add to wish list
FTDI Serial TTL-232 USB Type C Cable - 3V Power and Logic
US$30.73
This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. Useful whenever you want to communicate with a TTL serial device such as an Arduino Pro Mini or ESP breakout, and the pinout will match up exactly to any 'FTDI' 6-pin header.
Delivery within 2-3 weeks
+ −
Add to wish list
Assembled DC Motor + Stepper FeatherWing Add-on
US$32.60
This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight!
In stock
+ −
Add to wish list
Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz - RadioFruit
US$48.91
This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi.
In stock
+ −
Add to wish list
Adafruit PDM Microphone Breakout with JST SH Connector
US$7.63
The first thing to note is that this sensor does not provide an 'analog' output like many of our electret microphone assemblies. So it's great for chips that do not have analog inputs. Secondly, the digital interface is a very simplistic pulse density modulation output. It's digital but its notPWM and it's not I2S. You will need to make sure your chip has a PDM interface - most 32-bit processors these days do!
In stock
+ −
Add to wish list
Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header
US$12.25
It has the Cobbler baked right in. Simply solder the 2x20 box header in, and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk. This version is for modern Raspberry Pi computers with 2x20 connectors such as the Pi B+, A+, 2, 3, 4, Zero, etc!
In stock
+ −
Add to wish list
Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header
US$9.17
This product has the Cobbler baked right in. Simply solder the 2x20 box header in, and you get all the labeled breakouts with extra prototyping space, power rails, mounting holes and that gorgeous silk. This version is for modern Raspberry Pi computers with 2x20 connectors such as the Pi B+, A+, 2, 3, 4, Zero, etc!
In stock
+ −
Add to wish list
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
US$19.95
Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite Feather (like the Feather M4) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32. This chip can handle all the heavy lifting of connecting to a WiFi network and transferring data from a site, even if its using the latest TLS/SSL encryption (it has root certificates pre-burned in).
Delivery within 2-3 weeks
+ −
Add to wish list
USB C to USB C Cable - USB 3.1 Gen 4 with E-Mark - 1 meter long
US$15.33
As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs! USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has inserted USB correctly the first time? Works great with any device that has a USB C port.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14
8 - 22