Our Brands

Makerfabs

Newest Items First
64 Per Page
MABSOIL Mabee_Capacitive Soil Moisture
US$4.50
A simple & cheap capacitive soil moisture sensor, measures the soil moisture level of plants by capacitive sensing.
Delivery within 2-3 weeks
+ −
Add to wish list
E32S319ST MaTouch_ESP32-S3 Parallel TFT with Touch 1.9" ST7789V2
US$45.27
This cute 1.9" display is for IoT applications, it features Wifi/ WiFi& Bluetooth 5.0 + BT mesh, with ESP32-S3R8 Dual-core LX7 microprocessor. This display can be powered by USB or directly by lipo battery, there on-board charger. Also there 2 expansion connectors, with UART/ADC. The colorful display resolution is 320*170, with capacitive touch, which could be a proper solution for IoT applications.
In stock
+ −
Add to wish list
E32S3128GC MaTouch_ESP32-S3 Round SPI TFT with Touch 1.28"
US$40.72
The ESP32-S3 round display with touch can be a great tool for your applications such as smartwatch. We selected the ESP32-S3 generation as the controller, with 16MB Flash and 8MB PSRAM, enough for most IOT applications; The round display is 240x240 resolution 1.28", colorful RGB, with capacitive touch, it communicates with ESP32 with SPI interface, so there enough GPIO left for expansion applications.
In stock
+ −
Add to wish list
MakePython ESP32 with WROOM
US$24.50

MakePython ESP32 is a powerful, generic Wifi+ BLE MCU module target to MicroPython learners & developers. It is true “breadboard compatible”, with the very detailed pins explanation, it is easy to learn& use. The MakePython ESP32 has 2 optional for users: WROOM(NO PSRAM) and WROVER(8MB PSRAM).

In stock
+ −
Add to wish list
LED-MATRIX-8X32, WS2812B RGB LED 8x32 Display, Flexible
US$26.16
The LED-MATRIX-64A is a flexible RGB LED 8x8 Display consisting of a WS2812B RGB LED.
 
In stock
+ −
Add to wish list
LED-MATRIX-64A, WS2812B RGB LED 8x8 Display, Flexible
US$22.52
The LED-MATRIX-64A is a flexible RGB LED 8x8 Display consisting of a WS2812B RGB LED.
 
