Our Brands

Adafruit

12 - 26
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
28 - 42
Sort by Popularity
15 Per Page
820-ADA Micro Switch w/Wire - Three Terminals
820-ADA Micro Switch w/Wire - Three Terminals
US$5.17
This microswitch has a 3" long wire lever actuator and three terminals. Sometimes called 'coin switches' - they're used in coin detectors. The terminals are along the bottom (the other microswitches have them on the sides).
In stock
+ −
Add to wish list
1643-ADA NeoPixel Ring - 12 x WS2812 5050 RGB LED with Integrated Drivers
1643-ADA NeoPixel Ring - 12 x WS2812 5050 RGB LED with Integrated Drivers
US$13.13
12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another.
In stock
+ −
Add to wish list
1496-ADA Cold 2-Wire Splice (UY) - 10 pack
1496-ADA Cold 2-Wire Splice (UY) - 10 pack
US$5.17
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1801-ADA 3.5mm (1/8") Stereo DIY "Free-Hanging" In-Line Jack
1801-ADA 3.5mm (1/8") Stereo DIY "Free-Hanging" In-Line Jack
US$3.42
Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great jack to make your own cable with. it's made out of durable metal with a flexible, sturdy spring for strain-relief.
In stock
+ −
Add to wish list
2880-ADA 2-pin JST SM Plug + Receptacle Cable Set
US$1.32
These 2-wire cables are 16cm long and come as a set.  One side has a 2-pin JST SM type connector plug on the end.  The other side has a matching 2-pin JST SM type receptacle connector.  They are good for whenever you have 2 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
2222-ADA GPIO Header for Raspberry Pi B+ - 2x20 Female Header
US$2.63
Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.
In stock
+ −
Add to wish list
2029-ADA Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3
US$12.17
It's an add on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This will make "cobbling together" prototypes with the Pi super easy.
In stock
+ −
Add to wish list
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
US$8.67
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, four identical plugs to use!
In stock
+ −
Add to wish list
149-ADA Solder wick - 3S 5ft.
149-ADA Solder wick - 3S 5ft.
US$5.25
5ft spool - Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up.
In stock
+ −
Add to wish list
411 2.1mm to 1.7mm DC jack adapter
411 2.1mm to 1.7mm DC jack adapter
US$4.38

We're carrying this adapter primarily to allow Chumby Hacker Board users to adapt our nice 5V @ 2A power supply to their CHB. But you can use this adapter for anything else that has a 1.7mm DC jack, such as a PSP.

In stock
+ −
Add to wish list
895 Wire Light LED Strand - 12 Blue LEDs + Coin Cell Holder
895 Wire Light LED Strand - 12 Blue LEDs + Coin Cell Holder
US$8.67
Each strand comes with 12 LEDs, approximately 5cm/2 inches apart for a 2 foot long strand of wire. At one end of the magnet wire, a double stranded-core wire is soldered on and heat-shrinked to protect it.
In stock
+ −
Add to wish list
159 Diffused RGB (tri-color) LED - Common Anode
159 Diffused RGB (tri-color) LED - Common Anode
US$3.28
Diffused 5mm tri-color LED with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle.
In stock
+ −
Add to wish list
978 Panel mount HDMI Cable - 40 cm
978 Panel mount HDMI Cable - 40 cm
US$10.42
This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two M3 screws are used to attach the female socket end, 1"/25.4mm apart. Two hex-screws are included and the hex nuts are embedded inside the molded end. 
In stock
+ −
Add to wish list
575 Panel Volt Meter - 4.5V to 30VDC
575 Panel Volt Meter - 4.5V to 30VDC
US$13.92
Dimensions: 48x29x21mm. Panel cutout: 45.5mm x 26.5mm. Digit size: 14mm/0.56" high, green LEDs. Refresh rate: about 2 Hz. Power specifications: 4.5V to 30V DC measurements. 0.1V precision. 3-4mA draw. Green LED display. Reverse polarity protected.
In stock
+ −
Add to wish list
261 JST 2-pin cable
261 JST 2-pin cable
US$1.67
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger!
In stock
+ −
Add to wish list
12 - 26
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
28 - 42