8 Relay Wireless Remote Control

Relay Wireless Remote Control

Features

• 8 Relay Module with Remote Control.
• Remotely control up to 8 devices up to 200 meters away.
• Eight 10 Amp relays rated at 125VAC.
• Extremely easy to set up and use.
• This remote control is perfect for domestic applications such as remote lighting and appliance control,
• up down control for motorized window shades, electric door entrance access, etc.
• Excellent as a simple wireless remote control for robotics applications.
• The relays are set to toggle action (press once to activate relay, press same button second time to release)
• Multiple relays can be activated to stay on at the same time.

Remote Programming

• Relays corresponding to #1-8 buttons are CCW from RIGHT to LEFT when facing the 12V power connector.
• When using for the first time the remote has to be programmed.
• After powering the relay module with 12VDC:
• Press the black programming button on the relay module next to the LED.
  The red LED will flash once to indicate that it is ready to accept a button code.
  Push button #1 once on the remote.
  You will hear a click from the relay and the LED will flash 4 times indicating that is has accepted the code for relay #1.
  You can check by pressing the #1 button to toggle the #1 relay ON and OFF.
• Press the programming button on the relay module again and repeat procedure for buttons #2-8.
• The programs will be retained even if power is removed from the module.
• To reset all programs for both remotes hold the programming button down for about 8 seconds until the LED turns off.

Relay Module

• Number of relays: 8
• Working voltage: DC12V
• Relay Connections: A: NO, B: COM, C: NC
• Quiescent condition: Less than 6mA
• Working temperature: -40°c+80°c
• Receiver sensitivity: more than -105dBm
• Working frequency: 315mhz
• Output voltage: DC and 125VAC as required
• Relay normal current: 3A
• Max load current: 10A
• Dimensions: 72 x 52 x 26mm

Remote Control

• Number of Buttons: 8
• Remote Range: 200 meters
• Operating Voltage: DC 12V
• Frequency: 315 Mhz
• Operating Current: 13 mAh
• Code Type: Fixed code / Learning code
• Dimensions: 58 x 39 x 14mm

Items Included

• 1 x Eight Relay Module
• 1 x 8 button Remote Control