Our Brands

Adafruit

4 - 18
12 13 14 15 16 17 18 19 20 21 22
Newest Items First
32 Per Page
1230 SMT Breakout PCB Set For SOT-23, SOT-89, SOT-223 and TO252
1230 SMT Breakout PCB Set For SOT-23, SOT-89, SOT-223 and TO252
US$8.67
This set comes with 3 different boards which fit 5 different packages and comes with five SOT-23 (fits 2 x SOT-23 on the back, and a single SOT-23-5 or SOT-23-6 on the front), four SOT-89 or SOT-223, and four TO-252.
Delivery within 2-3 weeks
+ −
Add to wish list
659 FLORA - Wearable electronic platform: Arduino-compatible
659-ADA FLORA - Wearable electronic platform: Arduino-compatible - v3
US$23.02
The FLORA is small (1.75" diameter, weighing 4.4 grams). The FLORA family also has the best stainless steel threads, sensors, GPS modules and chainable LED NeoPixels, perfect accessories for the FLORA main board. The FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable, no additional purchases are needed!
In stock
+ −
Add to wish list
572 Adafruit Proto Cape Kit for Beagle Bone
572 Adafruit Proto Cape Kit for Beagle Bone
US$17.42
This PCB fits neatly on top of a Beagle Bone, without getting in the way of the Ethernet jack, and provides a breakout to both 46 pin headers - with individual numbering to keep them straight.
In stock
+ −
Add to wish list
67 9V battery holder with switch & 5.5mm/2.1mm plug
67-ADA 9-Volt battery holder and (-volt battery clip with switch & 5.5mm/2.1mm plug
US$6.92
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm barrel plug. Use this to battery-power your Arduino (or other electronic projects) - it's ready to go out of the box!
In stock
+ −
Add to wish list
80 Battery Clip 9V with 5.5mm/2.1mm plug
80-ADA Battery Clip 9V with 5.5mm/2.1mm plug
US$5.25
These are high quality battery clips. They're molded plastic so they wont tear like cheap clips, and they cover the battery terminals to prevent shorts.
In stock
+ −
Add to wish list
62 USB Cable - Standard A-B - 3 ft/1m
62 USB Cable - Standard A-B - 3 ft/1m
US$7.00
This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP, or USB Boarduino (among other things).
In stock
+ −
Add to wish list
1090 FLORA GPS Starter Pack
1090 FLORA GPS Starter Pack
US$138.53
Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the Flora, and some parts to make a wearable remote control (or TV-B-Gone!): NPN transistors, long range IR LEDs, and matching resistors.
In stock
+ −
Add to wish list
258-ADA Lithium Ion Polymer Battery - 3.7v 1200mAh
258-ADA 3.7v 1200mAh Lithium Ion Polymer Battery
US$19.17
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ model (328-ADA). The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.
In stock
+ −
Add to wish list
641 Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
641 Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
US$10.71
This thread is 3 ply, thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles. This may be sew-able by a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable/e-textile project.
In stock
+ −
Add to wish list
640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
US$10.86
This thread is 2 ply, a little thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles or with a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable/e-textile project.
In stock
+ −
Add to wish list
1126 Sewable Snaps - 5mm Diameter - Card of 24
1126 Sewable Snaps - 5mm Diameter - Card of 24
US$6.09
The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads! Snaps make a great connector for wearables-- solder one side to the board and sew the other to your project with conductive thread! This card comes with 24 complete snaps (socket and stud pairs).
In stock
+ −
Add to wish list
727 Battery Holder 3 x AAA with On/Off Switch and 2-Pin JST
727 Battery Holder 3 x AAA with On/Off Switch and 2-Pin JST
US$3.42
Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of life with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5V
In stock
+ −
Add to wish list
1170 Magnetic Pin Back
1170 Magnetic Pin Back
US$3.01
These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets. Affix the metal bar to your FLORA projects-- it's just the right size! Then attach your FLORA project to any garment without poking holes in your clothes.
Delivery within 2-3 weeks
+ −
Add to wish list
615 Needle set - 3/9 sizes - 20 needles
615 Needle set - 3/9 sizes - 20 needles
US$3.01
2 x #3 needles (0.04" x 1.75") (1mm x 45mm). 6 x #5 needles (0.0375" x 1.65") (0.95mm x 42mm). 8 x #7 needles (0.035" x 1.55") (0.9mm x 39mm). 4 x #9 needles (0.027" x 1.35") (0.7mm x 35mm).
In stock
+ −
Add to wish list
328 Lithium Ion Polymer Battery - 3.7v 2600mAh
328-ADA 3.7v 2500mAh Lithium Ion Polymer Battery
US$27.92
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model (258-ADA).
In stock
+ −
Add to wish list
261 JST 2-pin cable
261 JST 2-pin cable
US$1.67
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger!
In stock
+ −
Add to wish list
1085 ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
1085 ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
US$22.74
This provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels.
In stock
+ −
Add to wish list
1109 Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi
US$43.67
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks.
In stock
+ −
Add to wish list
802 Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
802 Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
US$53.68
This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob)!
In stock
+ −
Add to wish list
85-ADA Shield Stacking Headers for Arduino (R3 Compatible)
85-ADA Shield Stacking Headers for Arduino (R3 Compatible)
US$3.42
These are standard 6-pin, 8-pin and 10-pin 0.1" spacing female headers...with a twist! The pins are extra long which means you can use these to stack shields!
In stock
+ −
Add to wish list
828 Liquid Flow Meter - Plastic 1/2" NPT Threaded
828 Liquid Flow Meter - Plastic 1/2" NPT Threaded
US$17.42
Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter.
In stock
+ −
Add to wish list
996 Brass Liquid Solenoid Valve - 12V - 1/2 NPT
996 Brass Liquid Solenoid Valve - 12V - 1/2 NPT
US$38.50
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPT) outlets.
In stock
+ −
Add to wish list
1214-ADA Adafruit Perma-Proto Small Mint Tin Size Breadboard PCB - 3 pack
1214-ADA Adafruit Perma-Proto Small Mint Tin Size Breadboard PCB - 3 pack
US$13.92

