Our Brands

Adafruit

1 2 3 4 5 6 7 8 9 10
4 - 18
Newest Items First
32 Per Page
USB Type C Socket - SMT Inline Breakout Board
US$5.49
This USB Type C breakout is kinda interesting, it looks similar to our right angle USB C socket breakout, but it's an 'inline' style with pads for soldering to the connections. We think it could be handy for making custom cable harnesses!
In stock
+ −
Add to wish list
Adafruit Triple-axis Magnetometer - LIS3MDL - STEMMA QT / Qwiic
US$15.42
Sense the magnetic fields that surround us with this handy triple-axis magnetometer (compass) module. Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. This sensor tends to be paired with a 6-DoF (degree of freedom) accelerometer/gyroscope to create a 9-DoF inertial measurement unit that can detect its orientation in real-space thanks to Earth's stable magnetic field.
In stock
+ −
Add to wish list
Adafruit LSM6DSOX 6 DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
US$18.45
This IMU sensor has 6 degrees of freedom - 3 degrees each of linear acceleration and angular velocity at varying rates within a respectable range. For the accelerometer: ±2/±4/±8/±16 g at 1.6 Hz to 6.7KHz update rate. For the gyroscope: ±125/±250/±500/±1000/±2000 dps at 12.5 Hz to 6.7 KHz.
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
US$9.99
What can the MCP2221 chip do?  This chip from Microchip is similar to a USB to serial converter chips but adds a GPIO and I2C interface as well. The analog/digital GPIO pins can act as 10-bit analog inputs (ADC) and there's even a 5-bit DAC output. The I2C interface is great for talking to OLEDs, sensors, PWM drivers, its the most popular interface for small devices.
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit Mini PiTFT 1.3" - 240x240 TFT Add-on for Raspberry Pi
US$22.95
This product is your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240x240 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case.
In stock
+ −
Add to wish list
Adafruit e-Ink Feather Friend with 32KB SRAM
US$13.79
We've liked these displays for a long time, and we've got Arduino/CircuitPython drivers for all of our Feathers, so wouldn't an e-paper Feather Friend make a ton of sense? Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This Friend will add all the power supply support circuitry and level shifting so you can attach your favorite display (up to tri-color 4.2") and wire it up to your favorite development board.
In stock
+ −
Add to wish list
Mono Enclosed Speaker - 3W 4 Ohm
US$5.99
Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is ~2.0mm spacing).
In stock
+ −
Add to wish list
Mono Enclosed Speaker with Plain Wires - 3W 4 Ohm
US$5.99
This single  2.8" x 1.2" speaker is the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like these speakers as they are small and enclosed for good audio volume and quality. This speaker does not come with a connector on the end, it's just plain bare wires!
In stock
+ −
Add to wish list
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
US$13.92
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboard LEDs when the matching touch sensor fires to help you debug your sensor setup.
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT
US$17.52
Sometimes you need to sense pressure in a damp or caustic environment. And sometimes you need to know the relative changes in pressure as well as the absolute pressure. For the times you need to do both (or either), the LPS33HW is the pressure sensor for you. Combining protection from water intrusion with support for high precision relative and absolute measurements, this sensor will do what you need.
In stock
+ −
Add to wish list
Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
US$56.95
Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module.
In stock
+ −
Add to wish list
Monochrome 0.91" 128x32 I2C OLED Display - STEMMA QT / Qwiic Compatible
US$19.95
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!
Delivery within 2-3 weeks
+ −
Add to wish list
JST PH 3-pin Horizontal Connector (10-pack) - STEMMA
US$5.49
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the horizontal style.
In stock
+ −
Add to wish list
JST PH 3-pin Vertical Connector (10-pack) - STEMMA
US$5.49
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the vertical style.
In stock
+ −
Add to wish list
JST PH 4-pin Horizontal Connector (10-pack) - STEMMA
US$5.49
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style.
In stock
+ −
Add to wish list
JST PH 4-pin Vertical Connector (10-pack) - STEMMA
US$5.49
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the vertical style.
In stock
+ −
Add to wish list
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
US$1.79
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In stock
+ −
Add to wish list
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
US$1.79
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In stock
+ −
Add to wish list
JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic
US$4.99
This cable will make it super easy to use our plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector (technically known as a JST SH 4-pin plug) into 4 individual wires with grippy alligator clips. We're carrying these to match up with our boards or breakouts with 'STEMMA QT' connectors on them.
In stock
+ −
Add to wish list
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
US$2.49
This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them.
In stock
+ −
Add to wish list
3-pin JST SM Plug + Receptacle Cable Set
US$2.49
These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 3 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable - 150mm Long
US$1.89
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In stock
+ −
Add to wish list
Adafruit Mini GPS PA1010D - UART and I2C - STEMMA QT
US$30.44
This miniature GPS breakout is only 1" x 1" (~ 25mm x 25mm) but houses a complete GPS/GNSS solution with both I2C and UART interfaces. There's even an antenna on top so it's plug and play!
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic
US$13.79
Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient your project!
In stock
+ −
Add to wish list
Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic
US$20.30
Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a gyroscoe that can sense how fast the board is being twisted around. By combining this data you can tell how your project is moving through space
In stock
+ −
Add to wish list
JST PH 4-Pin Socket to Color Coded Cable - 200mm
US$1.49
This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded!
In stock
+ −
Add to wish list
FTDI Serial TTL-232 USB Type C Cable - 5V Power and Logic
US$30.95
This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels. Useful whenever you want to communicate with a TTL serial device and the pinout will match up exactly to any 'FTDI' 6-pin header.
In stock
+ −
Add to wish list
Adafruit 1.14" 240x135 Color TFT Display + MicroSD Card Breakout - ST7789
US$21.61
This lovely little display breakout is the best way to add a small, colorful and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.14" display has 240x135 16-bit full color pixels and is an IPS display, so the color looks great up to 80 degrees off axis in any direction.
In stock
+ −
Add to wish list
5-pin JST SM Plug + Receptacle Cable Set
US$2.39
These 5-wire cables are 168mm (6.6") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 5 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
6-pin JST SM Plug + Receptacle Cable Set
US$2.39
These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 6 wires you want to be able to plug and unplug.
In stock
+ −
Add to wish list
JST PH 2-Pin Cable – Male Header 200mm
US$1.29
Plugs in nicely with our Li-Poly batteries, it even has the right color coding!
In stock
+ −
Add to wish list
JST PH 3-Pin Socket to Color Coded Cable - 200mm
US$1.49
This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded!
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10
4 - 18