Our Brands

Sparkfun

1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 21
Oldest Items First
15 Per Page
WRL-00593 SMA Female PCB Mount Connector
WRL-00593 SMA Female PCB Mount Connector
US$2.73
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.
In stock
+ −
Add to wish list
WRL-09144 U.FL SMD Connector
WRL-09144 U.FL SMD Connector
US$2.59
Great for tight PCB layouts that require antenna connections.
In stock
+ −
Add to wish list
WRL-10533 RF Link Receiver - 4800 bps (315 MHz)
WRL-10533 RF Link Receiver - 4800 bps (315 MHz)
US$9.26
This is a wireless receiver to work with our 315 MHz transmitter. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
In stock
+ −
Add to wish list
WRL-10534 RF Link Transmitter - 434 MHz
WRL-10534 RF Link Transmitter - 434 MHz
US$7.33
This is a wireless transmitter to work with our 434MHz receiver. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
In stock
+ −
Add to wish list
WRL-10532 RF Link Receiver - 4800 bps (434 MHz)
WRL-10532 RF Link Receiver - 4800 bps (434 MHz)
US$9.26
This is a wireless receiver to work with our 434MHz transmitter. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.
In stock
+ −
Add to wish list
WRL-00691 Transceiver nRF24L01+ Module with Chip Antenna
WRL-00691 Transceiver nRF24L01+ Module with Chip Antenna
US$29.33
This is the newest 2.4GHz transceiver from Nordic Semiconductor, using the nRF24L01+ module. Dimensions: 0.8x0.9". This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature - very nice!
In stock
+ −
Add to wish list
RTL-10774 Touch Sensor Shield
RTL-10774 Touch Sensor Shield
US$22.33
The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the remaining 3 electrode connections.
In stock
+ −
Add to wish list
TOL-10405 Needle Set
TOL-10405 Needle Set
US$2.73
This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm, 1.23mm thick needles and two smaller 39mm, 0.67mm thick needles.
In stock
+ −
Add to wish list
COM-10063 Tactile Switch 5-Way
COM-10063 Tactile Switch 5-Way
US$2.73
This is a surface mount 5-way tactile switch allows for a joystick-like interface in a very small package. Sometimes you want a small input and a single button just won't cut it. These are surface mount, but easily soldered.
In stock
+ −
Add to wish list
COM-09277 Button Pad 2x2 - Breakout PCB
COM-09277 Button Pad 2x2 - Breakout PCB
US$6.93
Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
COM-07836 Button Pad 2x2 - Led Compatible
COM-07836 Button Pad 2x2 - Led Compatible
US$4.13
Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
In stock
+ −
Add to wish list
COM-08746 Button Pad 2x2 Top Bezel
COM-08746 Button Pad 2x2 Top Bezel
US$5.53
Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards. Using two of these bezels with two of the bottom bezels will create a 4x4 bezel appropriate for the full button pad.
In stock
+ −
Add to wish list
COM-08033 Button Pad 4x4 - Led Compatible
COM-08033 Button Pad 4x4 - Led Compatible
US$13.93
This is a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
In stock
+ −
Add to wish list
COM-07835 Button Pad 4x4 - Led Compatible
COM-07835 Button Pad 4x4 - Led Compatible
US$13.93
Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
In stock
+ −
Add to wish list
COM-09339 Concave Button - Black
COM-09339 Concave Arcade Button - Black
US$4.25
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 21