Our Brands

Adafruit

15 - 29
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
31 - 45
Newest Items First
15 Per Page
1429-ADA 24-Channel 12-bit PWM LED Driver - SPI Interface
1429-ADA 24-Channel 12-bit PWM LED Driver - SPI Interface
CA$25.22
This chip can control 24 separate channels of 12-bit PWM output. Designed (and ideal) for LED control, this board is not good for driving servos.
Delivery within 2-3 weeks
+ −
Add to wish list
1426-ADA NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
1426-ADA NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
CA$11.45
We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together!
In stock
+ −
Add to wish list
1389-ADA USB DIY Connector Shell - Type Mini-B Plug
1389-ADA USB DIY Connector Shell - Type Mini-B Plug
CA$1.84
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, and USB A socket. 
In stock
+ −
Add to wish list
1388-ADA USB DIY Connector Shell - Type A Socket
1388-ADA USB DIY Connector Shell - Type A Socket
CA$1.84
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, and mini B.
In stock
+ −
Add to wish list
1407-ADA Inductive Charging Set - 5V @ 500mA max
1407-ADA Inductive Charging Set - 5V @ 500mA max
CA$19.14
This is a basic charger set, and it does work, providing 5V DC output from the output half when the input half is powered with 9V to 12VDC. You can draw as much as ~500mA if the coils are 2 or 3 mm apart. If you only need 100 or 200mA you can be up 7mm apart.
In stock
+ −
Add to wish list
1385-ADA UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output
1385-ADA UBEC DC/DC Step-Down (Buck) Converter - 5V @ 3A output
CA$19.14
This little circuit board may look tiny but inside is a high efficiency DC/DC step-down converter which can output up to 3 Amp at 5V without the need of any heat-sink or forced cooling. (It does get a bit toasty at 3A though) This UBEC is designed to replace a 5V supply in RC planes and 'copters but its also great for any kind of microcontroller or electronics project that runs off of 5V.
In stock
+ −
Add to wish list
1356-ADA Flora Color Sensor - TCS34725
1356-ADA Flora Color Sensor - TCS34725
CA$13.46
We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately.
Delivery within 2-3 weeks
+ −
Add to wish list
1331-ADA Peltier Thermo-Electric Cooler Module - 5V 1A
1331-ADA Peltier Thermo-Electric Cooler Module - 5V 1A
CA$28.76
This module is a 5V module, and is rated for 5W max (5V/1A) but when we plugged them in they seemed to draw more like 1.5A so we suggest our 5V/2A power adapter for use.
In stock
+ −
Add to wish list
1335-ADA Peltier Thermo-Electric Cooler Module+Heatsink Assembly - 12V 5A
1335-ADA Peltier Thermo-Electric Cooler Module+Heatsink Assembly - 12V 5A
CA$67.22
The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute.
In stock
+ −
Add to wish list
1314-ADA Speaker - 3" Diameter - 4 Ohm 3 Watt
1314-ADA Speaker - 3" Diameter - 4 Ohm 3 Watt
CA$3.76
This 3" diameter speaker cone is the perfect addition to any audio project where you need an 4 ohm impedance and 3W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.
In stock
+ −
Add to wish list
1313-ADA Speaker - 3" Diameter - 8 Ohm 1 Watt
1313-ADA Speaker - 3" Diameter - 8 Ohm 1 Watt
CA$5.68
This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.
In stock
+ −
Add to wish list
1312-ADA Breadboard-friendly RGB Smart NeoPixel - Pack of 4
1312-ADA Breadboard-friendly RGB Smart NeoPixel - Pack of 4
CA$15.30
These pixels have full 24-bit color ability with PWM taken care of by the controller chip. Since the LED is so bright, you need less current/power to get the effects you want.
Delivery within 2-3 weeks
+ −
Add to wish list
1411-ADA 16-Channel 12-bit PWM/Servo Shield - I2C interface
1411-ADA 16-Channel 12-bit PWM/Servo Shield - I2C interface
CA$29.95
With this shield you can make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts.
In stock
+ −
Add to wish list
1400 Adafruit Push-button Power Switch Breakout
1400 Adafruit Push-button Power Switch Breakout
CA$10.08
This is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakout uses a latching analog circuit that is triggered by a push of the button. Press once to turn on, then press again to turn off.
In stock
+ −
Add to wish list
1390-ADA USB DIY Connector Shell - Type Micro-B Plug
1390-ADA USB DIY Connector Shell - Type Micro-B Plug
CA$2.22
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug 1387-ADA, and micro B.
Delivery within 2-3 weeks
+ −
Add to wish list
15 - 29
23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
31 - 45