Our Brands

Pololu

2 - 16
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
18 - 31
Newest Items First
15 Per Page
2575-POLOLU 6V Step-Up/Step-Down Voltage Regulator S18V20F6
US$37.48
This powerful step-up/step-down regulator efficiently produces a fixed 6 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage.
In stock
+ −
Add to wish list
2599-POLOLU Magnetic Encoder Disc for Micro Metal Gearmotors, 12 CPR
US$0.97
These magnetic discs can be used with our micro metal gearmotors with extended motor shafts as part of a quadrature encoder system that offers 12 counts per revolution. Appropriate Hall Effect sensors, such as those in our magnetic encoder pair kits, are required to complete the system.
In stock
+ −
Add to wish list
3081-POLOLU Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible)
US$12.53
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions.
Delivery within 2-3 weeks
+ −
Add to wish list
2590-POLOLU Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V
US$13.58
Add quadrature encoders to your LP, MP, or HP micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 5 V.
In stock
+ −
Add to wish list
2591-POLOLU Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V
US$13.58
Add quadrature encoders to your LP, MP, or HP micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 3.3 V.
In stock
+ −
Add to wish list
2815-POLOLU Big MOSFET Slide Switch with Reverse Voltage Protection, HP
US$10.52
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 16 A at 4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital output of a microcontroller.
In stock
+ −
Add to wish list
2814-POLOLU Big MOSFET Slide Switch with Reverse Voltage Protection, MP
US$5.95
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 8 A at4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital output of a microcontroller.
In stock
+ −
Add to wish list
2813-POLOLU Big Pushbutton Power Switch with Reverse Voltage Protection, HP
US$11.10
The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off. Additional control inputs allow advanced applications such as automatic shutdown by the device being powered. This HP version operates from 4.5 V to 40 V and can deliver continuous currents up to around 16 A.
Delivery within 2-3 weeks
+ −
Add to wish list
2812-POLOLU Big Pushbutton Power Switch with Reverse Voltage Protection, MP
US$6.65
The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off. Additional control inputs allow advanced applications such as automatic shutdown by the device being powered. This MP version operates from 4.5 V to 40 V and can deliver continuous currents up to around 8 A.
In stock
+ −
Add to wish list
2739-POLOLU AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, and LPS25H Carrier)
US$52.42
The Pololu AltIMU-10 v5 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation. The board operates from 2.5 to 5.5 V and has a 0.1″ pin spacing.
In stock
+ −
Add to wish list
2991-POLOLU G2 High-Power Motor Driver 18v17
US$74.92
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
Delivery within 2-3 weeks
+ −
Add to wish list
2995-POLOLU G2 High-Power Motor Driver 24v21
US$83.94
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
Delivery within 2-3 weeks
+ −
Add to wish list
2994-POLOLU G2 High-Power Motor Driver 18v25
US$89.92
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
Delivery within 2-3 weeks
+ −
Add to wish list
2675-POLOLU Aluminum Scooter Wheel Adapter for 1/4″ Shaft
US$6.93
This two-part aluminum assembly mounts directly to 1/4 inch diameter motor output shafts like those on our NEMA 23 stepper motors and allows you to drive most scooter, skateboard, inline skate, and other common wheels that are compatible with popular 608 ball bearings.
In stock
+ −
Add to wish list
3272-POLOLU Scooter/Skate Wheel 70×25mm - Black
US$4.04
This black polyurethane scooter/skate wheel measures 70 mm in diameter and 25 mm in width and works with standard 608 bearings as well as our Aluminum Scooter Wheel Adapters, which allow these wheels to be used with an assortment of motors.
In stock
+ −
Add to wish list
2 - 16
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
18 - 31