2993-ADA Tower Light - Red Yellow Green Alert Light with Buzzer - 12VDC

Price:
US$42.35
2993-ADA
Delivery within 2-3 weeks
+
Add to wish list

Tower Light - Red Yellow Green Alert Light with Buzzer - 12VDC

Alert tower lights are really easy to use. The brown wire is the common +12V power line, then the other wires are connected to ground to activate each of the three LED lights: red wire for red light, yellow wire for yellow light and, you guessed it, green wire for green light. The final orange wire is what controls the buzzer which will sound continuously when the wire is grounded. We did notice that you can't have both the yellow and red lamps on at once, and in general its best to only have one lamp lit at a time for max brightness. The buzzer can be turned on whenever, it does not seem to be affected by the lights.

You will need a 12VDC power supply to get it going, the one that we carry will do well for fixed installations (352-ADA). If you are using this with a 3V or 5V microcontroller or computer, use 4 x NPN transistors (PN2222A) or N-channel mosfets to sink current from each wire. Our guide on analog LED strips is pretty much the same wiring you need, except its only about 50mA per segment. 

Technical Details

  • Range of motion: 180°
  • Height: 340mm / 13.4"
  • Diameter of light: 50mm / 1.97"
  • Weight: 221g

 

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov