Generic Physics

1 2 3 4
US$1.30
Taylor type. PVC. One meter long, one side cm the other side inches. Color may vary based on manufacturer availability.
Delivery within 1-2 weeks
+
Add to wish list

US$7.48
Solid wood with clear lacquer finish. Width: 1 Inch. Height: 5/16 Inch. Frontside: Scaled in Centimeters, divided both edges into Millimeters. Backside: Scaled in Inches, divided into 1/8 Inch.
Delivery within 1-2 weeks
+
Add to wish list

US$3.64
Glass, optically worked. Back silvered with protective coating. 38mm Diameter x 150mm Focal Length.
In stock
+
Add to wish list

US$3.48
Glass, optically worked. Back silvered with protective coating. 50mm Diameter x 150mm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$33.90
To study conservation of mechanical energy/momentum. All metal construction. When the wheel is rolled to the top with thread winded on the axle, and released the potential energy gained is turned into kinetic energy. When the wheel reaches the bottom most position the kinetic energy is again converted into potential energy and the wheel rolls back to the top.
Delivery within 1-2 weeks
+
Add to wish list

US$2.81
Glass, optically worked, with ground edges. 50mm diameter x 15cm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$2.68
Glass, optically worked, with ground edges. 50mm diameter x 20cm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$2.68
Glass, optically worked, with ground edges. 50mm diameter x 25cm Focal Length.
In stock
+
Add to wish list

US$2.68
Glass, optically worked, with ground edges. 50mm diameter x 500mm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$4.77
Glass, optically worked, with ground edges. 50mm diameter x 5cm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$6.28
Glass, optically worked, with ground edges. 75mm diameter x 20cm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$3.38
Students can test solutions for acid determination. Easy-to-use blue litmus strip turns red for acids. 100 strips per vial.
In stock
+
Add to wish list

US$3.38
Base Indicator Strips Red Litmus Paper. Students can test solutions for base determination. Easy-to-use red litmus paper turns blue for bases. 100 strips per vial.
In stock
+
Add to wish list

US$6.47
It consists of a small alnico bar magnet mounted in freely rotating gimbal. It rotates in 3D so that all x, y and z co-ordinates, three-dimensional magnetic force fields, can be mapped. Strong plastic construction.
Delivery within 1-2 weeks
+
Add to wish list

US$13.13
4 inch (100mm) x 0.49 inch (12.4mm) x 0.33 inch (8.4mm). Alnico Alloy. North South Poles marked. Sold in pairs, with keepers.
Delivery within 1-2 weeks
+
Add to wish list

US$6.18
Each of the four colored rings is a magnet that sits on a magnetic base. The rings can be flipped to either attract or deflect one another to simulate floating. The base is 4-inches tall, 1.5-inches wide. The 4 rings included are 1.25-inches in diameter with a hole to slide onto the base.
In stock
+
Add to wish list

US$7.58
Set of 3 Floating Magnets, each 1.25 inch/ 34 mm dia., 3/8 inch / 9mm thick, plastic covered reduce breakage with half red North and half blue South. Mounted on base 4 inch/ 100 mm dia. x 8.5 inch / 215 mm ht. To demonstrate that like poles repel and opposite poles attract.
Delivery within 1-2 weeks
+
Add to wish list

US$11.48
No more messing with iron fillings. This apparatus can be used to demonstrate and study magnetic forces of magnets with ease. Comprised of 24 mounted magnetic needles in a plastic box 150 mm x 100 mm x 20 mm.
Delivery within 1-2 weeks
+
Add to wish list

US$8.35
The JUMBO sized magnetic marbles come in at 1.33" in diameter and are not a choking hazard. Watch as they spin, attract and repel each other on a table ... a fun way to learn about magnetism! 
In stock
+
Add to wish list

US$9.04
For use in experiments with magnetism. Pack of 500 gm, in sprinkler type plastic bottle.
In stock
+
Add to wish list

US$9.04
For use in experiments with magnetism. Pack of 500 gm, in sprinkler type plastic bottle.
In stock
+
Add to wish list

US$4.42
6 mil thick, 27"W x 36"L. Aprons Resistant to lab chemicals, acids, bases, oil and grease. With reinforced neck loop and waist ties.
Delivery within 1-2 weeks
+
Add to wish list

US$41.90
Ideal for supporting or elevating different objects in the lab, like beakers, flasks, water baths, stirrer etc. Fitted with over-sized knob for easy adjustment.
Delivery within 1-2 weeks
+
Add to wish list

US$43.00
Ideal for supporting or elevating different objects in the lab, like beakers, flasks, water baths, stirrer etc. Fitted with over-sized knob for easy adjustment.
Delivery within 1-2 weeks
+
Add to wish list

US$1.82
Made from Stainless steel. 6 Inches in length.
In stock
+
Add to wish list

US$16.15
3 lamp holders, connecting bus bars allow easy changing from series to parallel.
Delivery within 1-2 weeks
+
Add to wish list

US$2.05
Glass, optically worked, with ground edges. 38mm diameter x 10cm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$3.30
Glass, optically worked, with ground edges. 38mm diameter x 5cm Focal Length.
Delivery within 1-2 weeks
+
Add to wish list

US$41.90
Study Newton's Second Law of Motion and the mechanical effects of friction with the Inclined Plane Set. The angle of incline can be varied anywhere from 0 to 45 degrees. Two wooden blocks, a Hall's Carriage and a metal block are included to demonstrate varying amounts of friction.
Delivery within 1-2 weeks
+
Add to wish list

US$23.96
The Inertia Balance is used to quantitatively determine the inertial mass of an object and is an easy way to demonstrate Newton's First Law of Motion. When pushed sideways you can observe that its motion is independent of the effects of gravity and you can calculate the periodic motion of the balance.
Delivery within 1-2 weeks
+
Add to wish list

US$546.19
Heating Plate Material: Polished Stainless Steel. Heating Plate Diameter: 150mm. LED Displays: Temperature, RPM, Time. Speed Range: 50 to 1500 RPM. Maximum Stirring Bar Length: 80mm. Heat Output: 450 W. Temperature Range: Ambient to 350 Degrees Celsius. Adjustable Safety Cut-Off: 50 to 400 Degrees Celsius. Control Accuracy of PT100: +/- 1k. Unit Dimensions: 273x160x102mm. Unit Weight: 3.3 kgs. Permissible Ambient Temperature: 5-40 Degrees Celsius. Permissible Relative Moisture: 80%. RS232 Interface: Yes. Analog Output: No. Frequency: 60 Hz. Voltage: 110 V. Included Accessories: Zinc Boss Head 16mm – 1 Piece. Stainless Steel Rod 400x12mm – 1 Piece. Magnetic Stirring Bar 35x14mm – 1 Piece. PT100 Sensor Probe – 1 Piece.
Delivery within 1-2 weeks
+
Add to wish list

US$5.20
100 gm (0.1 kg) weight, hooked one end. Nickel Plated, Steel. Weight engraved on surface. Length w/o Hook: 0.99 Inch (25 mm). Diameter: 0.99 Inch (25 mm).
Delivery within 1-2 weeks
+
Add to wish list

US$10.82
500 gm, 0.5 kg weight, hooked one end. Nickel Plated, Steel. Weight engraved on surface. 3.25 inch (85mm)L x 1.5 inch (38mm) Dia.
Delivery within 1-2 weeks
+
Add to wish list

US$10.79
Glass construction. On holding the lower bulb in hand causes the liquid inside to biol and shoot into the top bulb. The body heat causes the liquid to appear as if boiling. Any excess amount of pressure on the product can cause it to shatter or break. Use extreme caution. DO NOT IN ANY CASE HEAT THIS PRODUCT, IT WILL CAUSE IT TO EXPLODE. The liquid inside is extremely volatile and inflammable.
Delivery within 1-2 weeks
+
Add to wish list

US$10.79

Glass construction. On holding the lower bulb in hand causes the liquid inside to biol and shoot into the top bulb. The body heat causes the liquid to appear as if boiling. Any excess amount of pressure on the product can cause it to shatter or break. Use extreme caution. DO NOT IN ANY CASE HEAT THIS PRODUCT, IT WILL CAUSE IT TO EXPLODE. The liquid inside is extremely volatile and inflammable.

