Our Brands

Pololu

1 2 3 4 5 6 7 8
2 - 16
Sort Alphabetically: Z to A
15 Per Page
Wires with Pre-Crimped Terminals 50-Piece 10-Color Assortment F-F 6"
CA$15.31
These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54mm) connectors. The assortment of 6″ (15 cm) wires includes five each of ten different colors.
In stock
+ −
Add to wish list
TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
CA$16.70
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 2 A peak).
In stock
+ −
Add to wish list
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
CA$19.69
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S249FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.6 A per phase continuously without a heat sink or forced air flow (up to 4.5 A peak).
In stock
+ −
Add to wish list
STSPIN820 Stepper Motor Driver Carrier (Header Pins Soldered)
CA$15.34
This version of our STSPIN820 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
In stock
+ −
Add to wish list
750-POLOLU Pushbutton Power Switch SV
Pushbutton Power Switch SV
CA$10.69

It is a patented design initially created for the POLOLU Orangutan Robot Controllers as an alternative to bulky mechanical switches.

In stock
+ −
Add to wish list
Pololu Wheel for Standard Servo Splines (25T, 5.8mm) - 90×10mm, Black, 2-Pack
CA$11.23
These black plastic wheels have silicone tires and measure 90 mm (3.54″) in diameter. They mount onto standard servo splines with 25 teeth and a 5.8 mm diameter, such as the splines on FEETECH’s FS5106R, and SpringRC’s SM-S4303R continuous rotation servos. This product is a pair of wheels.
Delivery within 2-3 weeks
+ −
Add to wish list
Pololu Wheel for Standard Servo Splines (25T, 5.8mm) - 70×8mm, Black, 2-Pack
CA$9.69
These black plastic wheels have silicone tires and measure 70 mm (2.75″) in diameter. They mount onto standard servo splines with 25 teeth and a 5.8 mm diameter, such as the splines on FEETECH’s FS5106R and SpringRC’s SM-S4303R continuous rotation servos. This product is a pair of wheels.
In stock
+ −
Add to wish list
Pololu Wheel for Micro Servo Splines (20T, 4.8mm) - 60×8mm, Black, 2-Pack
CA$8.73
These black plastic wheels have silicone tires and measure 60 mm (2.36″) in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm diameter, such as the splines on FEETECH’s FS90R micro continuous rotation servos and FT90R digital micro continuous rotation servos. This product is a pair of wheels.
In stock
+ −
Add to wish list
Pololu Wheel for Micro Servo Splines (20T, 4.8mm) - 40×7mm, Black, 2-Pack
CA$6.99
These black plastic wheels have silicone tires and measure 40 mm (1.57″) in diameter. They mount onto micro servo splines with 20 teeth and a 4.8 mm diameter, such as the splines on FEETECH’s FS90R micro continuous rotation servos and FT90R digital micro continuous rotation servos. This product is a pair of wheels.
In stock
+ −
Add to wish list
Pololu TB67S128FTG Stepper Motor Driver Carrier
CA$23.10
The Pololu TB67S128FTG Stepper Motor Driver Carrier breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and microstepping down to 1/128-step. In addition, it has the ability to dynamically select an optimal decay mode by monitoring the actual motor current, and it can automatically reduce the driving current below the full amount when the motor is lightly loaded to minimize power consumption and heat generation.
In stock
+ −
Add to wish list
MAX14870 Single Brushed DC Motor Driver Carrier
CA$24.75
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
In stock
+ −
Add to wish list
Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
CA$12.23
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
In stock
+ −
Add to wish list
Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
CA$12.23
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
In stock
+ −
Add to wish list
CP2102N USB-to-Serial Adapter Carrier
CA$14.92
This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge that provides access to all of its control signal pins and GPIO pins.
In stock
+ −
Add to wish list
Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (Individually Packaged)
CA$2.95
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8
2 - 16