Our Brands

Adafruit

14 - 28
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
30 - 44
Newest Items First
15 Per Page
1451-ADA Diffused 'Piranha' Super-flux RGB LED (10 pack)
1451-ADA Diffused 'Piranha' Super-flux RGB LED (10 pack)
US$19.17
90 degree viewing angle. You can plug these into a breadboard diagonally. These are Common-Anode type which means you connect one pin to 5V or so and then tie the other three legs to ground through a resistor.
In stock
+ −
Add to wish list
1450-ADA Analog Feedback Micro Servo - Metal Gear
1450-ADA Analog Feedback Micro Servo - Metal Gear
US$26.17
Dimensions: 11.58mm / 0.45" x 22.75mm / 0.89" x 29.19mm / 1.14", Max Dimensions: 11.58mm / 0.45" x 32.74mm / 1.28" x 31.19mm / 1.22", Wire length: 131.67mm / 5.18",  Torque: 25 oz*in / 1.8 kg*cm @6V, Speed: 0.1 sec/60° @6V.
Delivery within 2-3 weeks
+ −
Add to wish list
1465-ADA 6-pin AVR ISP Breadboard Adapter Mini Kit
1465-ADA 6-pin AVR ISP Breadboard Adapter Mini Kit
US$2.02
A simple breakout, 2x3 in the center, two 1x3's on the side. Plugs into any breadboard for neat wiring (in both nifty and clean senses of the word). Comes with a quality mini PCB, a 2x3 pin header and a small stick of 0.1" header.
In stock
+ −
Add to wish list
492-ADA LED Illuminated Pushbutton - 30mm Round
492-ADA LED Illuminated Pushbutton - 30mm Round
US$7.61
A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. Its the same size as a 'standard' 30mm arcade but has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. 
In stock
+ −
Add to wish list
1463-ADA NeoPixel Ring - 16 x WS2812 5050 RGB LED with Integrated Drivers
1463-ADA NeoPixel Ring - 16 x WS2812 5050 RGB LED with Integrated Drivers
US$17.42
16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another.
In stock
+ −
Add to wish list
1438-ADA Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3
1438-ADA Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3
US$34.92
Instead of a L293D darlington driver, we now have the TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time). It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well. Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
In stock
+ −
Add to wish list
1187-ADA Massive Arcade Button with LED - 100mm White
1187-ADA Massive Arcade Button with LED - 100mm White
US$17.42
This button has a domed white plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly.
In stock
+ −
Add to wish list
1188-ADA Massive Arcade Button with LED - 100mm Green
1188-ADA Massive Arcade Button with LED - 100mm Green
US$17.42
This button has a domed green plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly.
In stock
+ −
Add to wish list
1189-ADA Massive Arcade Button with LED - 100mm Blue
1189-ADA Massive Arcade Button with LED - 100mm Blue
US$17.42
This button has a domed blue plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly.
Delivery within 2-3 weeks
+ −
Add to wish list
1186-ADA Massive Arcade Button with LED - 100mm Yellow
1186-ADA Massive Arcade Button with LED - 100mm Yellow
US$17.42
This button has a domed yellow plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly.
Delivery within 2-3 weeks
+ −
Add to wish list
1328-ADA 2.1mm DC Barrel Jack to Alligator Clips
1328-ADA 2.1mm DC Barrel Jack to Alligator Clips
US$3.42
A high quality molded 2.1mm DC barrel jack is brought out to red (center positive) & black (ring negative) alligator clips. Works with just about every wall adapter, good for about 2 or 3 Amps of current and up to 24VDC.
In stock
+ −
Add to wish list
1329-ADA 2.1mm DC Barrel Plug to Alligator Clips
1329-ADA 2.1mm DC Barrel Plug to Alligator Clips
US$3.42
A high quality molded 2.1mm DC barrel plug is brought out to red (center positive) & black (ring negative) alligator clips. 2.1mm is a near-standard for electronics, so with this adapter you can easy clip and connect packs and wires to a power jack. Good for about 2 or 3 Amps of current and up to 24VDC.
In stock
+ −
Add to wish list
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
US$8.67
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, four identical plugs to use!
Delivery within 2-3 weeks
+ −
Add to wish list
1351-ADA 2-Way 2.1mm DC Barrel Jack Splitter Squid
1351-ADA 2-Way 2.1mm DC Barrel Jack Splitter Squid
US$5.17
Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, two identical plugs to use!
In stock
+ −
Add to wish list
1448-ADA Compact Switching Power Supply - Selectable Output 3-12VDC
US$19.95
This model is 10 Watts and has 6 selectable outputs ranging from 3V to 12VDC and up to 1.5A output. It has a 2-prong plug, but takes 110VAC to 240VAC so you can use it anywhere with a simple plug adapter. 
In stock
+ −
Add to wish list
14 - 28
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
30 - 44