Delivery within 1-2 weeks
+
Add to wish list

US$13.75
Housed in tough clear plastic so that the internal working can be easily viewed. This serves a dual purpose it demonstrates the transformation of mechanical energy into electrical energy and it can also be used as a dc generator to produce 6v dc when the adaptor (included) with a 20" wire with alligator clips on the end is inserted.
Delivery within 1-2 weeks
+
Add to wish list

US$6.07
An economical, general lab use, 50 gram hanger for slotted weights. Brass base 1.57 inch (40mm) dia. Plated steel shaft 5.75 inch (148mm) length x 0.137 inch (3.46mm) dia. Total height 6 inch (155mm).
Delivery within 1-2 weeks
+
Add to wish list

US$2.24
Hanger for Slotted Weights 10 gm Steel N.P. For slotted weights (# P-150-102 through # P-150-120) and General Lab Use.
Delivery within 1-2 weeks
+
Add to wish list

US$3.95
Hanger for Slotted Weights 50 gm Steel N.P. For slotted weights (# P-150-102 through # P-150-120) and General Lab Use.
Delivery within 1-2 weeks
+
Add to wish list

US$162.09
Designed to be used with round bottom boiling flasks. This durable unit has a 2 analog dials for both temperature control and stirrer speed. Both functions can be used simultaneously if desired. Speed: Up to 1400 RPM. Heating Power: 150W. Maximum Unit Temperature: 450 C (842 F). Top ID: 4.13 Inches (105mm). Top OD: 6.50 Inches (165mm). Receiving Depth: 2.36 Inches (60mm). Unit Height: 6.30 Inches (160mm). Unit Weight: 3.50 lbs (1.59kg). Power: 110V, 60Hz.
In stock
+
Add to wish list

US$7.80
These small carts allow the user and observers to analyze the link between work and energy. Complete with experiment instructions, this cart is perfect for lessons in force and motion.
In stock
+
Add to wish list

US$11.48
Sturdy one piece high impact plastic construction. Aluminum wheel and axle are made from one piece, lets the carriage roll with little resistance. Length about 5.5 inch.
Delivery within 1-2 weeks
+
Add to wish list

US$22.88
Constant speed car for inclined plane experiments. Two speeds fast and slow. Has a upper chamber, 2 inch (50mm) x 2 inch (50mm), to accept weights, to show mass and speed relationship.
Delivery within 1-2 weeks
+
Add to wish list

US$62.80
Graham Condenser. Made from Borosilicate Glass. 500 mm Jacket Length. 24/40 Joint Size.
Delivery within 1-2 weeks
+
Add to wish list

US$6.28
Solid wood with clear lacquer finish. Width: 1 Inch. Height: 5/16 Inch. Frontside: Scaled in Centimeters, divided both edges into Millimeters. Backside: Scaled in Inches, divided into 1/8 Inch.
Delivery within 1-2 weeks
+
Add to wish list

US$28.65
Big demonstration Electroscope, the whole class can see the deflection. Strong metal construction, 6 x 5 x 2.5 inch, total height 7.5 inch, with ball. Transparent removable front glass plate, translucent back plate so that repulsion can easily be observed. With terminal for earthing.
Delivery within 1-2 weeks
+
Add to wish list

US$4.73
Graduated Measuring Cylinder made from heavy Borosilicate Glass. Two part, strong sturdy plastic base, and bumper guard. They are calibrated to contain.
Durable white enamel graduations, single scale.
Delivery within 1-2 weeks
+
Add to wish list

