Our Brands

Pololu

1 2 3 4 5 6 7 8 9 10 11 12 13 14
8 - 22
Newest Items First
15 Per Page
3172-POLOLU USB AVR Programmer v2.1
CA$29.95
This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our A-Star 328PB Micro, Orangutan robot controllers, and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software, and it supports devices running at either 3.3 V or 5 V. The programmer also features a TTL-level serial port, enabling general-purpose serial communication for debugging or programming microcontrollers with a serial bootloader. An ISP cable and a 1×6 double-sided male header are included with this fully-assembled programmer.
In stock
+ −
Add to wish list
2519-POLOLU Dual MAX14870 Motor Driver Shield for Arduino
CA$41.12
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great for higher-voltage motors and applications, and the shield can 1.7 A continuous (2.5 A peak) per motor. The shield can optionally be configured to power the Arduino from the same power supply as the motor driver, and the Arduino pin mappings can be customized (by cutting traces) if the defaults are not convenient.
Delivery within 2-3 weeks
+ −
Add to wish list
3758-POLOLU Dual MAX14870 Motor Driver for Raspberry Pi (Partial Kit)
CA$41.12
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its pair of integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great control option for small motors that run on a wide range of voltages. The board can deliver a continuous 1.7 A (2.5 A peak) per motor. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.
In stock
+ −
Add to wish list
2858-POLOLU 5V, 2.5A Step-Down Voltage Regulator D24V22F5
CA$32.88
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.5 A and features reverse voltage protection. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors. An optional shutdown pin enables a low-power state with a current draw of around 20 μA to 350 μA, depending on the input voltage, and a power-good output indicates when the regulator cannot adequately maintain the output voltage.
In stock
+ −
Add to wish list
356-POLOLU 8x2 Character LCD - Black Bezel (Parallel Interface)
CA$13.77
This compact 8 x 2 LCD is great for small microcontroller projects where you want more than just a blinking LED for feedback. This unit uses the standard HD44780 parallel interface and features a black bezel. This little 8-character, 2-line parallel liquid crystal display is a generic equivalent of the Optrex DMC-50448N-AAE-AD LCD. It uses the common HD44780 interface, so sample interface code is widely available for a variety of microcontrollers. This is the smallest package we know of for this familiar interface.
Delivery within 2-3 weeks
+ −
Add to wish list
1434-POLOLU Wheel 80×10mm Pair - White
CA$8.38
These white plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 80 mm (3.15″) in diameter. Six additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.
Delivery within 2-3 weeks
+ −
Add to wish list
1433-POLOLU Wheel 80×10mm Pair - Blue
CA$14.23
These blue plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 80 mm (3.15″) in diameter. Six additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.
In stock
+ −
Add to wish list
1432-POLOLU Wheel 80×10mm Pair - Yellow
CA$14.23
These yellow plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 80 mm (3.15″) in diameter. Six additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.
In stock
+ −
Add to wish list
1431-POLOLU Wheel 80×10mm Pair - Red
CA$14.23
These red plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 80 mm (3.15″) in diameter. Six additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.
In stock
+ −
Add to wish list
1430-POLOLU Wheel 80×10mm Pair - Black
CA$14.23
These black plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 80 mm (3.15″) in diameter. Six additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.
In stock
+ −
Add to wish list
1425-POLOLU Wheel 70×8mm Pair - Black
CA$13.07
These black plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 70 mm (2.75″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.
In stock
+ −
Add to wish list
3575-POLOLU Balboa 32U4 Balancing Robot Kit (No Motors or Wheels)
CA$114.22
Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U4 MCU, motor drivers, quadrature encoders, and a full IMU. This board also has the ability to interface with a Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled balancing robot. Motors and wheels are not included: choose your wheels and motors to personalize your robot. The Balboa 32U4 is a small, user-programmable balancing robot based on the Arduino-compatible ATmega32U4 AVR microcontroller and featuring two H-bridge motor drivers, quadrature encoders for closed-loop motor control, a full inertial measurement unit (3-axis accelerometer, gyro, and magnetometer) for estimating orientation and balancing, and an optional interface for connecting a Raspberry Pi to make a Raspberry Pi-controlled balancing robot.
Delivery within 2-3 weeks
+ −
Add to wish list
1881P Wires with Pre-crimped Terminals 5-Pack M-F 24" Brown
CA$6.91
These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54mm) connectors. These 24″ (60 cm) wires have brown insulation and ship in packs of 5.
In stock
+ −
Add to wish list
972-POLOLU 6-Conductor Ribbon Cable with IDC Connectors 12"
CA$4.54
This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins. This cable is well suited to serve as an AVR ISP programming cable and is included with our Orangutan USB Programmer, or it can simply serve as a custom cable for your electronics project.
In stock
+ −
Add to wish list
2713P Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)
CA$2.14
These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just the right height for mounting expansion boards with standard-size female headers, and they have 4mm-long M2.5 threads that are just the right size for the Raspberry Pi’s mounting holes. These standoffs are sold in packs of 4.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13 14
8 - 22