Sparkfun

1 2 3 4 5 6 7 8
2 - 16
US$646.07
This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
Delivery within 2-3 weeks
+
Add to wish list

US$162.33

This is the comprehensive guide to ZigBee wireless networks. This kit includes many of the parts and pieces you will need to work through the examples in the book. If you're serious about learning everything you need to know about XBee networks, this kit and the book will get you up to speed in no time (or as long as it takes you to get through the book).

In stock
+
Add to wish list

US$153.93

These are bare addressable 5 meter long RGB LED strips that come packed with 60 WS2812s per meter. As these are bare LED strips that have no protective coating, your project won't be water proof but there is access to each WS2812 LED and each strip length can be easily modified. You will be able to control each LED RGB individually giving you the ability to create cool lighting effects for your car or perhaps under cabinet lighting in your kitchen!

In stock
+
Add to wish list

US$145.55
This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit displays a digital readout of the actual air temperature with a flow rate of up to 24L per minute. This very powerful unit can be used for multiple applications including standard SMD reflow/repair/removal, thermal IC stress testing, thermoplastic welding, and shrink-wrapping.
In stock
+
Add to wish list

US$139.93
The Intel® Edison is an ultra-small computing platform that will change the way you look at embedded electronics. Each Edison packs a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single-board computer. The Edison is powered by the Intel®Atom™ SoC dual-core CPU and includes an integrated WiFi, Bluetooth LE and 70-pin connector to attach a veritable slew of shield-like “Blocks,” which can be stacked on top of one another. It’s no wonder how this little guy is lowering the barrier of entry on the world of electronics! This Edison Base Kit includes all the basic ingredients you need to get started with Intel’s incredibly tiny computer platform. With this pack, you will be able to snap essential parts to your Edison that provide basic functionality and turn it into a modular Linux computer.
In stock
+
Add to wish list

US$120.30
The Qwiic Pro kit provides you with a RedBoard Turbo, two sensors, two accessory boards, and all the cables you need to start utilizing Qwiic and I2C easily. This kit was designed to allow users to get started with Arduino without the need for soldering or breadboarding. Hooking up a handful of inputs and outputs to a RedBoard has never been so easy. Use the joystick, accelerometer, or proximity sensor, and one small display for outputting text, graphics, or even a microPong game!
In stock
+
Add to wish list

US$111.93
This  is a package GPS Shield Kit with EM406 GPS receiver and headers included inside a a clear clamshell. Adding GPS to your Arduino has never been easier. Multiple GPS receivers attach easily to the shield, and with the example sketch, you will be able to locate your exact position within a few meters.
In stock
+
Add to wish list

US$108.43
The SEN-15901 is a weather meter kit requiring assembly.
In stock
+
Add to wish list

US$104.14

This GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers that use MediaTek chip solution.

In stock
+
Add to wish list

US$99.95
This is a fingerprint scanner capable of gathering and storing unique finger prints. The Nitgen RS232 serial fingerprint scanner is a powerful ADSP-BF531 Blackfin based system. Simply hold your finger on the optical scanner, query the device over serial, and you will be issued a unique ID. Use that ID within your embedded system to determine access levels, time clocks, door locks, etc.
In stock
+
Add to wish list

US$90.93
This is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our Arduino Pros and LilyPad Arduinos. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)!
In stock
+
Add to wish list

US$90.93
The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces of hardware to get you started, and connecting components to get you hooked up. Using the Scratch programming language, you can easily create simple interactive programs based on the input from sensors. The PicoBoard incorporates a light sensor, sound sensor, a button and a slider, as well as four additional inputs that can sense electrical resistance via included cables.
In stock
+
Add to wish list

US$89.95
These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. These are not a regular set of crimp pliers. These pliers are capable of crimping very small 1.00 - 1.9mm crimp pins. These work well with JST PH, SH, SHL, and ZH series pins as well as DF14 HRS and micro-latch from Molex.
In stock
+
Add to wish list

US$84.86
The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency.
Delivery within 2-3 weeks
+
Add to wish list

US$84.47
This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large enough quantity to not be afraid of making a few mistakes. 
In stock
+
Add to wish list
1 2 3 4 5 6 7 8
2 - 16