In stock
+ −
Add to wish list
LOACDI01 Lora AC Dimmer, 915MHz
US$49.82
An AC Dimmer is used to control the AC cycle. Normally, a dimmer is used to turning the power ON/OFF for lamps or heating elements, it can also be used in fans, pumps, air cleaners, etc. Makerfabs Lora AC Dimmer chopper circuit is based on Triac BT139, and zero-cross checking circuit, it detects the zero-cross points and then the Triac controlled to chop the AC. Besides, to avoid the problem of AC can not be totally shunted off with Triac, a relay is implemented to make the AC totally On/Off. On-board AC/DC module implemented, so no external power supply needed, suitable for field applications.
In stock
+ −
Add to wish list
OAC808GPS35 Maduino Zero SIM808 GPS Tracker V3.5
US$36.17
This V3.5 is the Newest Version of the Maduino Zero SIM808 GPS Tracker. Maduino Zero SIM808 GPS Tracker is an IoT (Internet of things) Solution based on the 32-bit Atmel’s SAMD21 MCU and GPRS/GSM GPS/Bluetooth module SIM808. It integrates a micro Controller ATSAMD21G18, SIM808, power management, and storage, to make the SIM808 GPS Tracker ready for a real project for IoT projects such as smart-home, outdoor monitoring, shared bicycle, etc. The Maduino Zero SIM808 GPS Tracker based on the Arduino, users can program it with Arduino IDE, which is very easy especially suit for the none-programmers.
In stock
+ −
Add to wish list
MAPLC Maduino Power-Line Communication (PLC)
US$53.46
Power-line communication (PLC) carries data on AC or DC wires. It works by adding a modulated carrier signal to the wiring system. the power distribution system was originally intended for the transmission of AC power at typical frequencies of 50 or 60 Hz, it has only a limited ability to carry higher frequencies, but for some applications such as the sensor monitoring in smart-home, that’s enough.
In stock
+ −
Add to wish list
MAIGSRM Industrial-grade Soil Remote Monitor Sensor, 915MHz
US$90.77
This Industry-grade soil remote monitor intends for these applications of agriculture, it is mainly composed of 2 parts: 1. Remote monitor station with RS485: developed by Makerfabs, it converts the RS485 signal, which is usually used in agricultural field applications, to wireless connections WIFI (if there is) or Lora, or Bluetooth. 2. Industrial-grade Soil Sensor: unlike some other maker-level soil sensors that only output analog voltage that reflects the soil status/changes but not the absolute value, this sensor measures the soil parameters such Temperature/Moisture/PH/Nitrogen/ Phosphorus/Potassium.., with calculated true output, so users can get to know the real soil parameters.
In stock
+ −
Add to wish list
OHDLTS Lora TDS (Total Dissolved Solids) Sensor, 915MHz
US$40.72
Makerfabs Lora TDS sensor monitors the water status, includes TDS/ temperature, and send the data remotely via Lora, to create a local Lora network, so users can easily create multiple TDS node and process/display them in one Lora server, suitable for applications that need multiple TDS monitor.
In stock
+ −
Add to wish list
ESP32 UWB (Ultra Wideband) WROVER
US$68.02
Ultra-wideband (UWB) is a short-range, wireless communication protocol that operates through radio waves, enables secure reliable ranging and precision sensing, creating a new dimension of spatial context for wireless devices. Makerfabs ESP32 UWB module is based on DW1000, it acts like a continuously scanning radar, that precisely locks onto another device (called Anchor) and communicates with it, thus calculating its own location. Once the device is near another UWB device, the devices start “ranging.” Ranging refers to calculating the time of flight (ToF) between devices: the roundtrip time of challenge/response packets.
Delivery within 2-3 weeks
+ −
Add to wish list
OHMZ4G7600 Maduino Zero 4G LTE (SIM7600A-H, for North America) - 4G Frequency Band
US$113.52
This Maduino Zero 4G LTE module uses the SIMCOM7600(E/A）CAT4 module, to help Makers to achieve the 4G connection easily. Besides, this module can be a fully 4G access to your computer/PI, and also for telephone/SMS...
Delivery within 2-3 weeks
+ −
Add to wish list
LR20IL Lora Relay 30A 915MHz
US$22.52
This 30A Lora Relay is a relay module that could be controlled by Lora, with max current 30A/240V. Based on RFM98W, it supports a max of 4~5 km Lora communication.
In stock
+ −
Add to wish list
OAC915MLR Maduino Lora Radio, 915MHz
US$27.07
This is a mainboard based on the ATmega328 microchip and Lora Module designed for ultra-long-range, high interference immunity and low rate data transfer. Perfect for IoT projects.
In stock
+ −
Add to wish list
OPES32A9G WIFI+BLE+GPRS+GPS Solution based ESP32 and AI-Thinker A9G
US$35.26
This is an MCU module that allows you to create Wifi/GPRS/GPS/BLE connections with your projects by combining an ESP32 and an A9G shield.
In stock
+ −
Add to wish list
LSMS092D Lora Temperature/ Humidity/ Soil Moisture Sensor 915mhz
US$22.50
The Lora soil moisture sensor is based on Atmel's Atmega328P, it collects local air temperature/ humidity with sensor AHT10, and detect the soil humidity with capacitor-humility measurement solution with 555, and transmit the local environment data to the gateway, with Lora communication, suit for applications for smart-farm, irrigation, agriculture, etc.
In stock
+ −
Add to wish list
OPHMALORA, Maduino Zero LoRaWAN
US$31.80
The OPHMALORA is a module that allows you to connect your projects wireless to the internet in regional, national or global networks with the LoRaWAN networking protocol.
In stock
+ −
Add to wish list
LED-MATRIX-256, WS2812B RGB LED 16x16 Display
US$27.25
The LED-MATRIX-256 is a flexible RGB LED 16x16 Display consisting of a WS2812B RGB LED.
 
