LED-STRIP-09 Cool White LED Strip – 5M, 300 LED, Non-Waterproof

Price:
US$13.60
LED-STRIP-09
In stock
+
Add to wish list

LED-STRIP-09 Cool White LED Strip – 5M, 300 LED, Non-Waterproof

These LED strips are ultra bright, fun and glowy. There are 60 cool white LEDs per meter, and you can control the entire strip at once with any microcontroller and a power transistor. The way they are wired, you will need a 9-12VDC power supply and connect directly. If you want to dim the strip, use any NPN or N-channel MOSFET (although the big powerful kind is good for a large strip) and PWM the input. 

This strip is non-waterproof with a white background color. There's an adhesive strip on the back which should stick to most smooth surfaces. Great for architectural lighting (under-counter or under-cabinet), decorating your bicycle or car, making lamps, etc. You'll need a lot of power to light these up, we suggest a 12V 2A supply. To connect it to a power supply, pick up a 2.1mm female jack and wire it to the strip with some heat shrink. For portable use, we suggest a 8xAA battery holder.

You can cut this stuff pretty easily with wire cutters, there are cut-lines every 5cm (3 LEDs each). Solder to the 0.1" copper pads and you're good to go. 

These strips are sold by the 5 meter.

  • 8mm (0.20") wide, 3mm (0.12") thick, 50mm (2") long per segment
  • Non-waterproof IP44
  • Adhesive strip on back
  • Maximum 12V @ 60mA draw per strip segment
  • Max 1.8 Amps per meter (allLEDs lit full brightness)
  • 3 cool white LEDs per segment, 20 segments per meter, 300 LEDs total
  • LED color temp: 10,000K+
  • No microcontroller or chip controller ('analog' only!)

 

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov