Our Brands

Pololu

3 - 17
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
19 - 31
Newest Items First
15 Per Page
3275-POLOLU Scooter/Skate Wheel 84×24mm - Black
CA$5.38
This black polyurethane scooter/skate wheel measures 84 mm in diameter and 24 mm in width and works with standard 608 bearings as well as our Aluminum Scooter Wheel Adapters, which allow these wheels to be used with an assortment of motors.
In stock
+ −
Add to wish list
3278-POLOLU Scooter/Skate Wheel 100×24mm - Black
CA$6.75
This black polyurethane scooter/skate wheel measures 100 mm in diameter and 24 mm in width and works with standard 608 bearings as well as our Aluminum Scooter Wheel Adapters, which allow these wheels to be used with an assortment of motors.
In stock
+ −
Add to wish list
3281-POLOLU Scooter/Skate Wheel 144×29mm - Black
CA$12.82
This black polyurethane scooter/skate wheel measures 144 mm in diameter and 29 mm in width and works with standard 608 bearings as well as our Aluminum Scooter Wheel Adapters, which allow these wheels to be used with an assortment of motors.
In stock
+ −
Add to wish list
2738-POLOLU MinIMU-9 v5 Gyro, Accelerometer, and Compass (LSM6DS33 and LIS3MDL Carrier)
CA$49.36
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. An I²C interface accesses nine independent rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s absolute orientation.
In stock
+ −
Add to wish list
3170-POLOLU USB AVR Programmer v2
CA$14.62
This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software, and it supports devices running at either 3.3 V or 5 V.
In stock
+ −
Add to wish list
1079-POLOLU Universal Aluminum Mounting Hub for 3mm Shaft, #2-56 Holes (2-Pack)
CA$10.45
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #2-56 screws (not included).
In stock
+ −
Add to wish list
1081-POLOLU Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack)
CA$12.69
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two hubs, two #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #4-40 screws (not included).
Delivery within 2-3 weeks
+ −
Add to wish list
1996-POLOLU Universal Aluminum Mounting Hub for 3mm Shaft, M3 Holes (2-Pack)
CA$9.15
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 3 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).
In stock
+ −
Add to wish list
1997-POLOLU Universal Aluminum Mounting Hub for 4mm Shaft, M3 Holes (2-Pack)
CA$11.95
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).
In stock
+ −
Add to wish list
1998-POLOLU Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)
CA$12.95
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 5 mm diameter motor shafts. The set includes two hubs, two M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).
In stock
+ −
Add to wish list
1999-POLOLU Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
CA$13.95
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has six threaded mounting holes for M3 screws (not included).
In stock
+ −
Add to wish list
1994-POLOLU Universal Aluminum Mounting Hub for 1/4″ Shaft, M3 Holes (2-Pack)
CA$16.05
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has six threaded mounting holes for M3 screws (not included).
In stock
+ −
Add to wish list
1993-POLOLU Universal Aluminum Mounting Hub for 1/4″ Shaft, #4-40 Holes (2-Pack)
CA$13.95
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch diameter motor shafts. The set includes two hubs, four #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has six threaded mounting holes for #4-40 screws (not included).
In stock
+ −
Add to wish list
952-POLOLU Ball Caster with 1/2″ Plastic Ball
CA$3.95
This ball caster kit includes a black ABS housing, a 1/2″ diameter plastic ball, two spacers (1/16″ and 1/8″ thick), and two #2 screw sets. The total height of the ball caster, 0.53″, can be increased to about 0.7″ using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis.
In stock
+ −
Add to wish list
953-POLOLU Ball Caster with 1/2″ Metal Ball
CA$3.98
This ball caster kit includes a black ABS housing, a 1/2″ diameter metal ball, two spacers (1/16″ and 1/8″ thick), and two #2 screw sets. The total height of the ball caster, 0.53″, can be increased to about 0.7″ using the included spacers. The two included #2 screws can be used to mount the ball caster to your chassis.
In stock
+ −
Add to wish list
3 - 17
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
19 - 31