Our Brands

Waveshare

1 2 3 4 5 6 7 8 9 10
4 - 18
Newest Items First
15 Per Page
WAVE-26545 Industrial Isolated USB To 4-Ch RS485 Converter (B), CH344L Chip, Multi Protection Circuits, Multi Systems Support
US$31.62
Adopts original CH344L chip, fast communicating, stable and reliable, better compatibility. Supports USB to 4-ch isolated RS485, convenient for expanding multiple RS485 industrial serial devices. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal.
In stock
+ −
Add to wish list
WAVE-26583 PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
US$13.42
Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-26089 Clear Acrylic Case for Raspberry Pi 5, Supports installing Official Active Cooler
US$9.05
Precise Openings For Sorts Of Connectors, Supports Installing Official Active Cooler (Not Included). Openings For 40PIN GPIO, PCIe, DSI/CSI Interfaces And Airflow Vents On The Top And For RTC Battery Connector/UART Header On The Side, With Power On/Off Button. Easy To Pull & Plug TF Card On The Bottom.
In stock
+ −
Add to wish list
WAVE-26088 Transparent and Blue Acrylic Case for Raspberry Pi 5, Supports installing Official Active Cooler
US$9.05
Precise Openings For Sorts Of Connectors, Supports Installing Official Active Cooler (Not Included). Easy To Pull & Plug TF Card On The Bottom, With Power On/Off Button On The Side.
In stock
+ −
Add to wish list
WAVE-26244 Industrial 8-Ch Digital Input & Output Module, DC 7~36V Wide Voltage Power Supply, Modbus RTU Protocol
US$34.08
This is an industrial grade 8DI / 8DO digital isolated input & output module with RS485 control interface. Supports passive / active input, adopts Modbus RTU protocol with built-in protection circuits such as power isolation, magnetical isolation, resettable fuse, and TVS.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-26337 2.66inch e-Paper Module (G), 360x184, Red/Yellow/Black/White, SPI Interface
US$25.16
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
In stock
+ −
Add to wish list
WAVE-26333 RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protection Circuits
US$44.36
Multiple Industrial Protections Such As Galvanic Isolation, Lightningproof Protection, And ESD Protection. Suitable For Industrial Control Equipment And/Or Applications With High Communication Requirement.
In stock
+ −
Add to wish list
WAVE-26077 TTL UART To CAN Mini Module, With TTL And CAN Conversion Protocol, Supports Bi-Directional Transmitting And Receiving
US$15.42
WS-TTL-CAN is a TTL UART to CAN module which is compact and easy to integrate, onboard high-performance MCU, with TTL and CAN conversion protocol, easily achieving UART to CAN via simple configuration.
In stock
+ −
Add to wish list
WAVE-26541 ESP32-S3 Development Board, 32-bit LX7 Dual-core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS Round LCD
US$26.16
ESP32-S3-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch LCD display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.
In stock
+ −
Add to wish list
WAVE-26379 RP2040 Microcontroller Camera Development Board, Onboard HM01B0 Grayscale Camera And 1.14inch IPS LCD Display
US$27.07
PICO-CAM-A is a cost-effective, high-performance MCU camera board based on Raspberry Pi RP2040, onboard HM01B0 grayscale camera and 1.14inch IPS LCD display, suitable for application scenarios such as image information capture.
In stock
+ −
Add to wish list
WAVE-26542 RP2040-LoRa Development Board, Integrates SX1262 RF Chip, Long-Range Communication, HF Version
US$22.70
RP2040-LoRa is a LoRa development board using the new generation of SX1262 RF chip, provides better performance than the SX127X series in power consumption, communication distance and power efficiency. Adopts LoRa modulation technology to solve the problem in the traditional design solutions which can not balance distance, anti-interference, and power consumption at the same time. Combines with LoRa gateway for connecting Cloud Server such as TTN and ChirpStack for quick verification.
In stock
+ −
Add to wish list
WAVE-24984 360° Omnidirectional High-Torque 2-Axis Expandable Pan-Tilt Camera Module, Driven By Serial Bus Servos, Based On General Driver Board For Robots (US Power Plug)
US$171.76
This Is A High-Torque 2-DOF Expandable Pan-Tilt Camera Module, Adopts Serial Bus Servos For Joints Driven. The Horizontal PAN Axis Rotation Range Up To ±180° (360° In Total), The Vertical TILT Axis Rotation Range Up To -45° ~ 90°. Based On The General Driver Board For Robots, Open Source Control Demos For Web APP To Achieve Photo Taking, Video Recording, Face Detection, Motion Detection, Etc. Supports Flexible Expansion And Secondary Development.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-26405 Waveshare ESP32-GEEK Development Board, Based On ESP32-S3R2 Controller Chip, With 1.14inch 65K Color LCD, Supports WiFi & Bluetooth LE
US$18.15
ESP32-S3-GEEK is a geek development board designed by Waveshare, onboard USB-A port, 1.14inch LCD screen, TF card slot, and other peripherals. Supports 2.4GHz WiFi and BLE 5, with integrated 16MB Flash & 2MB PSRAM, provides I2C port, UART port, and GPIO header, bringing more possibilities for your project.
In stock
+ −
Add to wish list
WAVE-26399 Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard
US$61.38
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-26357 RTC 64mAh Capacity Battery for Raspberry Pi 5, Supports Recharging, 2PIN JST Connector
US$4.50
RTC Battery For Raspberry Pi 5 Supports Recharging, 2PIN JST Connector, 64mAh Capacity.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10
4 - 18