Our Brands

Sparkfun

1 2 3 4 5 6 7 8 9 10
4 - 18
Sort Alphabetically: Z to A
15 Per Page
WRL-00558 Duck Antenna RP-SMA - Large 2.4 GHz
WRL-00558 Duck Antenna RP-SMA - Large 2.4 GHz
US$13.93
This is a 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance.
In stock
+ −
Add to wish list
WRL-00145 Duck Antenna RP-SMA 2.4 GHz
WRL-00145 Duck Antenna RP-SMA 2.4 GHz
US$11.13
This is a 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long.
In stock
+ −
Add to wish list
WIG-13660 WAV Trigger
US$84.86
The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency.
Delivery within 2-3 weeks
+ −
Add to wish list
WIG-13118 SparkFun Servo Trigger
US$26.61
The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the Servo Trigger is able to tell an attached servo motor to move from position A to position B. To use the Servo Trigger, you simply connect a hobby servo and a switch, then use the on-board potentiometers to adjust the start/stop positions and the transition time. You can use a hobby servos in your projects without having to do any programming!
In stock
+ −
Add to wish list
WIG-11560 WonderBeeps
WIG-11560 WonderBeeps
US$83.93
The WonderBeeps board is a really simple way of adding wireless capabilities to your next project. Simply connect a standard electret mic, supply 3-5VDC and play the Beeps! The Beeps are transmitted at around 8Khz so they can be heard but they can be embedded within other sounds to make them almost unnoticed.
In stock
+ −
Add to wish list
USB-AM-PCRA USB Type A 4-Pin DIP Male Right Angle PCB Mount Connector
US$0.99

This is a USB type A male connector ideal for making very small USB dongle devices that plug directly into a computer USB port or through a USB A to A extension cable.

In stock
+ −
Add to wish list
US1881 - Hall Effect Sensor
US1881 - Hall Effect Sensor
US$2.09
This is an integrated Hall effect latched sensor. Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor.
In stock
+ −
Add to wish list
Triple Output High Power RGB LED
US$7.81
So much power and light from such a small package. This 3W per channel, Triple Output High Power RGB LED is sure to shed a lot of light on any project you add it to. This LED acts as any other LED except they require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Please be aware that with all three LEDs (9W total output), you will need additional heat sinking.
In stock
+ −
Add to wish list
TOL-21253 Hot-Air Rework Station - 8508D
US$145.55
This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit displays a digital readout of the actual air temperature with a flow rate of up to 24L per minute. This very powerful unit can be used for multiple applications including standard SMD reflow/repair/removal, thermal IC stress testing, thermoplastic welding, and shrink-wrapping.
In stock
+ −
Add to wish list
TOL-13193 Crimping Pliers - 28-20 AWG
US$43.49
These pliers are capable of crimping very small 0.25 - 1.5mm crimp pins and 28-20 AWG wires together. All you need to do is press the handles together with enough force and the pliers will release, once this happens you know your crimping is done! These work well with JST PH, SH, SHL, and ZH series pins.
Delivery within 2-3 weeks
+ −
Add to wish list
TOL-12942 Bus Pirate - v3.6a
US$45.42
The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.
Delivery within 2-3 weeks
+ −
Add to wish list
TOL-12573 Tweezers - Straight (cross-lock, ESD Safe)
TOL-12573 Tweezers - Straight (cross-lock, ESD Safe)
US$5.88
They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you're working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components.
In stock
+ −
Add to wish list
TOL-12572 Tweezers - Curved (cross-lock, ESD Safe)
TOL-12572 Tweezers - Curved (cross-lock, ESD Safe)
US$5.88
They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you're working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components.
In stock
+ −
Add to wish list
TOL-12078-P Multimeter Probes - Needle Tipped
US$11.78
These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these...
In stock
+ −
Add to wish list
TOL-12078 Multimeter Probes - Needle Tipped
TOL-12078 Multimeter Probes - Needle Tipped
US$8.33

These SparkFun needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Dimensions: 36" Long.

In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10
4 - 18