Our Brands

Particle

1 2
Newest Items First
15 Per Page
PHOTON 2 Particle IoT WIFI Development Board with headers
US$31.80
Get started with the Photon 2, and access the Particle IoT Platform-as-a-Service with a fully-featured development sandbox that includes support for up to 100 devices. Leverage our easy-to-use developer tools & resources including CLIs, IDEs, APIs, SDKs, tested firmware libraries, tutorials, and our seamless device setup process for unparalleled development.
In stock
+ −
Add to wish list
ARGON-KIT Particle Argon Kit
US$63.65
The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. The Argon is great for connecting projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints. It's everything you love about the Photon, with more features like Bluetooth and mesh networking.
In stock
+ −
Add to wish list
Xenon
US$24.95
The Xenon is a low cost mesh-enabled development board that can act as either an endpoint or repeater within a Particle Mesh network. The Xenon is mesh only and designed to function as the endpoint of your IoT network. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. The Xenon is best for connecting sensors, motors, pumps, valves, and points of data-interest. Pair it with an Argon or Boron gateway to get all that great data into the Device Cloud.
In stock
+ −
Add to wish list
Argon
US$54.55
The Argon is a powerful Wi-Fi enabled development board that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. The Argon is great for connecting existing projects to the Particle Device Cloud or as a gateway to connect an entire group of local endpoints.
In stock
+ −
Add to wish list
Particle Debugger
US$28.00
The Particle Debugger gives you the power of professional debugging at a fraction of the cost. Using this accessory, you’ll be able to program Particle mesh-ready hardware over common interfaces like JTAG and SWD, using open source tools like GDB. Supports the open source CMSIS-DAP specification and DAPLink firmware developed by ARM. Comes with one JTAG ribbon cable.
In stock
+ −
Add to wish list
Particle Ethernet FeatherWing
US$28.00
The Ethernet FeatherWing is the fastest way to add wired connectivity to your Argon, Boron, or Xenon and turns any Particle Mesh developer kit into an Ethernet gateway. Based on the WIZnet W5500 chip, this side-by-side FeatherWing maintains great RF performance even while adding Ethernet connectivity to any Particle Mesh device.
In stock
+ −
Add to wish list
Particle FeatherWing Tripler
US$13.94
Perfect for any prototyping project, the Tripler provides space to add-on up to two FeatherWing accessories without any stacking header needs. Compatible with the newest generation of Particle developer kits (Particle Mesh). The Tripler has three breakouts for each pin on a Feather, as well as plain grid proto holes. In addition, three sets of pins are cross connected with a full strip of connected pads for GND and 3.3V.
In stock
+ −
Add to wish list
PRT-14322 Photon Stackable Header - 12 Pin
US$1.25
These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header with pins spaced at 0.1". If you don’t have a Particle Photon, that’s fine! These headers will work in any other situation when you need a 12-pin header solution!
In stock
+ −
Add to wish list
PRT-14321 Photon Header - 12 Pin Female
US$1.25
These standard female headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 female header with pins that are spaced by 0.1". If you don’t have a Particle Photon, that’s fine! These headers will work in any other situation when you need a 12-pin header solution!
In stock
+ −
Add to wish list
SNSRKIT3G260 Sensor Kit w/ Electron + Data, 3G (Americas/Aus)
US$209.93
Quantify the world! The Sensor Kit is a curated mix of awesome sensors and electrical components specifically selected by the engineers on the Particle Team. If you want to measure temperature, sense loudness, measure distances, capture motion, or detect noxious gases, the Sensor Kit has you covered. Whether you’re building a connected robot or measuring the world around you, the Sensor Kit is the place to start. The Sensor Kit comes with a Particle SIM card with service in more than 100 countries worldwide, and includes 3 months of Particle's 1MB monthly data plan for IoT devices. All Electrons also include Particle's development tools, access to a cloud platform with messaging, and a SIM dashboard for managing and updating your new connected hardware. The Electron is a GSM-only device, and does not support CDMA networks.
In stock
+ −
Add to wish list
DEV-13630 SparkFun Photon Weather Shield
US$46.13
The SparkFun Photon Weather Shield is an easy to use add-on board that grants you access to barometric pressure, relative humidity, and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and soil readings!
In stock
+ −
Add to wish list
DEV-13626 SparkFun Photon Battery Shield
US$22.74
The SparkFun Photon Battery Shield provides you with an easy way to power your Photon module with a Lithium polymer battery. Not only can the Battery Shield power you Photon but you will also be able to charge a LiPo bettery through it as well.
In stock
+ −
Add to wish list
DEV-13629 SparkFun Photon IMU Shield
US$36.33
This is the SparkFun Photon IMU Shield, a versatile motion-sensing add-on board for your Photon device. Each IMU shield is equipped with an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. That’s right, 9 degrees of freedom (9DOF) from a single IC!
In stock
+ −
Add to wish list
DEV-13628 SparkFun Photon Micro OLED Shield
US$32.13
The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there.
In stock
+ −
Add to wish list
DEV-13598 SparkFun Photon ProtoShield
US$3.50
This ProtoShield mates easily with your Photon module and provides a small soldering area and separated power and I2C hook-ups. With the SparkFun Photon ProtoShield you have the control over what kind of project you design for your Photon.
In stock
+ −
Add to wish list
1 2