Our Brands

Adafruit

1 - 11
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
13 - 22
Newest Items First
32 Per Page
1609-ADA Adafruit Perma-Proto Half-sized Breadboard PCB - Single
1609-ADA Adafruit Perma-Proto Half-sized Breadboard PCB - Single
US$7.23
This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a half-sized breadboard and turned that into a beautiful PCB. The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy.
In stock
+ −
Add to wish list
1606-ADA Adafruit Perma-Proto Full-sized Breadboard PCB - Single
1606-ADA Adafruit Perma-Proto Full-sized Breadboard PCB - Single
US$12.17
This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a full-sized breadboard (the PCB has 60 rows instead of 63 rows) and turned that into a beautiful PCB.
In stock
+ −
Add to wish list
390-ADA USB / DC / Solar Lithium Ion/Polymer charger - v2
390-ADA USB / DC / Solar Lithium Ion/Polymer charger - v2
US$26.95
NOTE: This product is only designed for use with solar panels sold at the Adafruit store. We cannot guarantee this will work with solar panels purchased elsewhere. This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. 
In stock
+ −
Add to wish list
1661-ADA uFL SMT Antenna Connector
1661-ADA uFL SMT Antenna Connector
US$2.41
uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great!
In stock
+ −
Add to wish list
1645-ADA Flex Cable for Raspberry Pi Camera - 50mm / 2"
1645-ADA Flex Cable for Raspberry Pi Camera - 50mm / 2"
US$3.42
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size.
In stock
+ −
Add to wish list
1648-ADA Flex Cable for Raspberry Pi Camera - 300mm / 12"
1648-ADA Flex Cable for Raspberry Pi Camera - 300mm / 12"
US$3.00
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size.
In stock
+ −
Add to wish list
1647-ADA Flex Cable for Raspberry Pi Camera - 200mm / 8"
1647-ADA Flex Cable for Raspberry Pi Camera - 200mm / 8"
US$3.42
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. 
Delivery within 2-3 weeks
+ −
Add to wish list
1643-ADA NeoPixel Ring - 12 x WS2812 5050 RGB LED with Integrated Drivers
1643-ADA NeoPixel Ring - 12 x WS2812 5050 RGB LED with Integrated Drivers
US$13.13
12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another.
In stock
+ −
Add to wish list
2.8" TFT Touch Shield for Arduino with Resistive Touch Screen
US$48.91
This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
Delivery within 2-3 weeks
+ −
Add to wish list
1656-ADA 3M Z-Axis Conductive Tape 9703 - 2"x6" (50mm x 150mm) Strip
1656-ADA 3M Z-Axis Conductive Tape 9703 - 2"x6" (50mm x 150mm) Strip
US$8.67
Z-axis tape is made by 3M, and is used to bond two conductive surfaces together and allow a small (we'd say keep it under 100mA) current to flow through the tape. But here's the cool part: its only conductive across the thickness of the tape itself, not along the length or width.
In stock
+ −
Add to wish list
306-ADA Digital RGB LED Weatherproof Strip 32 LED - (1m)
306-ADA Digital RGB LED Weatherproof Strip 32 LED - (1m)
US$52.42
There are 32 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 7-bit PWM precision (so 21-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip.
In stock
+ −
Add to wish list
1270-ADA Adafruit 1.2" 4-Digit 7-Segment Display w/I2C Backpack - Red
1270-ADA Adafruit 1.2" 4-Digit 7-Segment Display w/I2C Backpack - Red
US$26.95

The product kit comes with: A fully tested and assembled LED backpack. Ultra-bright 4-digit 1.2" tall red seven-segment display. 5-pin header. A bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes. 

Delivery within 2-3 weeks
+ −
Add to wish list
1399-ADA RGB 7-Segment Digit - 1" Tall Digit
1399-ADA RGB 7-Segment Digit - 1" Tall Digit
US$27.92
Inside each segment is 3 red/green/blue LEDs, for 21 LEDs total. The anodes are all connected together and then there are 21 cathodes to control. 
In stock
+ −
Add to wish list
1641-ADA 1N4148 Signal Diode - 10 pack
1641-ADA 1N4148 Signal Diode - 10 pack
US$2.63
You have some electrons over here, and you want them over there but you don't want the electrons from over there to be able to come over here? That's what a diode is for, these are directional current valves and have the benefit of being waaay smaller than vacuum tubes. 
In stock
+ −
Add to wish list
1580-ADA Resistive Touch Screen to USB Mouse Controller - AR1100
1580-ADA Resistive Touch Screen to USB Mouse Controller - AR1100
US$15.45
Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital conversion. Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate.
In stock
+ −
Add to wish list
1578-ADA Lithium Ion Polymer Battery - 3.7v 500mAh
1578-ADA 3.7v 500mAh Lithium Ion Polymer Battery
US$13.92
Lithium ion polymer batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries.
In stock
+ −
Add to wish list
1612-ADA NeoPixel Mini PCB - Pack of 5
1612-ADA NeoPixel Mini PCB - Pack of 5
US$8.67
These little PCBs are only 8mm x 10mm and have two sets of three pads on the back for soldering wires.
In stock
+ −
Add to wish list
1621-ADA White LED Backlight Module - Large 45mm x 86mm
1621-ADA White LED Backlight Module - Large 45mm x 86mm
US$5.17
Each LED is encased in a 3.5mm thick strip of a acrylic.
Delivery within 2-3 weeks
+ −
Add to wish list
1616-ADA Adafruit Trellis Monochrome Driver PCB for 4x4 Keypad & 3mm LEDs
1616-ADA Adafruit Trellis Monochrome Driver PCB for 4x4 Keypad & 3mm LEDs
US$17.42
This item is just for the Trellis driver PCB assembly: LEDs and buttons not included. Trellis is an open source backlight keypad driver system. It is easy to use, works with any 3mm LEDs and eight tiles can be tiled together on a shared I2C bus.
In stock
+ −
Add to wish list
1611-ADA Silicone Elastomer 4x4 Button Keypad - for 3mm LEDs
1611-ADA Silicone Elastomer 4x4 Button Keypad - for 3mm LEDs
US$8.67
Each button is 10mm x 10mm square and 10mm tall. There is 5mm of grid spacing between the buttons. You can 'tile' the button pads edge-to-edge and they'll grid up correctly. You can also cut the pads down if you like, the silicone is very soft.
In stock
+ −
Add to wish list
1592-ADA Short Wire Alligator Clip Test Lead (set of 12)
1592-ADA Short Wire Alligator Clip Test Lead (set of 12)
US$7.62
Connect this to that without soldering using these handy mini alligator clip test leads. 5" overall cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place.
In stock
+ −
Add to wish list
1559-ADA Flora RGB Smart Neo Pixel version 2 - Sheet of 20
1559-ADA Flora RGB Smart Neo Pixel version 2 - Sheet of 20
US$49.95
Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin/wire to control as many LEDs as you like. They're easy to sew, and the chainable design means no crossed threads.
In stock
+ −
Add to wish list
1558-ADA Breadboard-friendly RGB Smart NeoPixel - Sheet of 25
1558-ADA Breadboard-friendly RGB Smart NeoPixel - Sheet of 25
US$69.92
This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on each side for easy soldering, chaining and breadboarding. These ultra-bright LEDs have a constant-current driver cooked right into the LED package!
In stock
+ −
Add to wish list
1471-ADA Large Tin With Clear Top Window
1471-ADA Large Tin With Clear Top Window
US$8.67
This tin is about 3.5" by 5.5" so it's got plenty of space for an Arduino Uno or Mega, or Raspberry Pi, or Beagle Bone, or really any dev board you could think of. The tin is sturdy but easy to punch holes in or cut with tin snips.
In stock
+ −
Add to wish list
1489-ADA Tactile Switch Buttons (6mm slim) x 20 pack
1489-ADA Tactile Switch Buttons (6mm slim) x 20 pack
US$8.67
These are half the width of classic 6mm tactile switches so they line up better on a breadboard, just plug them into every-other row. These work best in a PCB but can be used on a solderless breadboard. The two pins are normally open (disconnected) and when the button is pressed they are momentarily closed.
In stock
+ −
Add to wish list
1490-ADA Tactile Switch Buttons (6mm tall) x 10 pack
1490-ADA Tactile Switch Buttons (6mm tall) x 10 pack
US$5.69
These work best in a PCB but can be used on a solderless breadboard. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These are extra tall which are useful when putting your project in an enclosure and you want the buttons to stick out.
In stock
+ −
Add to wish list
1515-ADA Aluminum SMT Heat Sinks- 10 Pack
1515-ADA Aluminum SMT Heat Sinks- 10 Pack
US$7.62
The heat sink is a 0.25" x 0.25" (6.5mm x 6.5mm) square with 9 little 'fins' sticking out the top. The total height is 0.15" (3.65mm) so it will fit in any case or enclosure. They even come with a bit of thermal tape already on the bottom! Ideal for medium flat BGAs, TSSOPs, QFNs, etc!
In stock
+ −
Add to wish list
1495-ADA Cold 3-Wire Splice (UR) - 10 pack
1495-ADA Cold 3-Wire Splice (UR) - 10 pack
US$5.17
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 19-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1496-ADA Cold 2-Wire Splice (UY) - 10 pack
1496-ADA Cold 2-Wire Splice (UY) - 10 pack
US$5.17
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1494-ADA Cold Splice Wire Tap (UB) - 10 pack
1494-ADA Cold Splice Wire Tap (UB) - 10 pack
US$5.17
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1531-ADA MCX Jack to BNC RF Cable Adapter
1531-ADA MCX Male Plug to BNC Jack Female RF Cable Adapter
US$9.17
If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to a BNC antenna, this dongle will do the trick!
In stock
+ −
Add to wish list
Aluminum SMT Heat Sink - 0.26"x0.26" square - 0.39" tall
US$2.02
The heat sink is a 0.26" x 0.26" (6.75mm x 6.75mm) square with 3 tall 'fins' sticking out the top. The total height is 0.39" (10mm) but you can easily file it down if you need a shorter heat sink to fit in a case).
In stock
+ −
Add to wish list
1 - 11
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
13 - 22