Tri-Color 10mm Common Cathode Water-clear LED - 4 Leads
This is a common cathode water-clear LED. Get unlimited color combinations by varying the voltages applied to the three separate RGB leads. This can easily be controlled using a microcontroller like the Arduino Uno.
|
Specification |
|||
|
Lens: |
Red |
Blue |
Green |
|
Peak Emission wavelength |
625nm |
467.5nm |
520nm |
|
Fwd Voltage (Typical/IF 20ma) |
2.0V |
3.5V |
3.5V |
|
Luminous Intensity @ 20ma |
800mcd |
900mcd |
4000mcd |
|
Max Cont. Forward Current (IF) |
30mA |
30mA |
30mA |
|
Viewing Angle |
30 Degrees |
30 Degrees |
30 Degrees |
|
Anode Pins (Left to Right) |
1 |
4 |
3 |
|
Common Cathode Pins (Longest Pin) |
2 |
Note: All parameters will vary on manufacture LEDs.
