Spectacle Sparkfun

CA$3.00
This simple 24AWG wire is terminated with a male JST connector at one end and a male JST-SM connector at the other. Each wire is a foot long and is capable of supporting a high voltage of 300VDC. These make for great connectors with WS2812 light projects! We use these cables almost exclusively on our Spectacle Light Board (DEV-14052) to hook up addressable LED strips (COM-12025), but that doesn’t mean you can’t find a different use for them! Dimensions: 1ft (0.3m) length.
In stock
+
Add to wish list

CA$3.00
These simple 24AWG wires are terminated with a female insulated spade connector at one end and a braided wire lead at the other. Each wire is 3 feet long and is capable of supporting a high voltage of 300VDC. Each order comes in a pack of two! We use these cables almost exclusively on our Spectacle Button Board (DEV-14044), but that doesn’t mean you can’t find a different use for them! Dimensions: 3ft (0.9m) length.
In stock
+
Add to wish list

CA$19.95
The Spectacle Light Board allows you to add some fairly complex lighting effects to your Spectacle projects in a streamlined manner. Each has connections for you to add addressable LEDs as well as an external power connector. Designed to make it easy to add relatively complex lighting effects to your Spectacle projects, the Spectacle Light Board integrates with the rest of the Spectacle ecosystem to allow you to control lighting effects with ease and comfort. The Light Board is equipped with two 3.5mm TRRS jacks for Spectacle control signals from a Director Board (DEV-13912). The one labeled “In” should be plugged into a board that is closer to the Director Board than the Light Board is, or into the Director Board itself. Make sure to pay attention to the directionality of the jacks, as they will dictate how your Spectacle modules speak with one another and with the Director Board. As with every other Spectacle module, you will need the Director Board to operate any Spectacle project.
In stock
+
Add to wish list

CA$18.93
The Spectacle Button Board allows you to add input from buttons, switches or other contact-type sensing devices to your Spectacle projects. This is the largest board in the Spectacle line due to its total of nine signal inputs, allowing for a large number of connections to a single module. Designed to bring simple signals from the world into your Spectacle projects, the Button Board provides input for any of your Spectacle projects! The Button Board is equipped with two 3.5mm TRRS jacks for Spectacle control signals from a Director Board (DEV-13912). The one labeled “In” should be plugged into a board that is closer to the Director Board than the Button Board is, or into the Director Board itself. Make sure to pay attention to the directionality of the jacks, as they will dictate how your Spectacle modules speak with one another and with the Director Board. As with every other Spectacle module, you will need the Director Board to operate any Spectacle project.
In stock
+
Add to wish list

CA$19.93
The Spectacle Audio Board allows you to add sound from a microSD card to your Spectacle projects. Each board accepts a microSD card with sounds in .ogg format, and has a 1/8" (3.5mm) audio jack line-level output ready to be amplified. It is important to know that the files used by the Spectacle Audio Board must be in OGG Vorbis format. This free codec has a higher compression ratio than MP3 and, more importantly, can be used without paying a licensing fee to any third-party organization. We use the free, open source program Audacity to convert from whatever the file’s current format is to OGG Vorbis. The Audio Board is equipped with three 3.5mm TRRS jacks: two for Spectacle control signals from a Director Board (DEV-13912) and one for an amplified speaker. The one labeled “In” should be plugged into a board that is closer to the Director Board than the Audio Board is, or into the Director Board itself. Make sure to pay attention to the directionality of the jacks, as they will dictate how your Spectacle modules speak with one another and with the Director Board. As with every other Spectacle module, you will need the Director Board to operate any Spectacle project.
In stock
+
Add to wish list

CA$27.92
The Spectacle Inertia Board makes it easy to sense motion or orientation with a Spectacle project. The Spectacle Inertia Board is designed to allow your Spectacle to detect whether it is moving or stationary, or whether it is under acceleration. At the heart of each Inertia Board is the trustworthy ADXL345 triple-axis MEMS accelerometer. The ADXL345 is a perfect fit for your Spectacle project when it comes to all things Inertia! The Inertia Board is equipped with two 3.5mm TRRS jacks for Spectacle control signals from a Director Board (DEV-13912). The one labeled “In” should be plugged into a board that is closer to the Director Board than the Inertia Board is, or into the Director Board itself. Make sure to pay attention to the directionality of the jacks, as they will dictate how your Spectacle modules speak with one another and with the Director Board. As with every other Spectacle module, you will need the Director Board to operate any Spectacle project.
In stock
+
Add to wish list

CA$38.38
Each Director Board features two 1/8" (3.5mm) jacks for Spectacle control signals. Plugging one TRRS cable into the headphone jack on your programming device and the other end into the “Program” jack on the Director Board will send commands into the reliable SAMD21 microcontroller at the board’s core. All you need to do then is plug another TRRS cable into the “Direct” jack on the Director Board and the other end of it into the “In” jack on another Spectacle board, and you are set! Make sure to pay attention to the directionality of the jacks, as they will dictate how your other Spectacle modules speak with the Director Board.
In stock
+
Add to wish list