BAT-T-11 Blue LED Digital Battery Capacity Tester, Voltmeter 8-100V

Price:
US$17.97
BAT-T-11
In stock
+
Add to wish list

This battery and capacity tester can measure the voltage between 8-100V and charge on LiPo, LiFe, Li-Lon, NiCd, and NiMh batteries.

Specification:

Voltage measurement range: DC8V-100V
Display mode: LCD screen
Measurement accuracy: 1%±1 word
Working temperature: -10-+70℃
Working pressure: 80-106Kpa
Installation size: 58mm*28mm
Dimensions: 61mm*33mm*15mm
Working current: <15MA
Display color: blue, white
Measurement speed: about twice per second
Working humidity: 10-80%
Sun exposure: no direct exposure

SUPNOVA Battery Monitor

  • The battery monitor is suitable for 8-100V (12v 24v 36v 48v 60v 72v) Ternary lithium battery, lead-acid battery, lithium iron phosphate battery. Default 12 Volt lead acid battery.
  • The battery monitor program is very perfectly which suitable for almost all batteries (8-100V). But you must be know the highest and lowest voltage of your battery if you don't know what kind of battery it belongs to. Please refer to the newest manual (Custom Settings).
  • The battery testers not only can accurately test the battery voltage and capacity but show also percentage display.
  • The battery monitors with power-off memory, you would not reset if power off.
  • The White back-light with buzzer alarm for a low voltage and the Bule back-light do not have alarm but the screen will flash if you set a low voltage. (The Bule back-light will add buzzer alarm for a low voltage about in June 2021).

Note:

  • The battery monitor tester must be manually set according to different batteries (except 12V lead-acid battery), otherwise the data will not be accurate (the voltage is accurate, but the percentage will display 100% forever), You can refer to the instructions for operation.
  • Since industry standards for batteries are not uniform, you also can set the highest and lowest voltages if you think that the capacity and percentage accuracy are not enough. Long press SET to enter mode 3, such as the lowest voltage is 11.6V, the highest is 12.6V(126V express 12.6V), and then long press the power button, the number does not flash means that it has been saved, and then long press SET to return to the main page.

Parameter settings
(L: Ternary lithium battery ; P: Lead-acid battery ; F: Lithium iron battery pack)

Set battery type
step 1: Long press "SET" button to show "1- -" on the display
step 2: Press "SET" again, can choose battery type: L , P , F etc...
step 3: Press "M" button, "1- -L or P or F" will appear on the display
step 4: Press "M" button again,"1- - L02" will appear on the display, You can set the number of batteries or battery packs
step 5: Long press "M" button to confirm, "1- -" will appear on the display, then long press "SET" button to return

Set backlight time
step 1: In the working state, long press the "SET" button to show "2- -" on the display
step 2: Press "M" button , the screen will show "ON/OFF", flashing
step 3: Press "M" button again to set the backlight time, you can choose 10/30/60/120 seconds
step 4: Press "SET" button to confirm. can turn off the setting of ON/OFF

Set high/low voltage
step 1: In the working state, long press the "SET" button to display "3- -"
step 2: Press "M" button display 00 00.0V, then you can press "SET" button to choose 00 000 flash
step 3: Press "M" button to set, then press "SET" button to confirm

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov