Our Brands

Adafruit

1 2 3 4 5 6 7 8 9 10 11 12 13 14
8 - 22
Newest Items First
32 Per Page
3124-ADA DE-15 (DB-15) Female Socket to Terminal Block Breakout
US$7.88
Make your own custom DE-15 cable or DE-15 interface with ease, using this DE-15 Socket to Terminal Block Breakout. You get a nice solid PCB with an DE-15 socket and two strips of terminal blocks that you can use with stranded or solid core wire to quickly assemble your own wiring jigs.
In stock
+ −
Add to wish list
3176-ADA Adafruit Feather M0 RFM69 Packet Radio - 868 or 915 MHz
US$35.42
This is our take on an microcontroller with a RFM69HCW packet radio transceiver plus built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! We have other boards in the Feather family, check'em out. This is the 900 MHz radio version, which can be used for either 868MHz or 915MHz transmission/reception - the exact radio frequency is determined when you load the software since it can be tuned around dynamically.
In stock
+ −
Add to wish list
3006-ADA Adafruit I2S 3W Class D Amplifier Breakout - MAX98357A
US$9.45
We now have an all in one digital audio amp breakout board that works incredibly well with the Raspberry Pi! If you're looking for an easy and low cost way to get you digital sound files bumpin' then the MAX08357 I2S Amp Breakout is for you. It takes standard I2S digital audio input and, not only decodes it into analog, but also amplifies it directly into a speaker. Perfect for adding compact amplified sound, it takes 2 breakouts (I2S DAC + Amp) and combines them into one.
In stock
+ −
Add to wish list
3071-ADA Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz
US$15.95
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers.
In stock
+ −
Add to wish list
2923-ADA Adafruit Latching Mini Relay FeatherWing
US$13.92
This is the Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board.
In stock
+ −
Add to wish list
2946-ADA Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
US$10.42
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! This I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid so you can have beautiful LED lighting effects, without a lot of pin twiddling. Simply tell the chip which LED on the grid you want lit, and what brightness and it's all taken care of for you.
In stock
+ −
Add to wish list
2926-ADA Terminal Block Breakout FeatherWing Kit for all Feather Boards
US$26.17
The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded the PCB out to 2" x 2.5" with 3.5mm pitch terminal blocks down each side. There's also four mounting holes so you can attach the breakout to your enclosure or project.
In stock
+ −
Add to wish list
2880-ADA 2-pin JST SM Plug + Receptacle Cable Set
US$1.32
These 2-wire cables are 16cm long and come as a set.  One side has a 2-pin JST SM type connector plug on the end.  The other side has a matching 2-pin JST SM type receptacle connector.  They are good for whenever you have 2 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
1096-ADA Simple RF M4 Receiver - 315MHz Momentary Type
US$7.62
These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with 5-10VDC and press the buttons on our matching RF keyfob remote. When the A button is pressed, it activates the first pin, when the B button is pressed, it activates the second one, and so forth for all four buttons. There's no microcontroller required, its just a simple one-to-one link.
In stock
+ −
Add to wish list
1095-ADA Keyfob 4-Button RF Remote Control - 315MHz
US$12.17
This 4-button keyfob remote goes with our three basic 315MHz RF receiver modules. It will work with all of them, sending out one of four commands that match up with the four outputs. Its small and light weight and will work up to 25 feet away depending on line-of-sight and obstructions. Since this is just a transmitter, if you have multiple receivers, it will turn all of them on and off at the same time (there is no sub-addressing).
In stock
+ −
Add to wish list
2910-ADA Tiny OTG Adapter - USB Micro to USB
US$5.17
This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks.  At just ~15.5mm long, ~11.3mm wide, and ~2mm, this really is the tiniest little adapter we've probably ever seen.
Delivery within 2-3 weeks
+ −
Add to wish list
2991-ADA USB Mini Hub with Power Switch - OTG Micro-USB
US$7.73
This mini USB hub has four USB 2.0 ports each with a max total transmission speed up to 480 MBps. All four ports are powered thru the USB micro-B cable. There's also a single on-off switch that controls the four USB ports.
In stock
+ −
Add to wish list
2998-ADA USB Mini Hub with Power Switch
US$8.67
This mini USB hub has four USB 2.0 ports each with a max total transmission speed up to 480 MBps. All four ports are powered thru the USB micro-B cable. There's also a single on-off switch that controls the four USB ports. There is a port for an external power supply but its connected directly to the 5V line so if you need to externally power, we recommend prying open the case and cutting the red 5V line from the USB connection.
In stock
+ −
Add to wish list
2863-ADA NeoPixel Ring - 24 x 5050 RGBW LEDs w/ Integrated Drivers - Cool White - ~6000K
US$34.92
24 ultra bright smart LED NeoPixels are arranged in a circle with 2.58" (65.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim.
Delivery within 2-3 weeks
+ −
Add to wish list
2853-ADA NeoPixel Ring - 12 x 5050 RGBW LEDs w/ Integrated Drivers - Cool White - ~6000K
US$16.63
12 ultra bright smart LED NeoPixels are arranged in a circle with 1.45" (37mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim.
In stock
+ −
Add to wish list
2859-ADA NeoPixel Jewel - 7 x 5050 RGBW LED w/ Integrated Drivers - Natural White - ~4500K
US$12.17
The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + white dots to your project!
Delivery within 2-3 weeks
+ −
Add to wish list
3013-ADA Adafruit DS3231 Precision RTC Breakout
US$24.42
This is the finest RTC you can get, and now we have it in a compact, breadboard-friendly breakout. With a coin cell plugged into the back, you can get years of precision timekeeping, even when main power is lost. Great for datalogging and clocks, or anything where you need to really know the time. Comes as a fully assembled and tested breakout plus a small piece of header. You can solder header in to plug it into a breadboard, or solder wires directly.
Delivery within 2-3 weeks
+ −
Add to wish list
2881-ADA A/V and RCA (Composite Video, Audio) Cable for Raspberry Pi
US$8.67
This A/V RCA Cable for Raspberry Pi is a great way to turn your Pi 2, A+ or B+'s output into a full on composite video and audio device.  Simply connect the cable to your Raspberry Pi's 3.5mm jack and the other side into whatever device you're looking to connect to and get full RCA visuals and sound.
In stock
+ −
Add to wish list
2909-ADA USB 2.0 and Ethernet Hub - 3 USB Ports and 1 Ethernet
US$24.52
This handy combo-hub has 3 USB 2.0 ports, and a AX88772A Ethernet transceiver. This chipset is really common and can be used by any Linux, Mac or Windows computer. It's particularly handy for the  Raspberry Pi A+ or brand new Raspberry Pi Zero which is tight on USB ports and has no Ethernet out. We did some basic tests and got 11+ MB/s transfer speeds on our Pi Zero.
In stock
+ −
Add to wish list
2940-ADA Short Feather Headers Kit - 12-pin and 16-pin Female Header Set
US$2.63
These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather project takes up, but still maintain that flexible configuration. "Normal" socket headers have an 8.5mm body height so this saves you a whole 3.5mm (hey it adds up!).
In stock
+ −
Add to wish list
2793-ADA RCA (Composite Video, Audio) Female Jack Terminal Block
US$4.38
One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs.
In stock
+ −
Add to wish list
2792-ADA RCA (Composite Video, Audio) Male Plug Terminal Block
US$2.63
One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs.
Delivery within 2-3 weeks
+ −
Add to wish list
2911-ADA 1/4" (6.35mm) Stereo Plug Terminal Block
US$3.42
This is the 1/4" (6.35mm) Stereo Plug Terminal Block. It's a pretty common size and is super useful for more heavy duty connections - like a modular synth, amplifier or an electric guitar.
Delivery within 2-3 weeks
+ −
Add to wish list
2890-ADA FeatherWing Doubler - Prototyping Add-on For All Feather Boards
US$13.13
This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto (2884-ADA) except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards simultaneously side-by-side!
In stock
+ −
Add to wish list
2900-ADA FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
US$26.17
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!
Delivery within 2-3 weeks
+ −
Add to wish list
2884-ADA FeatherWing Proto - Prototyping Add-on For All Feather Boards
US$7.62
This is the FeatherWing Proto - a prototyping add-on for all Feather boards. Using our Feather Stacking Headers or Feather Female Headersyou can connect a FeatherWing on top or bottom of your Feather board and let the board take flight!
Delivery within 2-3 weeks
+ −
Add to wish list
2829-ADA Adafruit Feather 32u4 Bluefruit LE
US$42.00
Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock!
In stock
+ −
Add to wish list
2830-ADA Feather Stacking Headers - 12-pin and 16-pin female headers
US$2.18
What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well.
In stock
+ −
Add to wish list
2821-ADA Adafruit Feather HUZZAH with ESP8266 WiFi
US$27.92
At the Feather HUZZAH's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can progam the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core.
In stock
+ −
Add to wish list
2748-ADA Adafruit ALS-PT19 Analog Light Sensor Breakout
US$3.85
Add a teeny analog light sensor, the ALS PT19 analog light sensor is a great way to upgrade a project that uses a photocell and needs RoHS compliance. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes.
Delivery within 2-3 weeks
+ −
Add to wish list
2788-ADA 3.5 / 1.3mm To 5.5 / 2.1mm DC Jack Adapter Cable
US$1.67
2.1mm inner diameter (5.5mm outer diameter) is the most common type of DC plug, but you can use this adapter for anything else that has a 1.3mm ID (3.5mm OD) DC jack!
In stock
+ −
Add to wish list
2750-ADA Lithium Ion Polymer Battery - 3.7v 350mAh
US$12.17
The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14
8 - 22