US$7.70
Graduated Measuring Cylinder made from heavy Borosilicate Glass. Two part, strong sturdy plastic base, and bumper guard. They are calibrated to contain. Durable white enamel graduations, single scale.
Delivery within 1-2 weeks
+
Add to wish list

US$22.00
Graduated Measuring Cylinder made from heavy Borosilicate Glass. Two part, strong sturdy plastic base, and bumper guard. They are calibrated to contain. Durable white enamel graduations, single scale.
Delivery within 1-2 weeks
+
Add to wish list

US$1.77
Graduated Cylinder Hex base, molded of chemically resistant translucent polypropylene. Graduations are permanently molded on cylinders and will not fade after repeated autoclaving. Class B tolerance.
Delivery within 1-2 weeks
+
Add to wish list

US$5.20
Graduated Cylinder Hex base, molded of chemically resistant translucent polypropylene. Graduations are permanently molded on cylinders and will not fade after repeated autoclaving. Class B tolerance.
Delivery within 1-2 weeks
+
Add to wish list

US$12.03

All glass strong Hex base Cylinders for added stability. Double graduations to pour and contain.

In stock
+
Add to wish list

US$25.53

All glass strong Hex base Cylinders for added stability. Double graduations to pour and contain.

Delivery within 1-2 weeks
+
Add to wish list

US$1.77
Graduated Cylinder 10 ml: Molded of chemically resistant translucent polypropylene. Graduations are permanently molded on cylinders and will not fade after repeated autoclaving. Class B tolerance. Approx. Dimensions : 5-1/2 Inches Tall by 1/2 Inch Diameter.
Delivery within 1-2 weeks
+
Add to wish list

US$3.77
Plastic with plastic plunger. Slip tip for easy tubing attachment. Clear, visible graduations. For use in Physics and Chemistry Labs for gas law experiments, etc. Non-sterile, supplied without needle.
Delivery within 1-2 weeks
+
Add to wish list

US$8.88
For refraction experiments. Made out of Glass sheet, bubble free. Optically polished on all sides. Edges slightly beveled. 75 mm x 50 mm x 18 mm, Length x Width x Height.
In stock
+
Add to wish list

US$7.05
Borosilicate Glass Stopper ground glass 24/40 joint. Total length about 3.24 inch (80mm), head dia. 0.86 inch (22mm), all dimensions approx.
Delivery within 1-2 weeks
+
Add to wish list

US$41.94
Suitable for High Temperature use. For General Lab, Chemistry use. 1 lb / 12 pcs (approx.) - 10 mm Outside Diameter (approx.). 24" Length(approx.) 1 mm Wall Thickness (approx.)
Delivery within 1-2 weeks
+
Add to wish list

US$34.00
Suitable for High Temperature use. For General Lab, Chemistry use. 1 lb / 9 pcs (approx.) - 12 mm Outside Diameter (approx.). 24" Length(approx.) 1 mm Wall Thickness (approx.)
Delivery within 1-2 weeks
+
Add to wish list

US$34.00
Suitable for High Temperature use. For General Lab, Chemistry use. 1 lb / 33 pcs (approx.) - 5 mm Outside Diameter (approx.). 24" Length(approx.) 1 mm Wall Thickness (approx.).
Delivery within 1-2 weeks
+
Add to wish list

US$34.00
Suitable for High Temperature use. For General Lab, Chemistry use. 1 lb / 15 pcs (approx.) - 8 mm Outside Diameter (approx.). 24" Length(approx.) 1 mm Wall Thickness (approx.).
Delivery within 1-2 weeks
+
Add to wish list

US$15.63
Casted, Aluminum alloy. Hardened Steel cutting wheel, Spring loaded to stay open. Cuts tubing upto 38mm diameter.
In stock
+
Add to wish list

US$16.88
Suitable for bending glass purposes. For General Lab, Chemistry use. 1 lb / 20 pcs (approx.) - 6 mm Outside Diameter (approx.). 24" Length(approx.) 1 mm Wall Thickness (approx.).
Delivery within 1-2 weeks
+