Our Brands

K&H Products

Newest Items First
128 Per Page
AD-200 Solderless breadboard 1896 tie points
US$44.95
The AD-200 is a solderless breadboard with 1896 tie points which is used on the IDL-800A training design lab unit.  It accommodates all components with DP size and solid wire diameter of AWG # 22-30. Nickel plated contacts. Dimensions: 165 x 117 mm.
In stock
+ −
Add to wish list
PP-272 Self-Powered Breadboard
PP-272-CSA Self-Powered Breadboard
US$249.00
This is the lowest cost powered breadboard available, yet is built to a very high standard utilising a fully earthed robust metal case. The sturdy housing provides a mains on-off switch with power on indicator, variable power supply controls, and access to the built-in power supply rails. The large breadboard gives access to 2420 connection points, making it ideal for project work, laboratory use, and for schools and colleges.
In stock
+ −
Add to wish list
GL-SET 4 Binding Posts for Breadboards
GL-SET 4 Binding Posts for Breadboards
US$8.33
This is a set of 4 replacement binding posts for K&H breadboards: GL-24, GL-36, GL-48.
In stock
+ −
Add to wish list
ITC-14A IC Test Clip - 14 Pin
ITC-14A IC Test Clip - 14 Pin
US$10.74

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

In stock
+ −
Add to wish list
ITC-16A IC Test Clip - 16 Pin
ITC-16A IC Test Clip - 16 Pin
US$13.15

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

In stock
+ −
Add to wish list
ITC-24A IC Test Clip - 24 Pin
ITC-24A IC Test Clip - 24 Pin
US$17.93
Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent...
In stock
+ −
Add to wish list
ITC-28A IC Test Clip - 28 Pin
ITC-28A IC Test Clip - 28 Pin
US$20.34

Dip patented test clips for trouble shooting or development work. Rugged thermoplastic body with positive clamping action to eliminate intermittent connections.

In stock
+ −
Add to wish list
ETS7000A Digital-Analog Training System + Universal Counter
ETS 7000A Digital-Analog Training System + Universal Counter
US$615.93
This is a platform equipped with built-in power supply (fixed and variable), function generator (sine, triangle, square, TTL) and Universal Counter as well as various common Input/Output components, such as data switches, 7-segment display, LED indicators, speaker, etc. The unit contains a DC power supply, which provides the user with +5V at 1A, -5V at 300mA and variable outputs of 0V to +15V and 0V to -15V each upto a maximum of 500mA. Also built in is a function generator which operate in five variable ranges from 1Hz to 10KHz to provide sine, triangle and square waves. 
Delivery within 2-3 weeks
+ −
Add to wish list
PX-3SB, PC Board PX-3 - 5 1/2 " x 3"
PX-3SB, PC Board PX-3 - 5 1/2 " x 3"
US$9.79

These Printed Circuit Boards are designed to fit the gray plastic Project Boxes. Although designed to work together, they can be used with or without the corresponding enclosure. The PCB and Project Boxes are sold separately.

In stock
+ −
Add to wish list
PX-2SB PC Board PX-2 - 4 9/16 " x 2"
PX-2SB PC Board PX-2 - 4 9/16 " x 2"
US$6.99

These Printed Circuit Boards are designed to fit the gray plastic Project Boxes. Although designed to work together, they can be used with or without the corresponding enclosure. The PCB and Project Boxes are sold separately.

In stock
+ −
Add to wish list
PX-1 Grey Project Box - 4'' x 2'' x 1 5/8''
PX-1 Grey Project Box - 4'' x 2'' x 1 5/8''
US$5.59

These Project boxes are designed to fit any project using our PX circuit boards or any other PC circuit board in mind. Although designed to work together, they can be used with or without the corresponding enclosure. Project Box Features: Color gray. ABS plastic. Screws supplied. 

In stock
+ −
Add to wish list
PX-4 Grey Project Box - 7 1/16'' x 4 5/16" x 2 3/8''
PX-4 Grey Project Box - 7 1/16'' x 4 5/16" x 2 3/8''
US$11.19

These Project boxes are designed to fit any project using our PX circuit boards or any other PC circuit board in mind. Although designed to work together, they can be used with or without the corresponding enclosure. Project Box Features: Color gray. ABS plastic. Screws supplied. 

In stock
+ −
Add to wish list
PLCC Test Board - 44 Pins
PLCC Test Board - 44 Pins
US$19.59
This PLCC TEST BOARD offers you a fast, safe and solderless method of prototyping circuits with surface mount chip carriers. It permits fast access to SMD (surface mount devices) eliminating the time- consuming and expensive building of permanent connections to test, evaluate and improve circuits being designed.
In stock
+ −
Add to wish list
PLCC Test Board - 68 Pins
PLCC Test Board - 68 Pins
US$27.99
This PLCC TEST BOARD offers you a fast, safe and solderless method of prototyping circuits with surface mount chip carriers. It permits fast access to SMD (surface mount devices) eliminating the time- consuming and expensive building of permanent connections to test, evaluate and improve circuits being designed.
In stock
+ −
Add to wish list
PLCC Test Board - 84 Pins
PLCC Test Board - 84 Pins
US$39.19
The PLCC TEST BOARD offers you a fast, safe and solderless method of prototyping circuits with surface mount chip carriers. It permits fast access to SMD (surface mount devices) eliminating the time- consuming and expensive building of permanent connections to test, evaluate and improve circuits being designed.
In stock
+ −
Add to wish list
LP-2800 Logic Probe
LP-2800 Logic Probe
US$28.95
This is a high quality logic probe for use with TTL, DTL and CMOS ICs. The probe has a memory function which can detect the occurrence of single pulses or logic level. One shot and low repeat rate narrow pulses, which are nearly impossible to see even with a fast scope, are easily detectable and visible.
In stock
+ −
Add to wish list
LP-3500 Logic Probe with Case
LP-3500 Logic Probe with Case
US$53.79
A high quality logic probe for use with TTL, DTL and CMOS ICs. Like the LP-2800 but comes with case, two audio tones and two external terminals. Max input frequency: 17MHz. Minimum pulse width: 30ns. Input impedance: 1M Ω. Pulse flash time: 500ms.
In stock
+ −
Add to wish list
GL-12 K@H Breadboard-840 Tie Points
US$7.49
This is a 840 tie point solderless breadboard manufactured by a world leader of educational boards and trainers.
In stock
+ −
Add to wish list
GL10 K@H Breadboard-640 Tie Points
GL10 K@H Breadboard-640 Tie Points
US$7.53
This is a 640 tie point solderless breadboard manufactured by a world leader of educational boards and trainers.
In stock
+ −
Add to wish list
GL-5D K@H Breadboard-100 Tie Points
US$2.69
This is a 100 tie point solderless breadboard manufactured by a world leader of educational boards and trainers.
In stock
+ −
Add to wish list
GL12-F K@H Breadboard-840 Tie Points
GL-12-F K@H Breadboard-840 Tie Points
US$18.30
This is a 840 tie point solderless breadboard with a rigid ABS plastic backplate. 1 x GL-10 840 Tie points solderless breadboard. 2 x GL-5D 100 Tie points on either side of GL-10. 2 binding posts place at the top of the ABS plastic backplate.
In stock
+ −
Add to wish list
GL-36 K@H Breadboard-2420 Tie Points
US$27.25
This is a 2420 tie point solderless breadboard with a rigid ABS plastic backplate. 3 x GL-10 840 Tie points solderless breadboard. 5 x GL-5D 100 Tie points on either side of GL-10. 4 binding posts place at the top of the ABS plastic backplate.
In stock
+ −
Add to wish list
GL48 K@H Breadboard-3260 Tie Points
GL-48 K@H Breadboard-3260 Tie Points
US$48.45
This is a 3260 tie point solderless breadboard with a rigid ABS plastic backplate. 4 x GL-10 840 Tie points solderless breadboard. 7 x GL-5D 100 Tie points on either side of GL-10. 4 binding posts place at the top of the ABS plastic backplate.
In stock
+ −
Add to wish list
UIB-34 Interface Breadboard
UIB-34 Interface Breadboard
US$49.90

This comes with a 2320 tie point Breadboard, binding posts, universal connector sockets, and an edge plate that holds larger devices like potentiometers, switches and lights. The UIB-34 is ideal for the basic design and experiments of analof and digital devices.

In stock
+ −
Add to wish list
PLCC Test Board - 28 Pins
PLCC Test Board - 28 Pins
US$13.99
This PLCC TEST BOARD offers you a fast, safe and solderless method of prototyping circuits with surface mount chip carriers. It permits fast access to SMD (surface mount devices) eliminating the time- consuming and expensive building of permanent connections to test, evaluate and improve circuits being designed.
In stock
+ −
Add to wish list
PX-1SB PC Board PX-1 - 3 5/8" x 1 5/8"
PX-1SB PC Board PX-1 - 3 5/8" x 1 5/8"
US$6.99

These Printed Circuit Boards are designed to fit the gray plastic Project Boxes. Although designed to work together, they can be used with or without the corresponding enclosure. The PCB and Project Boxes are sold separately.

In stock
+ −
Add to wish list
IDL-400 Logic Trainer
IDL-400 Logic Trainer
US$391.99
This is ideal for educational institutions because it combines simple, easy to use, logic gates with a versatile solderless breadboard area. By using the clearly marked built-in logic gates, students new to digital electronics can implement logic circuits in a matter of seconds. As confidence grows the student will naturally progress to using more complex logic integrated circuits on the undedicated breadboard area.
Delivery within 2-3 weeks
+ −
Add to wish list
IDL-800A Digital Design Lab
IDL-800A-R Digital Design Lab
US$449.00
This is a Digital Design Lab specially designed for students and educational institutions. It contains a built-in multi-rail DC power supply, a four range digital volt meter, and a function generator along with a large area of breadboard, logic switches and LED indicators. This unit is packed full of features which avoid the need for external equipment, saving you time, space, money and energy.
In stock
+ −
Add to wish list
DT-01 Digital Trainer
DT-01 Digital Trainer
US$279.99
This Digital Trainer enables beginners and advanced students to build and test circuits in a very short time. It provides a complete digital electronics workstation. The package comes complete with two power sources, digital input/output, variable clock generator, two large solderless breadboards, and a sturdy book-style case. The system also comes with a high quality CMOS/TTL logic probe.
In stock
+ −
Add to wish list