1472-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase

Price:
US$55.94
1472-POLOLU
In stock
+
Add to wish list

1472-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in).

This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.

Our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter can be used to mount objects on the stepper motor’s 1/4″-diameter output shaft, and we carry a NEMA 23 steel bracket for securely mounting this stepper motor to a flat surface (the picture above shows this bracket being used with a taller NEMA 23 stepper motor).

Specifications

  • Size: 56.4 mm square × 56 mm, not including the shaft (NEMA 23)
  • Weight: 0.7 kg (25 oz)
  • Shaft diameter: 6.35 mm (0.25″) “D”
  • Steps per revolution: 200
  • Current rating: 1 A per coil
  • Voltage rating: 7.4 V
  • Resistance: 7.4 Ω per coil
  • Holding torque: 9 kg-cm (125 oz-in)
  • Inductance: 10 mH per coil
  • Lead length: 30 cm (12″)
  • Output shaft supported by two ball bearings

More specifications are available in the datasheet (46k pdf).

Dimensions

The following diagram shows the stepper motor dimensions in mm. The output D-shaft has a 0.25″ (6.35 mm) diameter with a section that is flattened by 0.5 mm (note: the diagram below incorrectly lists this flattened width as 6 mm when it is really 5.85 mm). This shaft works with our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter.

Stepper Motor Applications

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

  • Printers
  • CNC machines
  • 3D printer/prototyping machines (e.g. RepRap)
  • Laser cutters
  • Pick and place machines
  • Linear actuators
  • Hard drives
Product
Size
NEMA size
Weight
(g)
Shaft diameter (mm)
Shaft type
Steps per revolution
Current rating (A)
Voltage rating (V)
2690-POLOLU Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase 42.3 mm square × 38 mm
(NEMA 17)1
17 4152 8 38 cm threaded rod3 200 1.684 2.8
2689-POLOLU Stepper Motor with 18cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase 42.3 mm square × 38 mm
(NEMA 17)1
17 3552 8 18 cm threaded rod3 200 1.684 2.8
2299-POLOLU Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase 50 mm square × 16 mm1   150 5   200 14 5.9
2268-POLOLU Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase 42.3 mm square × 38 mm
(NEMA 17)1
17 3852 8 28 cm threaded rod3 200 1.684 2.8
2267-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase 42.3 mm square × 38 mm
(NEMA 17)1
17 285 5 5 mm "D" 200 1.684 2.8
1474-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 57×56mm, 2.5V, 2.8 A/Phase 56.4 mm square × 56 mm1 23 700 6.35 1/4 inch "D" 200 2.84 2.5
1473-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 3.6V, 2 A/Phase 56.4 mm square × 56 mm1 23 700 6.35 1/4 inch "D" 200 24 3.6
1472-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase 56.4 mm square × 56 mm1 23 700 6.35 1/4 inch "D" 200 14 7.4
1475-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 4.5V, 2 A/Phase 56.4 mm square × 76 mm1 23 1000 6.35 1/4 inch "D" 200 24 4.5
1478-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 57×76mm, 3.2V, 2.8 A/Phase 56.4 mm square × 76 mm1 23 1000 6.35 1/4 inch "D" 200 2.84 3.2
1477-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase 56.4 mm square × 76 mm1 23 1000 6.35 1/4 inch "D" 200 14 8.6
1476-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×41mm, 5.7V, 1 A/Phase 56.4 mm square × 41 mm1 23 450 6.35 1/4 inch "D" 200 14 5.7
2298-POLOLU Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×11.6mm, 3.5V, 1 A/Phase 42 mm square × 11.6 mm1   70 5   200 14 3.5
2297-POLOLU Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×11mm, 4.5V, 1 A/Phase 50 mm square × 11 mm1   90 5   200 14 4.5
2296-POLOLU Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase 42 mm square × 18.6 mm1   140 5   200 14 5.4
2295-POLOLU Sanyo Miniature Stepper Motor: Bipolar, 200 Steps/Rev, 14×30mm, 6.3V, 0.3 A/Phase, Double Shaft 14mm square × 30 mm5   28 4 Double shaft 200 0.36 6.3
2294-POLOLU Sanyo Miniature Stepper Motor: Bipolar, 200 Steps/Rev, 14×30mm, 6.3V, 0.3 A/Phase 14 mm square × 30 mm5   27 4 Single shaft 200 0.36 6.3
1200-POLOLU Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase 42.3 mm square × 48 mm
(NEMA 17)1
17 350 5 5 mm "D" 200 1.24 4
1209-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase 35 mm square × 36 mm1 14 180 5 5 mm "D" 200 14 2.7
1208-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase 35 mm square × 28 mm1 14 140 5 5 mm "D" 200 0.54 10
1207-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase 35 mm square × 26 mm1 14 130 5 5 mm "D" 200 0.284 7.4
1206-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 28×45mm, 4.5V, 0.67 A/Phase 28 mm square × 45 mm1 11 140 5 5 mm "D" 200 0.674 4.5
1205-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase 28 mm square × 32 mm1 11 110 5 5 mm "D" 200 0.674 3.8
1204-POLOLU Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase 20 mm square × 30 mm1 8 60 4 4 mm "D" 200 0.64 3.9

 

Notes:

1. Not including the shaft.
2. This measurement includes the traveling nut, which adds 11.6 g (0.41 oz).
3. ISO definition of thread characteristics: Tr 8 × 8(P2) – trapezoidal thread, 8 mm diameter, 8 mm lead, 2 mm pitch.
4. Per coil.
5. Not including the shaft
6. Per coil
Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov