Our Brands

Adafruit

17 - 31
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
33 - 47
Newest Items First
15 Per Page
423-ADA Foot switch
423-ADA Foot switch
US$13.13
This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and contains a snap switch. You can use the switch as either a "normally open" or "normally closed" type. Attached to the switch is a 2 meter long cable so you can wire it directly to your project.
In stock
+ −
Add to wish list
1064-ADA Electret Microphone - 20Hz-20KHz Omidirectional
1064-ADA Electret Microphone - 20Hz-20KHz Omidirectional
US$2.63
This electret capsule microphone is the same one we use in our great microphone amplifier board. It contains a small vibrating element that will output a few milllivolts peak-to-peak.
In stock
+ −
Add to wish list
627-ADA Electroluminescent (EL) Panel Starter Pack - 10cm x 10cm Aqua
627-ADA Electroluminescent (EL) Panel Starter Pack - 10cm x 10cm Aqua
US$43.67

Includes: 10cm x 10cm (approx 4"x4") square panel in Aqua, Portable 4xAAA inverter powerful enough to drive a single panel, 4 x AAA alkaline batteries to power the inverter and panel for 10 hours.

In stock
+ −
Add to wish list
905-ADA Large Plastic Project Enclosure - Weatherproof with Clear Top
905-ADA Large Plastic Project Enclosure - Weatherproof with Clear Top
US$34.92
We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the easy-open screws that can be taken apart as many times as you wish without worrying about cracking or stripping.
In stock
+ −
Add to wish list
903-ADA Small Plastic Project Enclosure - Weatherproof with Clear Top
903-ADA Small Plastic Project Enclosure - Weatherproof with Clear Top
US$17.42
We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the easy-open screws that can be taken apart as many times as you wish without worrying about cracking or stripping. 
In stock
+ −
Add to wish list
1008-ADA Small Alligator Clip Test Lead (set of 12)
1008-ADA Small Alligator Clip Test Lead (set of 12)
US$6.92
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy!
In stock
+ −
Add to wish list
936-ADA Panel Mount USB Cable - B Female to Mini-B Male
936-ADA Panel Mount USB Cable - B Female to Mini-B Male
US$6.92
This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, USB Boarduino, etc into a box! 
Delivery within 2-3 weeks
+ −
Add to wish list
874-ADA Snap-action 5-Wire Block Connector (12-28 AWG) - Pack of 3
874-ADA Snap-action 5-Wire Block Connector (12-28 AWG) - Pack of 3
US$8.67
Each block connector has a metal block inside and five levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! They're super handy for free wiring and can handle up to 20A at 300V with UL listing so you can also use them for mains wiring. Use any wires from 12 AWG down to 28 AWG. 
In stock
+ −
Add to wish list
978 Panel mount HDMI Cable - 40 cm
978 Panel mount HDMI Cable - 40 cm
US$10.42
This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two M3 screws are used to attach the female socket end, 1"/25.4mm apart. Two hex-screws are included and the hex nuts are embedded inside the molded end. 
In stock
+ −
Add to wish list
972-ADA Servo Extension Cable - 30cm / 12" long
972-ADA Servo Extension Cable - 30cm / 12" long
US$3.42
Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 30cm later, a 3 pin female connection. It even keeps the common red/black/white color coding.
In stock
+ −
Add to wish list
737-ADA Power Distribution Bus - 7 x 6mm diameter solid brass
737-ADA Power Distribution Bus - 7 x 6mm diameter solid brass
US$3.42
These machined bus bars are for when you want to distribute power through a project, we think they are ideal for robots and LED pixel grids where you have tons of current and a lot of loose wiring to control.
In stock
+ −
Add to wish list
761-ADA Cable Gland PG-9 size - 0.158" to 0.252" Cable Diameter - PG-9
761-ADA Cable Gland PG-9 size - 0.158" to 0.252" Cable Diameter - PG-9
US$3.42
By installing these over the cable, they form-fit to make a seal, keeping your project box innards safe from the outdoors. 
In stock
+ −
Add to wish list
988-ADA USB A Jack to 5.5/2.1mm jack adapter
988-ADA USB A Jack to 5.5/2.1mm jack adapter
US$5.17
This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. 
In stock
+ −
Add to wish list
371-ADA 6-pin Socket/Socket IDC cable - 6"
371-ADA 6-pin Socket/Socket IDC cable - 6"
US$3.50
Connect this to that with an IDC cable! This cable has 6 pins (2x3) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side, they're quite sturdy!
In stock
+ −
Add to wish list
762-ADA Cable Gland PG-7 size - 0.118" to 0.169" Cable Diameter - PG-7
762-ADA Cable Gland PG-7 size - 0.118" to 0.169" Cable Diameter - PG-7
US$3.42
By installing these over the cable, they form-fit to make a seal, keeping your project box innards safe from the outdoors. 
In stock
+ −
Add to wish list
17 - 31
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
33 - 47