Our Brands

Adafruit

25 - 39
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Newest Items First
15 Per Page
1090 FLORA GPS Starter Pack
1090 FLORA GPS Starter Pack
CA$152.23
Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the Flora, and some parts to make a wearable remote control (or TV-B-Gone!): NPN transistors, long range IR LEDs, and matching resistors.
In stock
+ −
Add to wish list
258-ADA Lithium Ion Polymer Battery - 3.7v 1200mAh
258-ADA 3.7v 1200mAh Lithium Ion Polymer Battery
CA$21.07
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ model (328-ADA). The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.
In stock
+ −
Add to wish list
641 Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
641 Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
CA$11.77
This thread is 3 ply, thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles. This may be sew-able by a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable/e-textile project.
In stock
+ −
Add to wish list
640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft
CA$11.93
This thread is 2 ply, a little thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles or with a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable/e-textile project.
In stock
+ −
Add to wish list
1126 Sewable Snaps - 5mm Diameter - Card of 24
1126 Sewable Snaps - 5mm Diameter - Card of 24
CA$6.69
The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads! Snaps make a great connector for wearables-- solder one side to the board and sew the other to your project with conductive thread! This card comes with 24 complete snaps (socket and stud pairs).
In stock
+ −
Add to wish list
727 Battery Holder 3 x AAA with On/Off Switch and 2-Pin JST
727 Battery Holder 3 x AAA with On/Off Switch and 2-Pin JST
CA$3.76
Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of life with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5V
In stock
+ −
Add to wish list
1170 Magnetic Pin Back
1170 Magnetic Pin Back
CA$3.31
These magnetic pin backs have two pieces: a metal bar with adhesive strip and a plastic piece with two strong rare-earth magnets. Affix the metal bar to your FLORA projects-- it's just the right size! Then attach your FLORA project to any garment without poking holes in your clothes.
Delivery within 2-3 weeks
+ −
Add to wish list
615 Needle set - 3/9 sizes - 20 needles
615 Needle set - 3/9 sizes - 20 needles
CA$3.31
2 x #3 needles (0.04" x 1.75") (1mm x 45mm). 6 x #5 needles (0.0375" x 1.65") (0.95mm x 42mm). 8 x #7 needles (0.035" x 1.55") (0.9mm x 39mm). 4 x #9 needles (0.027" x 1.35") (0.7mm x 35mm).
In stock
+ −
Add to wish list
328 Lithium Ion Polymer Battery - 3.7v 2600mAh
328-ADA 3.7v 2500mAh Lithium Ion Polymer Battery
CA$30.68
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery, we also have a 1200mAh model (258-ADA).
In stock
+ −
Add to wish list
261 JST 2-pin cable
261 JST 2-pin cable
CA$1.84
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger!
In stock
+ −
Add to wish list
1085 ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
1085 ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
CA$24.99
This provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels.
In stock
+ −
Add to wish list
1109 Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi
CA$47.99
This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks.
In stock
+ −
Add to wish list
802 Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
802 Adafruit 1.8" 18-bit Color TFT Shield w/microSD and Joystick
CA$58.99
This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob)!
In stock
+ −
Add to wish list
85-ADA Shield Stacking Headers for Arduino (R3 Compatible)
85-ADA Shield Stacking Headers for Arduino (R3 Compatible)
CA$3.76
These are standard 6-pin, 8-pin and 10-pin 0.1" spacing female headers...with a twist! The pins are extra long which means you can use these to stack shields!
In stock
+ −
Add to wish list
828 Liquid Flow Meter - Plastic 1/2" NPT Threaded
828 Liquid Flow Meter - Plastic 1/2" NPT Threaded
CA$19.14
Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter.
In stock
+ −
Add to wish list
25 - 39
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47