Our Brands

Adafruit

13 - 27
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
29 - 43
Newest Items First
15 Per Page
1329-ADA 2.1mm DC Barrel Plug to Alligator Clips
1329-ADA 2.1mm DC Barrel Plug to Alligator Clips
US$3.42
A high quality molded 2.1mm DC barrel plug is brought out to red (center positive) & black (ring negative) alligator clips. 2.1mm is a near-standard for electronics, so with this adapter you can easy clip and connect packs and wires to a power jack. Good for about 2 or 3 Amps of current and up to 24VDC.
In stock
+ −
Add to wish list
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
1352-ADA 4-Way 2.1mm DC Barrel Jack Splitter
US$8.67
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, four identical plugs to use!
In stock
+ −
Add to wish list
1351-ADA 2-Way 2.1mm DC Barrel Jack Splitter Squid
1351-ADA 2-Way 2.1mm DC Barrel Jack Splitter Squid
US$5.17
Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, two identical plugs to use!
In stock
+ −
Add to wish list
1448-ADA Compact Switching Power Supply - Selectable Output 3-12VDC
US$19.95
This model is 10 Watts and has 6 selectable outputs ranging from 3V to 12VDC and up to 1.5A output. It has a 2-prong plug, but takes 110VAC to 240VAC so you can use it anywhere with a simple plug adapter. 
In stock
+ −
Add to wish list
1430-ADA NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix
1430-ADA NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix
US$48.92
40 eye-blistering RGB LEDs adorn the NeoPixel shield for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin (Digital #6) is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization. 
In stock
+ −
Add to wish list
1429-ADA 24-Channel 12-bit PWM LED Driver - SPI Interface
1429-ADA 24-Channel 12-bit PWM LED Driver - SPI Interface
US$22.95
This chip can control 24 separate channels of 12-bit PWM output. Designed (and ideal) for LED control, this board is not good for driving servos.
Delivery within 2-3 weeks
+ −
Add to wish list
1426-ADA NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
1426-ADA NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
US$10.42
We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together!
In stock
+ −
Add to wish list
1389-ADA USB DIY Connector Shell - Type Mini-B Plug
1389-ADA USB DIY Connector Shell - Type Mini-B Plug
US$1.67
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, and USB A socket. 
In stock
+ −
Add to wish list
1388-ADA USB DIY Connector Shell - Type A Socket
1388-ADA USB DIY Connector Shell - Type A Socket
US$1.67
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, and mini B.
In stock
+ −
Add to wish list
1407-ADA Inductive Charging Set - 5V @ 500mA max
1407-ADA Inductive Charging Set - 5V @ 500mA max
US$17.42
This is a basic charger set, and it does work, providing 5V DC output from the output half when the input half is powered with 9V to 12VDC. You can draw as much as ~500mA if the coils are 2 or 3 mm apart. If you only need 100 or 200mA you can be up 7mm apart.
In stock
+ −
Add to wish list
1385-ADA UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output
1385-ADA UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output
US$17.42
This little circuit board may look tiny but inside is a high efficiency DC/DC step-down converter which can output up to 3 Amp at 5V without the need of any heat-sink or forced cooling. (It does get a bit toasty at 3A though) This UBEC is designed to replace a 5V supply in RC planes and 'copters but its also great for any kind of microcontroller or electronics project that runs off of 5V.
In stock
+ −
Add to wish list
1356-ADA Flora Color Sensor - TCS34725
1356-ADA Flora Color Sensor - TCS34725
US$12.25
We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately.
Delivery within 2-3 weeks
+ −
Add to wish list
1331-ADA Peltier Thermo-Electric Cooler Module - 5V 1A
1331-ADA Peltier Thermo-Electric Cooler Module - 5V 1A
US$26.17
This module is a 5V module, and is rated for 5W max (5V/1A) but when we plugged them in they seemed to draw more like 1.5A so we suggest our 5V/2A power adapter for use.
In stock
+ −
Add to wish list
1335-ADA Peltier Thermo-Electric Cooler Module+Heatsink Assembly - 12V 5A
1335-ADA Peltier Thermo-Electric Cooler Module+Heatsink Assembly - 12V 5A
US$61.17
The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute.
In stock
+ −
Add to wish list
1314-ADA Speaker - 3" Diameter - 4 Ohm 3 Watt
1314-ADA Speaker - 3" Diameter - 4 Ohm 3 Watt
US$3.42
This 3" diameter speaker cone is the perfect addition to any audio project where you need an 4 ohm impedance and 3W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.
In stock
+ −
Add to wish list
13 - 27
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
29 - 43