Our Brands

AVR

Newest Items First
15 Per Page
PGM-AVR-XP2, USB AVRISP XPII, AVR Programmer
US$36.17
AVR ISP Programmer, compatible with AT AVRISP mkII from ATMEL. A professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGA. Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versions).
In stock
+ −
Add to wish list
3172-POLOLU USB AVR Programmer v2.1
US$27.25
This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our A-Star 328PB Micro, Orangutan robot controllers, and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software, and it supports devices running at either 3.3 V or 5 V. The programmer also features a TTL-level serial port, enabling general-purpose serial communication for debugging or programming microcontrollers with a serial bootloader. An ISP cable and a 1×6 double-sided male header are included with this fully-assembled programmer.
In stock
+ −
Add to wish list
WAVE-14224 USB AVRISP CH, AVR Programmer
US$30.73
Features: Resolution: Using the same MCU and core circuit as AT AVRISP, easy to use, stable and reliable. Based on ATMEL official STK500 firmware, identified as AVRISP/STK500 in AVRStudio, high speed programming. Standard ISP_6PIN connector. CH340G USB to UART converter, supports most popular OS, including WIN10, more stable, faster programming. Supports AVR Studio 4/5/6/7. Supports 0~3.6864MHz frequency output (via the two through holes on the backside, round=GND, square=PCLK, frequency is configurable by software).
In stock
+ −
Add to wish list
3170-POLOLU USB AVR Programmer v2
US$13.30
This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software, and it supports devices running at either 3.3 V or 5 V.
In stock
+ −
Add to wish list
WAVE-150 USB AVRISP XPII, AVR Programmer
US$53.19
AVR ISP Programmer, compatible with AT AVRISP mkII from ATMEL. A professional In-System Programmer. Supports all AVR devices with ISP or PDI interface, including XMEGA. Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versions).
In stock
+ −
Add to wish list
PGM-AVR-15 USBASP/USBISP AVR Programmer
US$13.99

Small generic AVR programmer encased in hard plastic, with a 10-pin cable included. Use USBasp in arduino to program your controller. Supports 3.3V and 5V (you have to open up the case to flip a switch). Support for AVRDude from version 5.2 onwards. Support for Linux, Mac OS X and Windows. Maximum write speed: 5KB/sec.

In stock
+ −
Add to wish list
DFR0360 XSP - Arduino Programmer
US$28.75
XSP Programmer is designed for Arduino/AVR device. It is a driver free programmer, supporting Arduino/AVR ISP and FTDI programming. It could provide both 5V and 3.3V power output or self-adaption power output(OFF mode). Support Xbee socket and auto-match ISP clock frequency.
In stock
+ −
Add to wish list
PGM-AVR-10 AVR USBtiny programmer
US$17.97
This premade board acts like a AVR programmer and uses SPI Interface. Works with avrdude (cmd) or avrdudess (GUI) and AVRStudio-compatible. You can flash firmwares using this tiny programmer or bitbang commands to avr chipsets.
In stock
+ −
Add to wish list
PGM-AVR-5 AVR USBASP Programmer
US$10.32
This programmer is based on Thomas Fischl’s USBasp design and connects your computer’s USB port to your microprocessor using SPI. This device is supported in AVRDude version 5.2 and onwards, Allows you to read/write to any atmel based microprocessors. Works in windows 7/8/10, Mac and Linux.
In stock
+ −
Add to wish list
PGM-11801 Tiny AVR Programmer
PGM-11801 Tiny AVR Programmer
US$28.06
This plugs directly into your USB port and provides a programming socket for the ATTiny45 and 85. Just slot an ATtiny into the socket, plug the programmer into your USB port and start up the Arduino IDE.
Delivery within 2-3 weeks
+ −
Add to wish list
1465-ADA 6-pin AVR ISP Breadboard Adapter Mini Kit
1465-ADA 6-pin AVR ISP Breadboard Adapter Mini Kit
US$2.02
A simple breakout, 2x3 in the center, two 1x3's on the side. Plugs into any breadboard for neat wiring (in both nifty and clean senses of the word). Comes with a quality mini PCB, a 2x3 pin header and a small stick of 0.1" header.
In stock
+ −
Add to wish list
1300-POLOLU USB AVR Programmer
1300-POLOLU USB AVR Programmer
US$27.93
This device is a programmer for AVR-based controllers, such as the Pololu Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software.
In stock
+ −
Add to wish list
174 Barebones AVR dev. board
174 Barebones AVR dev. board
US$21.00

This breakout AVR board is a prototype design with minimum components. We took the business-card-sized AVR target board from Evil Mad Scientist Laboratories and added a few components to make an AVR dev board that has only the bare minimums!

In stock
+ −
Add to wish list