Pololu

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23
US$29.90
The S9V11F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2 V and 16 V. (Note: it requires an input voltage of at least 3 V to start, but it can operate down to 2 V after startup.) Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The very compact (0.3″ × 0.45″) module has a typical efficiency of over 90% and can supply a typical output current of up to 1.5 A when the input voltage is around 5 V.
In stock
+
Add to wish list

US$52.55
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors. High efficiencies are maintained at light loads by dynamically changing the switching frequency, and an optional shutdown pin enables a low-power state with a current draw of a few hundred microamps.
Delivery within 2-3 weeks
+
Add to wish list

US$26.53
This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with internal resistances that independently change in response to the location and magnitude of an applied force. This allows a microcontroller with an analog-to-digital converter (ADC), such as an Arduino or A-Star, to easily determine where and how hard the strip is being pressed, enabling advanced touch-control user interfaces (like menu navigation) or sophisticated tactile sensors. The FSLP is effectively a force-sensing resistor (FSR) that can also simultaneously sense position.
Delivery within 2-3 weeks
+
Add to wish list

US$16.73
This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with internal resistances that independently change in response to the location and magnitude of an applied force. This allows a microcontroller with an analog-to-digital converter (ADC), such as an Arduino or A-Star, to easily determine where and how hard the strip is being pressed, enabling advanced touch-control user interfaces (like menu navigation) or sophisticated tactile sensors. The FSLP is effectively a force-sensing resistor (FSR) that can also simultaneously sense position.
In stock
+
Add to wish list

US$33.53
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Key specs at 6 V: 14 RPM and 40 mA with no load, 70 oz-in (5 kg-cm) and 0.36 A at stall. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Delivery within 2-3 weeks
+
Add to wish list

US$32.13
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 14 RPM and 40 mA with no load, 70 oz-in (5 kg-cm) and 0.36 A at stall. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Delivery within 2-3 weeks
+
Add to wish list

US$23.73
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Key specs at 6 V: 45 RPM and 40 mA with no load, 40 oz-in (2.9 kg-cm) and 0.36 A at stall.
Delivery within 2-3 weeks
+
Add to wish list

US$22.33
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 45 RPM and 40 mA with no load, 40 oz-in (2.9 kg-cm) and 0.36 A at stall.
In stock
+
Add to wish list

US$23.73
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Key specs at 6 V: 50 RPM and 40 mA with no load, 32 oz-in (2.3 kg-cm) and 0.36 A at stall.
Delivery within 2-3 weeks
+
Add to wish list

US$22.33
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 50 RPM and 40 mA with no load, 32 oz-in (2.3 kg-cm) and 0.36 A at stall.
In stock
+
Add to wish list

US$23.73
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Key specs at 6 V: 60 RPM and 40 mA with no load, 27 oz-in (1.9 kg-cm) and 0.36 A at stall.
Delivery within 2-3 weeks
+
Add to wish list

US$22.33
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 60 RPM and 40 mA with no load, 27 oz-in (1.9 kg-cm) and 0.36 A at stall.
In stock
+
Add to wish list

US$23.73
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Key specs at 6 V: 85 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.36 A at stall.
Delivery within 2-3 weeks
+
Add to wish list

US$22.33
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 85 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.36 A at stall.
Delivery within 2-3 weeks
+
Add to wish list

US$23.73
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. Key specs at 6 V: 120 RPM and 40 mA with no load, 12 oz-in (0.9 kg-cm) and 0.36 A at stall.
In stock
+
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 - 23