Seeed Studio

US$5.59
4 pin Female Jumper to Grove 4 pin Conversion Cable is being made available based on requests from customers to use Grove modules directly with Arduino. The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Seeed’s Grove modules to any 2.54mm pitch connector.
In stock
+
Add to wish list

US$4.55
Grove - Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. This resistance value alters the output of a voltage divider which is measured by an analog input pin and converted to a temperature value. The operating range is -40 to 125°C , with an accuracy of 1.5°C .
In stock
+
Add to wish list

US$35.00
This G1/2 micro hydro generator provides you clean and renewable electricity. With the help of the regulator circuit inside, the output of this generator is stable at 3.6V. And the capacity of battery is improved from 300mAh to 700mAh compared to the old version. Time to replace the Li-po batteries in your waterside projects with the green and more accessible hydro power.
In stock
+
Add to wish list

US$39.95
This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial communication configuration. It features 22 tracking / 66 acquisition channel GPS receiver. The sensitivity of tracking and acquisition both reach up to -160dBm, making it a great choice for personal navigation projects and location services, as well as an outstanding one among products of the same price class.
In stock
+
Add to wish list

US$5.59
4 pin Female Jumper to Grove 4 pin Conversion Cable is being made available based on requests from customers to use Grove modules directly with Arduino. The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Seeed’s Grove modules to any 2.54mm pitch connector.
In stock
+
Add to wish list

US$83.65
Features: Operating Voltage: 6V ~ 28V. DC/DC output: 5V 1000mA @ "5V" pin. Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak). Output Duty Range: 0%~100%. Output short-circuit protection (short to VPWR or GND). Over-current limiting (regulation) via internal constant-off-time PWM. Temperature dependant current limit threshold reduction. Raspberry compatible.
In stock
+
Add to wish list

US$1.61
Dimensions: 41.6 x 41.1 x 9.6 mm. Features: Small and portable. Heat-resistant plastic. Stainless steel bracket. 
In stock
+
Add to wish list

US$15.33
Specifications: Input Current: 0~100A AC. Output Mode: 0~50mA. Non-linearity: ±3%. Turn Ratio: 100A:0.05A. Resistance Grade: Grade B. Work Temperature: -25°C ~ ﹢70°C. Dielectric Strength(between shell and output): 1000V AC/1min 5mA. Leading Wire in Length: 1m. Open Size: 13mm x 13mm.
In stock
+
Add to wish list

US$8.33
This utilizes a RPR220 reflective photosensor module to detect color and distance.
Delivery within 2-3 weeks
+
Add to wish list

US$15.33
This consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow.
In stock
+
Add to wish list

US$4.97
Produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use.
In stock
+
Add to wish list

US$8.33
Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment
Delivery within 2-3 weeks
+
Add to wish list

US$3.43
The ingenious PCB design enables you to bend the LED to any position you want, which makes it easy to use it standalone, horizontal or Panel Mount.
Delivery within 2-3 weeks
+
Add to wish list