Our Brands

Adafruit

11 - 25
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
27 - 41
Newest Items First
15 Per Page
1471-ADA Large Tin With Clear Top Window
1471-ADA Large Tin With Clear Top Window
CA$9.53
This tin is about 3.5" by 5.5" so it's got plenty of space for an Arduino Uno or Mega, or Raspberry Pi, or Beagle Bone, or really any dev board you could think of. The tin is sturdy but easy to punch holes in or cut with tin snips.
In stock
+ −
Add to wish list
1489-ADA Tactile Switch Buttons (6mm slim) x 20 pack
1489-ADA Tactile Switch Buttons (6mm slim) x 20 pack
CA$9.53
These are half the width of classic 6mm tactile switches so they line up better on a breadboard, just plug them into every-other row. These work best in a PCB but can be used on a solderless breadboard. The two pins are normally open (disconnected) and when the button is pressed they are momentarily closed.
In stock
+ −
Add to wish list
1490-ADA Tactile Switch Buttons (6mm tall) x 10 pack
1490-ADA Tactile Switch Buttons (6mm tall) x 10 pack
CA$6.25
These work best in a PCB but can be used on a solderless breadboard. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These are extra tall which are useful when putting your project in an enclosure and you want the buttons to stick out.
In stock
+ −
Add to wish list
1515-ADA Aluminum SMT Heat Sinks- 10 Pack
1515-ADA Aluminum SMT Heat Sinks- 10 Pack
CA$8.37
The heat sink is a 0.25" x 0.25" (6.5mm x 6.5mm) square with 9 little 'fins' sticking out the top. The total height is 0.15" (3.65mm) so it will fit in any case or enclosure. They even come with a bit of thermal tape already on the bottom! Ideal for medium flat BGAs, TSSOPs, QFNs, etc!
In stock
+ −
Add to wish list
1495-ADA Cold 3-Wire Splice (UR) - 10 pack
1495-ADA Cold 3-Wire Splice (UR) - 10 pack
CA$5.68
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 19-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1496-ADA Cold 2-Wire Splice (UY) - 10 pack
1496-ADA Cold 2-Wire Splice (UY) - 10 pack
CA$5.68
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1494-ADA Cold Splice Wire Tap (UB) - 10 pack
1494-ADA Cold Splice Wire Tap (UB) - 10 pack
CA$5.68
Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then squeeze down with parallel-jaw or slip joint pliers - don't use needle-noses, they have too much angle and not enough force.
In stock
+ −
Add to wish list
1531-ADA MCX Jack to BNC RF Cable Adapter
1531-ADA MCX Male Plug to BNC Jack Female RF Cable Adapter
CA$10.08
If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to a BNC antenna, this dongle will do the trick!
In stock
+ −
Add to wish list
Aluminum SMT Heat Sink - 0.26"x0.26" square - 0.39" tall
CA$2.22
The heat sink is a 0.26" x 0.26" (6.75mm x 6.75mm) square with 3 tall 'fins' sticking out the top. The total height is 0.39" (10mm) but you can easily file it down if you need a shorter heat sink to fit in a case).
In stock
+ −
Add to wish list
1518-ADA Flex Perma-Proto - Half-sized Breadboard Flex-PCB
1518-ADA Flex Perma-Proto - Half-sized Breadboard Flex-PCB
CA$14.43
It's extremely bendable, and you can cut it easily with scissors. It has a bend radius of 1cm or better (you can also crease it but that might break a trace if you crease a trace) and you can solder any components to the pads.
In stock
+ −
Add to wish list
1475-ADA USB Audio Adapter - Works with Raspberry Pi
1475-ADA USB Audio Adapter - Works with Raspberry Pi
CA$9.53
For when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume. We like this particular dongle for not being too bulky, you can plug it in without blocking the secondary USB port.
In stock
+ −
Add to wish list
1501-ADA Trinket - Mini Microcontroller - 5V Logic
1501-ADA Trinket - Mini Microcontroller - 5V Logic
CA$15.30
It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. They wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.
In stock
+ −
Add to wish list
1512-ADA Lock-style Solenoid - 12VDC
1512-ADA Lock-style Solenoid - 12VDC
CA$28.76
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end. 
In stock
+ −
Add to wish list
1222-ADA Gemma - Miniature wearable electronic platform
1222-ADA Adafruit GEMMA v2 - Miniature wearable electronic platform
CA$18.65
Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!
In stock
+ −
Add to wish list
260-ADA USB cable - A/MiniB - 3ft
260-ADA USB cable - A/MiniB - 3ft
CA$5.47

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things). Approximately 3 feet / 1 meter long. 

In stock
+ −
Add to wish list
11 - 25
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
27 - 41