15 rows of double 5-hole rows + 48 individual holes. 2 power rails with positive/negative markings. 2.1" x 1.3" (54mm x 33mm), 0.063" thick FR4. 1.2mm / 0.047" drill holes. 4 x 0.125"/3mm drill mounting holes spaced on a 45.5mm x 25.4mm / 1.8" x 1" rectangle. 

In stock
+ −
Add to wish list
1212-ADA SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
1212-ADA SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
US$8.67
This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC. Solder your chip to either side and you're ready to rock on any solderless breadboard. 
In stock
+ −
Add to wish list
1211-ADA SMT Breakout PCB for SOIC-12 or TSSOP-12 - 6 Pack!
1211-ADA SMT Breakout PCB for SOIC-12 or TSSOP-12 - 6 Pack!
US$8.67
This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 12-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 12-SOIC. Solder your chip to either side and you're ready to rock on any solderless breadboard.
In stock
+ −
Add to wish list
1210-ADA SMT Breakout PCB for SOIC-14 or TSSOP-14 - 6 Pack!
1210-ADA SMT Breakout PCB for SOIC-14 or TSSOP-14 - 6 Pack!
US$8.67
This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 14-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 14-SOIC. Solder your chip to either side and you're ready to rock on any solderless breadboard.
In stock
+ −
Add to wish list
1208-ADA SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
1208-ADA SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
US$8.67
This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Solder your chip to either side and you're ready to rock on any solderless breadboard.
Delivery within 2-3 weeks
+ −
Add to wish list
1207-ADA SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
1207-ADA SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
US$6.92
This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Solder your chip to either side and you're ready to rock on any solderless breadboard. 
Delivery within 2-3 weeks
+ −
Add to wish list
1163 SMT Breakout PCB for 32-QFN or 32-TQFP - 3 Pack!
1163 SMT Breakout PCB for 32-QFN or 32-TQFP - 3 Pack!
US$10.42
This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 32-QFP pin out with traces going to two rows of 0.1" spaced holes, the other has 32-QFN. Solder your chip to either side and you're ready to rock on any solderless breadboard. 
In stock
+ −
Add to wish list
578 4-pin JST SM Plug + Receptacle Cable Set
578 4-pin JST SM Plug + Receptacle Cable Set
US$2.63
These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector.
In stock
+ −
Add to wish list
1131 JST-PH Battery Extension Cable - 500mm
1131 JST-PH Battery Extension Cable - 500mm
US$3.42
By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire.
In stock
+ −
Add to wish list
364-ADA PN532 NFC/RFID controller breakout board - v1.6
364-ADA PN532 NFC/RFID controller breakout board - v1.6
US$59.95
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
In stock
+ −
Add to wish list
4 - 18
12 13 14 15 16 17 18 19 20 21 22