Our Brands

Sparkfun

1 2 3 4 5 6 7 8 9 10 11
5 - 19
Newest Items First
15 Per Page
DEV-18615 Ethernet Kit for Teensy 4.1
US$7.69
The Ethernet Kit for Teensy 4.1 from PJRC includes an Ethernet MagJack connector, a bare circuit board, one ribbon cable, two headers, and a capacitor. As this is a kit that require assembly, some beginner-level soldering is required.
In stock
+ −
Add to wish list
WRL-18567 SparkFun Qwiic WiFi Shield - DA16200
US$28.93
SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped RF filter, 4MB flash memory, and an on-board chip antenna. With the addition of a Qwiic connector, multiple GPIO options, JTAG connectors for deep dive programming, and you've got everything you need to get your R3 layout device ready to set up your next IoT project.
In stock
+ −
Add to wish list
SEN-18521 SparkFun Digital Temperature Sensor Breakout - AS6212 (Qwiic)
US$13.50
This SparkFun Qwiic Digital Temperature Sensor Breakout provides a combination of high temperature accuracy with excellent low power consumption using the AS6212 digital temperature sensor from ams AG. The sensor measures temperature data up to ±0.2°C; accuracy over a wide range (-40°C; to +125°C;) and consumes an average of 6µA in normal operation (0.1µA in standby).
In stock
+ −
Add to wish list
KIT-18625 SparkFun Qwiic Motor Driver Kit
US$38.57
The SparkFun Qwiic Motor Driver Kit gives you the basic parts needed to get up and running quickly with a motor driven project. Along with the included Qwiic Motor Driver is a 100mm Qwiic cable, a pair of hobby gearmotors, and a LiPo battery as a power supply. The SparkFun Qwiic Motor Driver boasts 4245 PSOC and 2-channel motor ports, the SparkFun Qwiic Motor Driver is designed to communicate over I2C to make setting up your next robotic project as fast and easy as possible! Utilizing our handy Qwiic system and screw terminals for motor and power hook-up, no soldering is required to connect it to the rest of your system.
In stock
+ −
Add to wish list
DEV-16832 SparkFun OpenLog Artemis
US$63.47
The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code! OpenLog Artemis, or "OLA," automatically detects, configures, and logs Qwiic sensors. The OLA is specifically designed for users who just need to capture a lot of data to a CSV and get back to their larger project.
Delivery within 2-3 weeks
+ −
Add to wish list
COM-18566 SparkFun Qwiic Alphanumeric Display - Green
US$13.60
These green fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
In stock
+ −
Add to wish list
COM-16917 SparkFun Qwiic Alphanumeric Display - Blue
US$13.60
These blue fourteen-segment digits allow you display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
In stock
+ −
Add to wish list
COM-16916 SparkFun Qwiic Alphanumeric Display - Red
US$13.60
These red fourteen-segment digits allow you display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required! The SparkFun Alphanumeric Display Arduino library makes printing strings to the display as easy as calling the print() function.
In stock
+ −
Add to wish list
WRL-12861 Interface Cable - SMA Female to SMA Male (25cm)
WRL-12861-MF-100 Interface Cable - SMA Male to SMA Female (100cm)
US$11.60
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 100cm (39.37") long and has a 50Ω impedance that can handle frequencies up to 17 GHz.
In stock
+ −
Add to wish list
WRL-12861-MM-100 Interface Cable - SMA Male to SMA Male (100cm)
US$11.60
This is a basic SMA (Sub-Miniature A) male to male connector cable. Each cable is 100cm (39.37") long and has a 50Ω impedance that can handle frequencies up to 17 GHz.
In stock
+ −
Add to wish list
SEN-16294 Qwiic Thermocouple Amplifier - MCP9600
US$40.50
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system.
In stock
+ −
Add to wish list
SEN-16295 Qwiic Thermocouple Amplifier - MCP9600 (screw terminals)
US$27.29
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction)
In stock
+ −
Add to wish list
SparkFun Qwiic pHAT Extension for Raspberry Pi 400
US$8.78
The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side up, or connect a Qwiic-enabled device to the I2C bus (GND, 3.3V, SDA, and SCL).
In stock
+ −
Add to wish list
Flexible Qwiic Cable - 500mm
US$3.89
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures.
In stock
+ −
Add to wish list
Flexible Qwiic Cable - 200mm
US$2.81
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11
5 - 19