The Sunfounder CN0340D is a 4WD Robot Car Kit for Raspberry Pi Pico. The Raspberry Pi Pico comes included and has multiple functionalities. The Kit is highly modular and completely open-source.
The SunFounder Pico-4wd robot car kit is based on Raspberry Pi Pico, which is a small, fast and versatile board designed by Raspberry Pi. It is equipped with customized expansion boards, a 4-wheel drive, multi-function modules, and 3 8-bit WS2812 RGB boards. Combining these modules can realize diversified functions and brilliant lighting effects.
The kit includes a Raspberry Pi Pico with soldered GPIO pins. Compared to Arduino boards such as the Nano, the Pico can be programmed in MicroPython and has more computing power as well as a performance ratio.
Features
- The Pico Car Kit is a Raspberry Pi Pico-based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included)
- The Raspberry Pico Car is equipped with a variety of modules, ultrasonic modules, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions.
- The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications.
- In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit.
- The Raspberry Pi Pico-4wd robot car kit is completely Open Source, providing structure diagrams, module schematics and source code.
- Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors.
Uses
Radar Sampling Equipped with an ultrasonic radar for precise obstacle avoidance and object following. |
Velocity Measurement Equipped with a speed sensor module, you can always confirm and adjust the speed of the car on the APP, and also supports mileage calculation. |
Line Following Equipped with a grayscale sensor for line following and cliff detection. You can combine with WS2812 RGB boards to make the project more interesting. |
Resources
Shipping List
Raspberry Pi Pico × 1 | Top Plate × 1 | M1.5x 4 Self-tapping Screw × 4 | M3X30 Standoff × 7 |
Speed Module × 1 | Bottom Plate × 1 | M3x8 Self-tapping Screw × 4 | Screwdriver × 1 |
Grayscale Semsor Module × 1 | Support × 4 | M1.4x6 Screw × 6 | 5-pin Wire × 2 |
8-Bit WS2812B RGB × 3 | Radar support × 1 | M2.5x6Screw × 10 | 4-pin Wire × 4 |
Pico RDP × 1 | R2056 Rivet × 4 | M3x6 Screw × 12 | 3-pin Wire × 5 |
Encoder Disk × 2 | R2655 Rivet × 12 | M3x28 Screw × 10 | Riboon × 1 |
Ultrasonic Module × 1 | R3055 Rivet × 6 | M1.4 Nut × 6 | USB Cable × 1 |
Motor × 4 | Battery Holder × 1 | M3 Nut 6 × 12 | Zip Tie × 4 |
Servo × 1 | Wheel × 4 | M2.5 x 11Standoff × 6 |