The WAVE-21003 is a 9.7inch e-Paper monitor, it has a 1200x825 resolution, HDMI interface. Supports Raspberry Pi, Jetson Nano, and Windows PC. With no need for a backlight, the display has a realistic paper-like feel.
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in the clear fluid will move to sides of microcapsule when an electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light requires no backlight and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.
Features
- 9.7inch e-Paper, 1200x825 resolution (150DPI)
- This paper-like display has no blue light, it is eye care.
- Display type: Passively reflective and require ambient light for reading.
- Supports mode/contrast adjust
- Supports Raspberry Pi/Jetson Nano/PC
Specifications
- mini HDMI Port: You can connect the 9.7inch HDMI e-Paper (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1200x825 resolution
- Power indicator: Indicate the status of the HDMI e-Paper.
- 5V Power supply: The display requires at least 5V/1.5A power input, a 5V/3A power adapter is provided in the package.
- UPD/RUN Switch: By default, you should turn the switch onto the RUN side (close to the power port) for displaying, You can turn it onto the UPD side (close to the contrast adjustment) for updating firmware.
- Multifunction key: This key is used for configuration (screen refresh, mode switch, contrast/refresh rate adjustment). You can adjust the mode and contrast according to the working situation.
- Toggle up （toward the board edge）: Change the display mode (A2+/GC16/A2)
- Toggle down (toward the power port): Refresh the display in full update mode to clear the ghost or wakeup it from sleep mode
- Press: Contrast/Speed adjustment. You can press the key to enter the menu and toggle it up/down to choose the contrast/speed value and then press the key again to confirm the setting. Every time you confirm the setting, the display will do a full update for clearing ghosts.
- Power Indicator: The indicator is used to indicate the status of the display
Connections & Compatibility
 Working With Raspberry Pi Supports Raspbian / Ubuntu / Kali Supports all versions of Raspberry Pi |
 Working With AI Computer Jetson Nano Supports Ubuntu |
 Working With Computer Supports Windows 10 / 8.1 / 8 / 7 |
Dimensions
Resources
Shipping List
Weight: 0.431 kg
- 9.7inch e-Paper x1
- Driver board + FPC + adapter board x1
- HDMI cable x1
- HDMI to micro HDMI adapter x1
- USB-A to USB-C cable x1
Wiki: 9.7inch_HDMI_e-Paper
WARNING
