MG Chemicals

1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 19
US$124.05

This is a mixture of two syringes of combined 15 grams of silver high conductivity epoxy with a quick drying and working time in 4 hours. The 8331S epoxy has many uses in the production, repair and assembly of electronics in microelectronics and optoelectronics.

Delivery within 2-3 weeks
+
Add to wish list

US$54.94

Features / Benefits: Lead free. Complies with RoHS. Exceeds the impurity requirements of J-Std-006. No Clean flux. 21 Gauge, 0.032" diameters. Excellent wettability. Hard non-conductive residues.

Delivery within 2-3 weeks
+
Add to wish list

US$104.93

Features / Benefits: Lead free. Complies with RoHS. Exceeds the impurity requirements of J-Std-006. No Clean flux. 21 Gauge, 0.032" diameters. Excellent wettability. Hard non-conductive residues.

In stock
+
Add to wish list

US$165.45

A white, two component, low viscosity potting compound that cures at room temperature to a soft pliable rubber. RTV 11 SILICONE, TWO PART (RATIO 200:1), WHITE, FLOWABLE FOR POTTING HIGH VOLTAGE APPLICATIONS, SS4155-P PRIMER REQUIRED.

 

Delivery within 2-3 weeks
+
Add to wish list

US$965.54

A clear, two component, low viscosity potting compound that cures at room temperature to a soft pliable rubber. RTV 12A SILICONE, TWO-PART (RATIO 20:1), CLEAR, LOW VISCOSITY, NO PRIMER REQUIRED, RTV12C CURING AGENT REQUIRED. Will cure in deep sections. The excellent electrical properties make it a candidate material for both high and low voltage electrical assemblies. Cushions against mechanical shock and vibration. The product comes complete with catalyst DBT. 

Delivery within 2-3 weeks
+
Add to wish list

US$206.00
This is a curing agent that comes in liquid form and for the RTV12A-1G. Offering higher performance qualities over conventional RTV silicones. 
Delivery within 2-3 weeks
+
Add to wish list

US$249.25

Excellent for potting and encapsulating electric motors and transformers. RTV 60 SILICONE, TWO-PART (RATIO 200:1), RED, POURABLE, HIGH TEMP., SS4155-1P PRIMER REQUIRED. Also used for fabrication of rubber parts and casting molds for low-melting point metals. Recommended for aerospace applications and as a thermal insulator. Excellent retention of elastomeric properties at temperatures from -54°C to 260°C (-65°F to 500°F) continuously, and up to 316°C (600°F) for short periods of time.

Delivery within 2-3 weeks
+
Add to wish list

US$183.40

Excellent for potting and encapsulating electric motors, transformers, and surge protection. RTV 88 SILICONE, TWO-PART (RATIO 200:1), RED, SPREADABLE PASTE, HIGH TEMP, SS4155-1P PRIMER REQUIRED. Can be used in aerospace applications such as sealing, bonding and quaketing on vertical or overhead surfaces. Composition is free of solvents and solvent odour. 

Delivery within 2-3 weeks
+
Add to wish list

US$21.14

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable.

Delivery within 2-3 weeks
+
Add to wish list

US$36.44

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable.

Delivery within 2-3 weeks
+
Add to wish list

US$21.14

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable.

Delivery within 2-3 weeks
+
Add to wish list

US$36.44

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA regulations apply.

Delivery within 2-3 weeks
+
Add to wish list

US$80.38

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. 

Delivery within 2-3 weeks
+
Add to wish list

US$231.34

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA regulations apply. 

Delivery within 2-3 weeks
+
Add to wish list

US$21.14

Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces.

Delivery within 2-3 weeks
+
Add to wish list
1 2 3 4 5 6 7 8 9 10 11 12 13
7 - 19