WS2812 Digital RGB LED Strip, High brightness, Energy-saving And Low power consumption, Cuttable and Programmable
WS2812 Digital RGB LED Strip
Programmable LED, Natural & Bright Color
Energy-saving, Colorful And Widely Used
Specifications
| LED type | 5050 | IC | WS-2812B |
| Voltage | 5V | Color | RGB |
| PCB width | 10mm | Beam angle | 120° |
| Operating power | 0.3W/LED | Length | 1m/roll |
| Operating temperature | -25~80℃ | Grey scale | 256 Adjustable (per color) |
| LED Quantity | 60 LEDs/M | Degree of protection | IP65 |
| Connection | 3PIN SM connector cable + 2PIN voltage adding cables | Installation method | with 3M double-sided tape on the back |
| Cable definition | Red cable (5V positive), white cable (5V negative) and green cable (DATA signal) | ||
Product Details
* Note: Please cut it from the solder joint to avoid or reduce unnecessary waste and damage.
Flexible And Bendable
High Light Transmittance And Flexible, Insulated And Anti-Leakage, Can Be Bent Into Any Shape
IP65 Protection Rating
Covered With High-Transparency Resin To Protect Against Small Water Jets
Installation Mode
Product Demonstration
Product Show
Dimensions
Resources & Services
A 5V LED strip can be configured as addressable with an Arduino or simply as a regular LED strip that most people are comfortable with. If you do not have the whole kit and you have only the strip, you can use the following basic connection: Connect a 5V controller to the wires of the LED strip (Like our LED-STRIP-CONT5), then connect the two wires of the controller to the screw terminals of the female jack to screw terminal adapter (like our 368-ADA), then plug a 5V 2AMP Power adapter (like our 276-ADA) to the female jack of the 368-ADA.
WARNING
