Raspberry Pi Pico 4WD Robot Car Kit , Open Source& MicroPython& App Control

Price:
US$145.37
CN0340D
In stock
+
Add to wish list

The Sunfounder CN0340D is a 4WD Robot Car Kit for Raspberry Pi Pico. The Raspberry Pi Pico comes included and has multiple functionalities. The Kit is highly modular and completely open-source.

The SunFounder Pico-4wd robot car kit is based on Raspberry Pi Pico, which is a small, fast and versatile board designed by Raspberry Pi. It is equipped with customized expansion boards, a 4-wheel drive, multi-function modules, and 3 8-bit WS2812 RGB boards. Combining these modules can realize diversified functions and brilliant lighting effects.

The kit includes a Raspberry Pi Pico with soldered GPIO pins. Compared to Arduino boards such as the Nano, the Pico can be programmed in MicroPython and has more computing power as well as a performance ratio.

Features

  • The Pico Car Kit is a Raspberry Pi Pico-based, cool, robotics kit for beginners (12+ Teens) and adults to learn Raspberry Pi Pico programming, electronics assembling and robotics knowledge. (Raspberry Pi Pico with pre-soldered GPIO pins is included)
  • The Raspberry Pico Car is equipped with a variety of modules, ultrasonic modules, grayscale sensor, speed sensor, etc and three 8-bit WS2812 RGB boards. In addition, this 4-wheel drive car with Pico RDP also can be DIY interesting functions.
  • The Pico robot building kit can perform Obstacle Avoidance, Object Tracking, Speed Measurement, Mileage Calculation, Line Following and Cliff Detection. In addition, the car is surrounded by three 8-bit WS2812 RGB boards that are capable of displaying cool light effects and direction indications.
  • In addition to providing MicroPython code and tutorials, the customizable application SunFounder Controller is also provided to control this robotic kit.
  • The Raspberry Pi Pico-4wd robot car kit is completely Open Source, providing structure diagrams, module schematics and source code.
  • Includes 3 8-Bit WS2812 RGB Boards Strip. Each LED can be Independently Controlled to Display a Myriad of Colors.

Uses

Radar Sampling
Equipped with an ultrasonic radar for precise obstacle avoidance and object following.
Velocity Measurement
Equipped with a speed sensor module, you can always confirm and adjust the speed of the car on the APP, and also supports mileage calculation.
Line Following
Equipped with a grayscale sensor for line following and cliff detection. You can combine with WS2812 RGB boards to make the project more interesting.

Resources

Shipping List

Raspberry Pi Pico × 1 Top Plate × 1 M1.5x 4 Self-tapping Screw × 4 M3X30 Standoff × 7
Speed Module × 1 Bottom Plate × 1 M3x8 Self-tapping Screw × 4 Screwdriver × 1
Grayscale Semsor Module × 1 Support × 4 M1.4x6 Screw × 6 5-pin Wire × 2
8-Bit WS2812B RGB × 3 Radar support × 1 M2.5x6Screw × 10 4-pin Wire × 4
Pico RDP × 1 R2056 Rivet × 4 M3x6 Screw × 12 3-pin Wire × 5
Encoder Disk × 2 R2655 Rivet × 12 M3x28 Screw × 10 Riboon × 1
Ultrasonic Module × 1 R3055 Rivet × 6 M1.4 Nut × 6 USB Cable × 1
Motor × 4 Battery Holder × 1 M3 Nut 6 × 12 Zip Tie × 4
Servo × 1 Wheel × 4 M2.5 x 11Standoff × 6  
 
Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov