The GF8056 Elenco is a Function Generator with Built in 60MHz Frequency Counter.
Features:
- 6 function waveform
- Linear/log sweep
- Sweep rate from 10ms to 5s
- Amplitude with –20dB attenuator
- Output level from 0.1Vpp to 20Vpp
- Sweep output 10Vpp
- 0.200Hz to 60MHz 250 Vrms max. input
- EXT counter trigger level control and input attenuator –26dB
- AC/DC, HF/LF, 100kHz filter switch
- Frequency: X0.05 - X3.0
- Decimal point Hz/kHz LED auto select
- 5 digit red LED autorange counter (GF-8056 & GF-8046 only)
- Auto gatetime
- EXT TRIG’D LED Light - Trig level too high Dark - Trig level too low Flashing - triggering
| Main Output | |
| Frequency range | 0.5Hz to 5MHz in 8 ranges (GF-8056) 0.5Hz to 3MHz in 6 ranges (GF-8046) |
| Waveforms | 4 waveforms (sine, square, triangle, DC) (GF-8056 only) 6 waveforms (sine, square, triangle, ramp, +pulse, –pulse) (GF-8046 & GF-8025) |
| Stability | 0.1% for 15 minutes, 0.2% for 24 hours |
| DC offset | Continuously variable +10V no load |
| Symmetry | 50% (positive and negative half) |
| Linearity | <1% 1Hz-100kHz for triangle wave |
| Distortion | <2%, 1Hz to 100kHz for sine wave <1%, 1Hz to 100kHz (GF-8056) |
| Rise / fall time | <60ns (GF-8025, GF-8046), <90ns (GF-8056) for square wave |
| Attenuator | 0dB, –20dB (<2% accuracy) (GF-8046,8025) X20: –26dB (+2% accuracy), X1: 0dB (GF-8056 only) |
| Sync Output | |
| Output level | TTL level, >3Vpp fixed amplitude |
| Fanout | >20 |
| Rise time | <30ns (GF-8025, GF-8046) <60ns (GF-8056) |
| VCF Input | |
| Input voltage | 0-10V |
| Input frequency | DC-1kHz variance 1:1, 1:1,000 |
| Sweep | |
| Output amplitude | 10Vpp (no load) or 5Vpp (1kΩ load) |
| Output frequency | Continuous adjustment 0.2Hz - 100Hz |
| Sweep speed | 10ms - 5s, continuously variable |
| Sweep width | 1:1 - 1:100 continuously variable |
| Output waveform | Linear or log sweep ramp wave |
| Counter (GF-8046 & GF-8056 only) | |
| Display | 5 digit 0.36” red LED display with autorange |
| Resolution | 0.001Hz |
| Time base | 20MHz |
| Accuracy | <0.002% |
| Max. input voltage | 150Vrms (GF-8046), 250Vrms (GF-8056) |
| Input impedance | 1MΩ <2% |
| Input frequency | 0.2Hz - 60MHz |
| Attenuator | 0dB, –26dB |
| Gate time | 0.25s - 10s, auto-setting |
| Sensitivity | <30mVrms (1MHz) |
| General | |
| Power source | AC 115V / 230V +10%, 50/60Hz, 25W |
| Dimensions | 10 13/16” (W) x 3 1/2” (H) x 11 13/16” (D) |
| Weight | 5 lbs. 8 oz. (GF-8046), 4 lbs. 13 oz. (GF-8025) |
| Safety approvals | UL, CUL, GS, TUV, CE, IEC1010, EN61010 |
WARNING
