Our Brands

LED/ LCD/ Pixel Shields

1 2
Newest Items First
15 Per Page
144x168, 1.3inch Bicolor LCD with Embedded Memory, Low Power
US$25.19
This is a black/white bicolor LCD display module with embedded memory, 1.3inch diagonal, 144x168 resolution, communicating via SPI interface. It features lower power consumption compared to normal LCDs, and higher refresh rate compared to e-Papers without "ghosting" issue.
In stock
+ −
Add to wish list
WAVE-13992 128x128, General 1.5inch OLED display Module
US$17.97
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit grey level, with embedded controller, communicating via SPI or I2C interface.
Delivery within 2-3 weeks
+ −
Add to wish list
WAVE-13892 128x160, General 1.8inch LCD display Module
US$12.59
This is a general LCD display Module, 1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface.
In stock
+ −
Add to wish list
WAVE-13506 3.5inch Touch LCD Shield for Arduino
US$37.73
Features: Resistive touch screen TFT LCD, 3.5inch, 480x320 resolution. Standard Arduino interface, compatible with development boards like: Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO. Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control. PWM backlight control, allows to adjust the backlight to a comfortable level. Micro SD slot, provides an easy way to store photos for displaying. Controlled via SPI, only a few Arduino pins are used. Comes with STM32 and Arduino examples, convenient for porting.
In stock
+ −
Add to wish list
WAVE-13584 3.2inch Touch LCD Shield for Arduino
US$37.73
Features: Resistive touch screen TFT LCD, 3.2inch, 320x240 resolution. Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO. Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control. PWM backlight control, allows to adjust the backlight to a comfortable level. Micro SD slot, provides an easy way to store photos for displaying. Controlled via SPI, only a few Arduino pins are used. Comes with STM32 and Arduino examples, convenient for porting.
In stock
+ −
Add to wish list
WAVE-13587 4inch Touch LCD Shield for Arduino
US$42.54
Features: Resistive touch screen TFT LCD, 4inch, 480x320 resolution. Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO. Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control. PWM backlight control, allows to adjust the backlight to a comfortable level. Micro SD slot, provides an easy way to store photos for displaying. Controlled via SPI, only a few Arduino pins are used. Comes with STM32 and Arduino examples, convenient for porting.
In stock
+ −
Add to wish list
DFR0274 RGB LED Strip Driver Shield v1.0
US$19.50
Want to program your RGB LED strip to be a bit more "rhythmic" or "unpredictive"? This RGB LED Strip Shield contains all the components you need to build a super cool RGB (or other three channel) LED project with your Arduino. The shield has 3 outputs with pulse width modulation. Each can control any 12V load, at up to 3A. The shield has build-in IR receiver which allows the LED strip being controlled by an IR remote controller. A buildin fuse protects the LED strip from over current or any shortage by any reasons. It cares your hard work. This shield makes it possible to drive about 10 meter length RGB LED Strip with your Arduino processor, which almost require 10Amps(@12V) driving capability.
In stock
+ −
Add to wish list
DFR0374 LCD Keypad Shield V2.0 For Arduino
US$24.02
This product includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons. This product ensures consumer's convience especially when computer is not available. Menu selection and monitoring can be easily achieved by this product even for gaming, that means you can test or debug your project by displaying information on the LCD display. This function makes sure that the project runs well.
In stock
+ −
Add to wish list
DFR0382 LED Keypad Shield For Arduino
US$13.93
The LED Keypad Shield is an Arduino expansion shield with a 4 digit 8 segment digital tube display (common cathode). It has 5 buttons that can be used as menu select buttons or control buttons, using I2C to drive the digital tube for an easy user experience.
In stock
+ −
Add to wish list
WAVE-10684, 2.8 inch Arduino LCD Touch Screen
US$27.07
A 2.8 inch 320 x 240 resolution Resistive touch screen. Works with Arduino compatible microcontrollers. Comes with a Micro SD Card interface onboard and is controlled via SPI. Backlight is adjustable via program.
Delivery within 2-3 weeks
+ −
Add to wish list
VEL-KA06 LCD SHIELD FOR ARDUINO®
US$55.93
Features: For Hitachi HD44780 or compatible LCD's. Requires 1 Arduino UNO™ (not included). Stackable design: the shield can be stacked with other shields. Included: Negative Blue 20 x 4 Character LCD Module with White Side LED Backlight.
Delivery within 2-3 weeks
+ −
Add to wish list
IM120417023 IBRIDGE LITE
IM120417023 IBRIDGE LITE
US$12.59
This is a 3X3 key-pad shield with a 5110 Graphic LCD interface.
Delivery within 2-3 weeks
+ −
Add to wish list
ARD-1602-K 16x2 Parallel Port Character LCD and Keypad Shield for Arduino UNO and MEGA2560
US$8.39
This is a popular LCD Keypad shield for Arduino UNO and MEGA2560. It includes a 16x2 LCD display and 6 tactile push buttons. (SELECT, UP, DOWN, LEFT ,RIGHT and RST). The LCD shield features contrast adjustment and backlight. The design of this shield allows you to utilize the unused pins on your Arduino board for other purposes.
In stock
+ −
Add to wish list
DFR0287 LCD12864 Shield for Arduino
DFR0287 LCD12864 Shield for Arduino
US$41.93

This is compatible with most of Arduino controllers and supports English/Chinese/Picture display. With 5 analog extention pins and 8 digital pins, the LCD12864 Shield also integrates a 5-key joystick for controlling addtional functions, making it an ideal module for prototyping and interactive projects. 

In stock
+ −
Add to wish list
2.8" TFT Touch Shield for Arduino with Resistive Touch Screen
US$48.91
This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.
Delivery within 2-3 weeks
+ −
Add to wish list
1 2