In stock
+ −
Add to wish list
MABMPU6050, Mabee_6Aixs IMU MPU6050
US$9.78
The MABMPU6050 is a module with a 3-Axis digital accelerometer and 3-Axis gyroscope, suitable for common motion capturing of acceleration and Orientation.
Delivery within 2-3 weeks
+ −
Add to wish list
MABRELAY, Mabee_Relay 10A
US$4.05
The MABRELAY is a relay module able to handle switching voltages on and off up to 250V at 10A
In stock
+ −
Add to wish list
MABWIFI, Mabee_Serial WiFi
US$5.41
The MABWIFI is a breakout board based on an ESP-12S chip, that allows you to integrate wireless connections into your projects.
In stock
+ −
Add to wish list
H-Bridge Motor Shield
US$25.41
This H-Bridge Motor Shield based on 8 N-channel MOSFET IRF3205S and 4 pcs half-bridge motor controller IR2104, to build 2 H-bridge. With this shield, you can control two DC motor with max current up to 8A with 22v voltage at the same time. Also, you can control the motor direction by the logic 0 or 1 with digital pin and speed by the PWM PIN of you MCU, like Arduino. And we support Screw interface, it is easy to connect to the motor and power.
In stock
+ −
Add to wish list
OAS808SIM GPRS GSM GPS Shield (SIMCOM- SIM808)
US$39.99
This GPRS/GSM/GPS Shield based on the SIMCom SIM808 all-in-one cellular phone module. Compares to the SIM900 Shield, the SIM808 Shield integrates the GPS function, which makes it more convenient and cost-effective for mobile applications such as cargo monitoring, that you can add location-tracking, voice, text, SMS, and data to your project.
In stock
+ −
Add to wish list
ESP8266 WIFI Shield
US$11.81
This WiFi Shield based on ESP-12F, which is the new version of the ESP-12 with the Wifi chip ESP8266. With this Shield, you can make your Arduino easy to connect to the network and control your device anywhere. Just communicate via the UART interface and control by AT command.
In stock
+ −
Add to wish list
Maduino Zero GPRS/GPS A9G
US$36.17
Maduino Zero A9G is an IoT (Internet of things) Solution based on the 32-bit Atmel’s SAMD21 MCU and GPRS/GSM GPS module A9G. It integrates a micro Controller ATSAMD21G18, GRRS/GSM GPS module A9G, which is the upgrade version of Maduino GPRS A7, power management and storage, to make the A9G ready for a real project for IoT projects such as smart-home, outdoor monitoring, etc.
In stock
+ −
Add to wish list
Maduino Zero NFC
US$35.00
Maduino Zero NFC is an Arduino compatible small development board with NFC (Near-Field Communication). This board will be the bridge that helps you wirelessly interact with your environment, drive motors, unlock strikes, control relays, read from a temperature sensor and all thanks to built-in NFC connectivity, right out of the box. Same other Maduino Zero boards, this board is based on ATSAMD21G18(which actually makes it available to work with MicroPython, if you re-program the bootloader).
In stock
+ −
Add to wish list
MakePython ESP32 with WROVER
US$24.50
MakePython ESP32 is a powerful, generic Wifi+ BLE MCU module target to MicroPython learners & developers. It is true “breadboard compatible”, with the very detailed pins explanation, it is easy to learn& use. The MakePython ESP32 has 2 optional for users: WROOM(NO PSRAM) and WROVER(8MB PSRAM).
In stock
+ −
Add to wish list
MakePython ESP32 Dev Kit / Starter Kit
US$59.00
This ESP32 Kit is a proper development kit for ESP32 MicroPython programming. Besides the MakePython ESP32 board, this kit includes the basic electronic components & modules for the learners to begin the programming. With the 12 experiments in the guide, the readers will be able to make simple electronic projects with MicroPython on ESP32, and the basic knowledge& setting up of IoT projects.
In stock
+ −
Add to wish list
MakePython ESP8266
US$16.35
This MakePython ESP8266 integrates the ESP8266 Module and 1.3 inch OLED, to give the MicroPython learners/ developers a suitable platform. It is true “breadboard compatible”, with the very detailed Pins explanation, it is easy to learn& use. The MakePython ESP8266 is programmed with MicroPython by default, users can begin the MicroPython developing as getting then on hand.
In stock
+ −
Add to wish list
MakePython ESP32 Color LCD with WROVER
US$24.55
This MakePython ESP32 Color LCD is the color LCD version of the MakePython ESP32. The only difference is that this version using a colorful 1.3 inch LCD, which makes the boards suitable for applications that need a colorful display. Besides, also this version has 2 optional for users: WROOM(NO PSRAM) and WROVER(8MB PSRAM).
In stock
+ −
Add to wish list
MakePython nRF52840
US$31.82
MakePython nRF52840 is a powerful, generic BLE MCU module target to CircuitPython/MicroPython learners & developers. It is true “breadboard compatible”, with the very detailed pins explanation, it is easy to learn& use. The nRF52840 is ready to take advantage of the considerable performance improvements for Bluetooth Low Energy (LE) with the arrival of the Bluetooth 5 specification. Of greatest importance is the support for longer range (up to x4 compared to Bluetooth 4.x) and doubling of on-air data rate, up to 2 Mbs from 1 Mbs in Bluetooth 4.x.
In stock
+ −
Add to wish list