WAVE-20232, Environment Sensors Module for Raspberry Pi Pico, I2C Bus

Price:
US$44.36
WAVE-20232
In stock
+
Add to wish list

The WAVE-20232 is a module for the Raspberry Pi Pico equipped with several sensors that allow it to college a wide arrange of data such as, temperature, humidity, light intensity, UV rays, Motion, Etc.

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, UV ray, etc. It can also be used to build a robot that can detect motion and orientation

Raspberry Pi Pico is NOT included.

Features

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
  • Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
  • Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
  • Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
  • Onboard LTR390-UV-1 sensor, for measuring UV rays
  • Onboard SGP40 sensor, for detecting ambient VOC
  • I2C bus, allows retrieving data by just using two wires
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Specifications

  • TSL25911FN DIGITAL AMBIENT LIGHT SENSOR
    • I2C address: 0x29
    • Effective range: 0~88000Lux
  • BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR
    • I2C address: 0x76
    • Temperature detection: -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy)
    • Humidity detection: 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay)
    • Air pressure detection: 300~1100hPa (0.18Pa resolution, ±1hPa accuracy)
  • ICM20948 MOTION SENSOR (9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCOPE, 3-AXIS MAGNETOMETER)
    • I2C address: 0x68
    • Accelerometer resolution: 16-bit
    • Accelerometer range (configurable): ±2, ±4, ±8, ±16g
    • Gyroscope resolution: 16-bit
    • Gyroscope range (configurable): ±250, ±500, ±1000, ±2000°/sec
    • Magnetometer resolution: 16-bit
    • Magnetometer range: ±4900µT
  • LTR390-UV-1 UV SENSOR
    • I2C address: 0x53
    • Response wavelength: 280nm - 430nm
  • SGP40 VOC SENSOR
    • I2C address: 0x59
    • Measuring range: 0 ~ 1,000 ppm ethanol equivalent
    • Limit condition: < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail)
    • Response time: < 10 s (tau 63 %)
    • Start time: < 60 s
  • On-chip humidity compensation support

Pinout

Board and Dimensions

1 TSL25911FN
digital ambient light sensor, for measuring IR and visible light
5 Voltage level translator
5V to 3.3V/1.8V
2 LTR390-UV-1
UV sensor
6 BME280
temperature, humidity, and air pressure sensor
3 SGP40
VOC sensor
7 Logic level conversion
3.3V-1.8V
4 ICM20948
3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer
8 I2C selection

Resources

Shipping List

Weight: 0.01 kg

  1. Pico-Environment-Sensor x1
 
Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov