5VDC 5M WS2812B Addressable RGB LED Strip, IP65

Price:
US$31.80
LED-STRIP-745B-5M
In stock
+
Add to wish list

5VDC 5M WS2812B Addressable RGB LED Strip, IP65

These flexible RGB LED strips are an easy way to add complex lighting effects to a project. Each LED has an integrated driver that allows you to control the colour and brightness of each LED independently. The combined LED/driver IC on these strips is the extremely compact WS2812B (essentially an improved WS2811 LED driver integrated directly into a 5050 RGB LED), which enables higher LED densities. In the picture, you can actually see the integrated driver and the bonding wires connecting it to the green, red, and blue LEDs, which are on at their dimmest setting.

Current draw and voltage drop

Each RGB LED draws approximately 50 mA when it is set to full brightness and powered at 5 V. This means that for every 30 LEDs you turn on, your LED strip could be drawing as much as 1.5 A. Be sure to select a power source that can handle your strip’s current requirements.

There is some resistance in the power connections between the LEDs, which means that the power voltage near the end of the strip will be less than the voltage at the start of the LED strip. As the voltage drops, RGB LEDs tend to look redder and draw less current. This voltage drop is proportional to the current through the strip, so it increases when the LEDs are set to a higher brightness.

Specifications

  • Individually addressable RGB LEDs (30 LED's per meter)
  • IP67 Waterproof
  • Adhesive strip on the backside of the strip
  • Operating voltage 5VDC
  • Sold by the 5 meters.
  • 24-bit colour control (8-bit PWM per channel); 16.8 million colours per pixel
  • The one-wire digital control interface
  • Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness
  • 12 mm width, 4.6 mm thickness
  • Black strip (PCB) colour
  • Power/data connectors on both strips end for easy chaining, and the input side includes an additional power and ground wire for alternate power connections
  • Strips can be cut apart along the lines between each RGB LED segment to separate them into usable shorter sections
  • Example code available for Arduino, AVR, and mbed
Code resources:
  1. Example Code for AVR: https://github.com/pololu/pololu-led-strip-avr
  2. Example Code for Arduino: https://github.com/pololu/pololu-led-strip-arduino
  3. Example Code for mbed: https://os.mbed.com/users/DavidEGrayson/code/PololuLedStrip/
Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov