Adafruit

US$2.63
Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great plug to make your own cable with. it's made out of durable metal with a flexible, sturdy spring for strain-relief.
In stock
+
Add to wish list

US$3.42
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector.
In stock
+
Add to wish list

US$3.07
This breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
In stock
+
Add to wish list

US$6.13
This breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar.
In stock
+
Add to wish list

US$8.96
These emit UV 'blacklight' in the UVA spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-reactive or 'glow-in-the dark'.
In stock
+
Add to wish list

US$7.62
These great looking LEDs are also fast and responsive with diffused color that will make your project glow! 
In stock
+
Add to wish list

US$23.45
This high power 4" diameter speaker will amp up any audio project where you need loud sound! It is 4 ohm impedance, rated for 20W continuous power. (This thing is really loud) It also has four handy mounting tabs 3 inches apart, and a grill that fits on top. The grill is to protect the cones, and is not necessary for use. 
Delivery within 2-3 weeks
+
Add to wish list

US$54.95
Bend all audio files to your will with this shield! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). 
In stock
+
Add to wish list

US$7.63
This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C.
In stock
+
Add to wish list

US$26.17
Timing belts are a fantastic way to transfer rotational motion (from a stepper motor) into linear motion (along a rail) and these GT2 belts are excellent for the task. 
In stock
+
Add to wish list

US$18.49
This is a very simple sensor to use, and if your microcontroller has analog input capability, you'll be ready to go really fast!
In stock
+
Add to wish list

US$6.13
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size.
In stock
+
Add to wish list

US$5.17
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size.
In stock
+
Add to wish list

US$78.67
This well made anemometer is designed to sit outside and measure wind speed with ease. To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind speed).
In stock
+
Add to wish list

US$26.17
Add a good quality, slim keyboard to your Raspberry Pi, Beagle Bone Black or other mini-computer with this sleek black chiclet keyboard. It's a full QWERTY keyboard with a USB cable and is compatible with all operating systems.
In stock
+
Add to wish list

US$30.63
Add a good quality, slim keyboard to your Raspberry Pi, Beagle Bone Black or other mini-computer with this sleek black chiclet keyboard. It's a full QWERTY keyboard with a wireless USB dongle and is compatible with all operating systems.
In stock
+
Add to wish list

US$29.95
This combo comes with a sleek black chiclet keyboard and and mouse both controlled by a single wireless USB dongle. The keyboard is a full QWERTY keyboard and is compatible with all operating systems. The mouse is comfortable for all hand sizes, has optical tracking, and two buttons + scroll wheel. 
Delivery within 2-3 weeks
+
Add to wish list

US$1.67
These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches.
In stock
+
Add to wish list

US$8.67
Each item comes with ten PCBs and each PCB is identical. PCB is .8mm/.03" thick, with ~10mm/0.4" spacing between the two rows.
In stock
+
Add to wish list

US$174.92
These are the same glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS displays you may have seen in iPad 3 or 4's. This product comes with only the brand new 9.7" diagonal TFT display module, no driver thunderbolt connector!
In stock
+
Add to wish list

US$6.92
This order comes with 5 Ruby Red "1206 size" LEDs, matched with a 220 ohm resistor.
In stock
+
Add to wish list

US$6.25
This order comes with 5 Emerald Green "1206 size" LEDs, matched with a 100 ohm resistor.
In stock
+
Add to wish list

US$6.25
This order comes with 5 Royal Blue "1206 size" LEDs, matched with a 100 ohm resistor.
In stock
+
Add to wish list

US$6.92
This order comes with 5 Warm White "1206 size" LEDs, matched with a 100 ohm resistor.
In stock
+
Add to wish list

US$34.92
This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease.
Delivery within 2-3 weeks
+
Add to wish list

US$13.13
This is the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. This is a set of two 2.8" x 1.2" speakers. We particularly like these speakers as they are small and enclosed for good audio volume and quality.
In stock
+
Add to wish list

US$15.45

The product kit comes with: A fully tested and assembled LED backpack stick. Two 12-bar bi-color bar-graphs. 4-pin header. A bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes. 

Delivery within 2-3 weeks
+
Add to wish list

US$13.92
This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
In stock
+
Add to wish list

US$8.67
This handy bent-wire stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics & TFT holding.
In stock
+
Add to wish list

US$4.75
One cable per order. The ribbon cable is 0.06mm/0.025" pitch and the connector is a 1.27mm (0.05") pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1" pitch connectors so be aware which you need!
Delivery within 2-3 weeks
+
Add to wish list

US$13.13
Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of ten!
In stock
+
Add to wish list

US$5.68
This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a quarter-sized breadboard (basically, a 'tiny' breadboard plus power rails) and turned that into a beautiful PCB.
In stock
+
Add to wish list