Our Brands

ARM Development

Newest Items First
15 Per Page
WAVE-25868 Luckfox Pico Mini RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors (Mini B with 128MB Flash with pre-soldered headers)
US$17.24
Luckfox Pico Mini is a cost-effective Linux micro development board, based on the Rockchip RV1103 chip to provide a simple and efficient development platform for developers; Support a variety of interfaces including MIPI CSI, GPIO, UART, SPI, I2C, USB, etc., which is convenient for developing and debugging quickly.
In stock
+ −
Add to wish list
STM32F030C6T6, Arm Cortex-M3 STM32 Development Board Module with 32 Kbytes of Flash memory, 72 MHz CPU
US$7.96
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
In stock
+ −
Add to wish list
STM32F030C8T6, Arm Cortex-M0 STM32 Development Board Module with 64 Kbytes of Flash memory, 48 MHz CPU
US$8.87
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
Delivery within 2-3 weeks
+ −
Add to wish list
NUCLEO-F303RE ARM STM32 Nucleo Development Board
US$27.25
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.
Delivery within 2-3 weeks
+ −
Add to wish list
STM32F411CEU6, STM32F411 Development Board
US$17.97
The STM32F411CEU6 is a development board offering high-speed embedded memory and an extensive range of I/Os. It is geared towards people with STM32 development experience.
 
In stock
+ −
Add to wish list
DFR0942, ART-Pi STM32H750 Cortex-M7 Development Board
US$105.00
The DFR0942 is an open-source cortex development board. It's equipped with a high-performance processor and core. The development board also carries with it an array of peripherals and expansion ports.
Delivery within 2-3 weeks
+ −
Add to wish list
DFR0864, STM32F411 "BlackPill" Development Board
US$29.89
The DFR0864 is a development board offering high-speed embedded memory and an extensive range of I/Os. It is geared towards people with STM32 development experience.
 
In stock
+ −
Add to wish list
ST25R3911B NFC Development Kit, STM32 Controller, Multi Protocols
US$30.99
This is an NFC development kit based on ST25R3911B, with STM32F103R controller, OLED display, user buttons, and common used interfaces. It is your ideal choice for learning and developing NFC applications. Multiple NFC protocols are supported by the kit, with up to 1.4w output power, and low-power capacitive wakeup function.
In stock
+ −
Add to wish list
STM32 Arm Cortex M4 Development Board
US$36.35

This board features a genuine Arm® Cortex®-M processor that is 32-bits. The board can be referred as the F4 board as it is based on STM32F4.

In stock
+ −
Add to wish list
STM8S103F3P6 High Performance Development Board
US$5.59
ST’s STM8S series of mainstream 8-bit microcontrollers covers a large variety of applications in the industrial, consumer and computer markets, particularly where large volumes are concerned. Based on the STM8 proprietary core, the STM8S series benefits from ST's 130 nm technology and advanced core architecture performing up to 20 MIPS at 24 MHz. In addition to embedded EEPROM and RC oscillators, the rich number of I/Os offered and the performance of its embedded peripherals is recognized as a differentiating key point versus competition.
In stock
+ −
Add to wish list
STM32F030F4P6 Cortex-M0 From STLINK (STM32F030F4P6) Development Board
US$9.05
This board is a STM32F030F4P6 Development Board also known as the Cortex-M0. It is a ARM 32-bit Cortex-M0 CPU with a frequency up to 48 MHz and features a high-speed embedded memory. As a minimal ready-to-run system, this board has a Micro USB power supply interface, ISP/SWD programming/debugging interface, boot mode selection and etc., It also comes with some headers and requires some soldering to get them inserted on.
In stock
+ −
Add to wish list
STM32F103C8 V2 ARM Microcontroller Board STM32F103C8T6
US$9.79
The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
In stock
+ −
Add to wish list
STM32F103C8T6 ARM STM32 Minimum System Development Board Module for Arduino
US$13.60
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
In stock
+ −
Add to wish list
2094-ADA JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
US$8.67
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful for using products like theJTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector.
In stock
+ −
Add to wish list