Our Brands

Robot Arms/Claws/Grippers

Newest Items First
15 Per Page
RACG-12 DIY 4 DOF Robot Wooden Manipulator Arm Kit with Clamp Claw for Arduino, Raspberry Pi
US$27.25
This is a D.I.Y .4 DOF Robot Wooden Manipulator Arm Kit with Clamp Claw for Arduino, Raspberry Pi   This is an economical 4-DOF robotic arm. Each joint...
In stock
+ −
Add to wish list
RACG-05 D.I.Y Acrylic Robot Arm Kit
US$13.42
This Robot Arm kit does not include servos or microcontrollers.
In stock
+ −
Add to wish list
D.I.Y Acrylic Robot Claw (Frame Pack - Servo not included)
US$12.53
A very inexpensive gripper that allows for experimentation. Highly recommened for arduino starter kit users to build on as an add-on for future projects. Servo sold seperately (SG92R)!
In stock
+ −
Add to wish list
4-DOF Metal Robot Arm Kit for Raspberry Pi, Bluetooth+WiFi version
US$81.85
This 4-DOF Metal Robot Arm Kit for Raspberry Pi contains all the components required to build your own robotic arm controlled with your smart phone using bluetooth or WIFI.
In stock
+ −
Add to wish list
4-DOF micro:bit Metal Robot Arm Kit for micro:bit, Bluetooth
US$81.67
This starter robotic arm kit for micro:bit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to control the arm by smart phone through Bluetooth connection.
In stock
+ −
Add to wish list
6DOF Arduino METAL ROBOTIC ARM
US$159.95
This is ABRA’s very own 6DOF Robotic ARM Educational Kit. You can run this using any microcontrollers and it’s easy with Arduino boards. This robotic arm delivers fast, accurate, and repeatable movement. The robot features are: base rotation, waist, single plane shoulder, elbow, wrist motion and a functional gripper. The robotic arm is an affordable system with a time tested rock solid design that will last and last. Everything needed to assemble is there, including the motors required for the robot to function. Included with this kit is a printed color manual with instructions and also coding for specific applications.
In stock
+ −
Add to wish list
ROB-13178 Parallel Gripper Kit A - Channel Mount
US$24.95
This is the Parallel Gripper Kit A, a simple and durable robotics kit that is great for “getting a grip” on pretty much any robotics project! Designed for use with any standard size Hitec servo with a 24T spline, the gripper kit is easy to assemble and requires only a Phillips Head Screwdriver. This gripper is capable of opening, in a parallel motion, 2.8" wide max, has an overall body dimension of 5" long by 4.1" wide, and offers both 0.77" and 1.5" hub patterns for easy mounting on Actobotics components.
Delivery within 2-3 weeks
+ −
Add to wish list
RACG-21 D.I.Y 6 DOF Mechanical Arm Frame with Gripper Claw
US$54.95
This beautiful product is a kit that comes packed with one mechanical gripper claw, 9 aluminium brackets painted in black that provide when assembled 6 degree of movement and required screws, hex nuts, coupling gears and one Philips screwdriver. Depending on your project this unit is a dream come true at an affordable pricing. This product sits comfortably in-between RACG-01 and SF-ROLLARM in terms of pricing, quality and features. The claw opens to about 2" and depending on the servo motor used, it can pick up some relatively heavy objects. The new spring-loaded clutch helps protect your servo gears from damage and also increases the gearing to 2:1, allowing the servo to act over its entire range and provide more gripping power!
In stock
+ −
Add to wish list
RACG-09 Mini DIY Acrylic Claw Arm for Arduino
US$34.94
This is a robotic claw arm set ideal for the Arduino board. Build your very own claw arm and control it using your Arduino. You can fit up to four 9g servo motors allowing it to lift objects that weigh up to 10g. The motors give the arm a reasonable amount of mobility (up to 4 axis of rotation including the claw grip). You can rotate the base, extend the arm out and lift objects up after gripping them with the claw. Be aware, however that it does not come with any servo motors, Arduino boards or any additional hardware. This product only includes the acrylic set and all screws needed to assemble. We highly recommend assembling this arm with the motors.
In stock
+ −
Add to wish list
RACG-01 Mechanical Claw Gripper
US$12.53
This mechanical claw is made from metal and is pretty heavy-duty. It is great for robotic projects. The mechanism features brass sleeves in the joints which make them more rigid and less likely to come loose. The claw opens to about 2" and depending on the servo motor used, it can pick up some relatively heavy objects. The new spring-loaded clutch helps protect your servo gears from damage and also increases the gearing to 2:1, allowing the servo to act over its entire range and provide more gripping power!
In stock
+ −
Add to wish list
SF-ROLLARM Robotic Arm Kit 4-Axis for Arduino
US$110.59
The Rollarm Kit for Arduino is designed for mass hobbyists to learn robot arm control. With the open source MCU Arduino UNO and a servo expansion board, the robot arm is easy to use and full of fun. You can control its four axes by the 4 potentiometers on the handle, as well as make them move on your computer. In addition, it can memorize the movements it's made and repeat again and again, making it a great tool for repeated tasks.
In stock
+ −
Add to wish list
SF-ROLLPAW Standard Gripper Kit Rollpaw for Robotic Arm Rollarm DIY Robot Arduino Uno
US$30.79
The Rollpaw kit is a simple solution for projects that need small grippers. It is driven by two 9g SunFounder servos: one to control the jaws to open and close, and the other to control the rotating of the paw. When the jaws is fully stretched, the maximum distance is 60mm, which means it can grip an object with a 60-mm diameter. The joints of the two jaws are all connected with self-locking nuts, so that they would not fall off easily during the rotating and keep the paw "safe and sound". The Rollpaw is easy to assemble and use with the code provided.
In stock
+ −
Add to wish list
ROB-13176 Micro Gripper Kit A - Straight Mount
US$9.73
This Micro Gripper is capable of opening 2.75" wide max, has an overall body length of 1.7" long with a 1.3" wide servo housing body, and offers three 6-32 mounting thru-holes along the edges of the servo housing.
In stock
+ −
Add to wish list
ROB-13177 Micro Gripper Kit B - Hub Mount
US$9.73
This Micro Gripper is capable of opening 2.75" wide max, has an overall body dimension of 2.6" long by 1.3" wide, and offers the 0.77" hub pattern for easy mounting on Actobotics components.
In stock
+ −
Add to wish list