WAVE-24013 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning (SIM7600E-H Pre-soldered version plus SMA Antenna)

4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning (SIM7600E-H Pre-soldered version plus SMA Antenna)

SIM7600X 4G Module

Supports 4G/3G/2G Communication And GNSS Positioning

Version Options

Features At A Glance

• Compatible with 2G/3G/4G network
• Supports dial-up, telephone call, SMS, TCP, UDP, MQTT, DTMF, HTTP, FTP, etc.
• Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
• Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc.
• Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header
• Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility
• Built in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32/Arduino
• Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery)
• Onboard multiple protection circuits: TVS protection for SIM card, power supply isolation between the USB port and pin header, VIN pin power supply anti-reverse, and so on, more safe and reliable
• 2x LED indicators, easy to monitor the operating status
• Adopts SIMCOM recommended power supply solution, supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use.
• Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card
• Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
• Adapting 3-ch antenna connector, IPEX antenna connector version and SMA connector version optional, supports mass customization

Specifications

4G / 3G / 2G Support

Dial-Up On Windows/Linux

LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink)

3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink)

Compatible With Multiple Platforms

Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino/STM32 Demos

And User Manuals, Easier To Develop And Integrate, And Better Expansibility

Cloud Communication

Supports Communication Protocols Including

TCP, UDP, MQTT, MQTTS, FTP, FTPS, HTTP, HTTPS...

GNSS Positioning 

Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station Positioning

* GNSS antenna is NOT included By default, please choose the GNSS antenna according to your needs:

SMS Sending And Receiving Support 

Making Telephone Call* Or Sending SMS By AT Commands

*SIM7600X module supports telephone call function, since without adapting PCM and audio jack onboard, the AT commands and USB AUDIO development are required to realize telephone call via USB port

Small And Easy Integration

Castellated Design, Small Size, High Integration

Adapting Most Of The Common Interfaces, Easy To DIY And Embed Into The Device

Onboard Resources

Pinout Definition